Parting 78 Gmc Dually* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BBEEP · 03-04-2008, 02:11 AM

Quote:

Originally Posted by hessian18

Im about 30 minutes from Redding..

How much would you like for the dash pad ?? And how is its condition ?

Thanks

I do want to get the seat and the dash pad..

Seat $100, nice but a little dirty. Dash has very minimal cracks. Between speaker holes and one about 1/2 inch between one defrost & windshield, also dirty. Can bring to Kool April Nites for $200 both pieces delivered. But you need to pay before I load, only cause I don't want to haul them for a no-show. You understand I hope.

**too much stuff** · 03-04-2008, 03:32 AM

So, are the door panels available?

BBEEP · 03-04-2008, 07:14 AM

Door panels sold to the first guy who contacted me. He "pm'd" me before anyone asked through the forum. Wish I had 6 sets! since I don't know anyone, it goes to the first, ya know!
John

**jerry moss** · 03-04-2008, 08:32 AM

John,
nice talking to you, payment is on it's way. thanks.

manimal · 03-05-2008, 05:11 PM

Quote:

Originally Posted by BBEEP

Looked on ebay. Seem to go for $150 to $600, plus $50 to $150 for the chrome. Shipping appears around $50 to $60 dollars. I'll have to look in to that. How about $150 plus shipping? I'll go take pics if you're actually interested.

I am waiting to see if I sell my '79 F250,if so then I will pm you about it. Thanks
-Lance

BBEEP · 03-06-2008, 05:54 AM

Still have a lot of nice sheet metal!!

Bumper w/guards, doors, front clip, even one good passenger dually fender, bed, 5th wheel tailgate. Any interest?

Mr79C10 · 03-06-2008, 02:48 PM

Do you have the lower grill trim piece?

manimal · 03-06-2008, 07:14 PM

Hoping to hear back from the guy today on the truck I have for sale....Then I want that rear fender.Thanks
-Lance

BBEEP · 03-06-2008, 10:00 PM

Quote:

Originally Posted by manimal

Hoping to hear back from the guy today on the truck I have for sale....Then I want that rear fender.Thanks
-Lance

Lance,
Again, first come first served. I have somoen that wants both rear fenders. Whoever says go first, of course.
Anyway, pics:
break in the back of the drivers side, scratch on the upper rear of the passenger side. nice trim. $225 pair plus ride.

BBEEP · 03-06-2008, 10:03 PM

Quote:

Originally Posted by Mr79C10

Do you have the lower grill trim piece?

Yup, pics:
Only rust I could find was in the front of the hood. I think there used to be a plastic bug screen (leaf collector!)

BBEEP · 03-07-2008, 05:34 AM

Passenger fender has a 2 by 2 piece pictured that is broken in the shape of a sideways "V" near the light, still attached. The drivers side has a piece missing on the bottom rear about 3 by 6 and a hole the size of a pencil near the marker light.

An offer won't offend me.

manimal · 03-07-2008, 10:11 AM

I think I will pass. Thanks anyway.
-Lance

mexgrhd68 · 03-11-2008, 11:26 AM

Quote:

Originally Posted by BBEEP

Frame running gear under my 50 GMC Bus. Nearly rust free (if it was east coast you might call it 100% n.o.s.!) Everything cheap!

BBEEP, I need the A/C vents along with the insert that goes in the dash(middle vent and passenger vent) how much to visalia,california 93277

BBEEP · 03-13-2008, 12:58 AM

Do You Need The Ducting As Well?

mexgrhd68 · 03-13-2008, 01:04 AM

Quote:

Originally Posted by BBEEP

Do You Need The Ducting As Well?

no, thanks.

BBEEP · 03-14-2008, 06:05 PM

Dually rear end available. $300. It was too wide for the bus. Used a spicer dually that was 8 inches narrower and actually used the same spring perches!

BBEEP · 03-18-2008, 09:41 AM

Quote:

Originally Posted by mexgrhd68

no, thanks.

I'll check to see what they look like & get back to you

mexgrhd68 · 03-20-2008, 12:05 PM

Quote:

Originally Posted by BBEEP

I'll check to see what they look like & get back to you

great!!

BBEEP · 03-30-2008, 12:35 AM

DIFFERENTIAL SOLD!

BBEEP · 03-31-2008, 04:27 AM

Quote:

Originally Posted by mexgrhd68

BBEEP, I need the A/C vents along with the insert that goes in the dash(middle vent and passenger vent) how much to visalia,california 93277

You wouldn't want them.

yosemitesamiam · 05-20-2008, 04:59 AM

How about a driver door and camping mirror?

ed3196499 · 05-21-2008, 10:04 PM

are parts still available? I am looking for some fender emblems

BBEEP · 05-21-2008, 11:10 PM

All sheet metal available. I believe it still has the emblems. Drivers door very nice w/mirror. I want $500 for whats left. Dash seat chassis gone.

03-04-2008, 03:32 AM	#27
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Parting 78 Gmc Dually So, are the door panels available? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-04-2008, 07:14 AM	#28
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Door panels sold to the first guy who contacted me. He "pm'd" me before anyone asked through the forum. Wish I had 6 sets! since I don't know anyone, it goes to the first, ya know! John Last edited by BBEEP; 03-04-2008 at 07:16 AM.

03-04-2008, 08:32 AM	#29
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,940	Re: Parting 78 Gmc Dually John, nice talking to you, payment is on it's way. thanks. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 03-05-2008 at 12:06 AM.

03-06-2008, 05:54 AM	#31
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Still have a lot of nice sheet metal!! Bumper w/guards, doors, front clip, even one good passenger dually fender, bed, 5th wheel tailgate. Any interest?

03-06-2008, 02:48 PM	#32
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: Parting 78 Gmc Dually Do you have the lower grill trim piece? __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

03-06-2008, 07:14 PM	#33
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Parting 78 Gmc Dually Hoping to hear back from the guy today on the truck I have for sale....Then I want that rear fender.Thanks -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

03-07-2008, 05:34 AM	#36
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Passenger fender has a 2 by 2 piece pictured that is broken in the shape of a sideways "V" near the light, still attached. The drivers side has a piece missing on the bottom rear about 3 by 6 and a hole the size of a pencil near the marker light. An offer won't offend me.

03-07-2008, 10:11 AM	#37
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Parting 78 Gmc Dually I think I will pass. Thanks anyway. -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

03-13-2008, 12:58 AM	#39
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Do You Need The Ducting As Well?

03-14-2008, 06:05 PM	#41
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Dually rear end available. $300. It was too wide for the bus. Used a spicer dually that was 8 inches narrower and actually used the same spring perches! Last edited by BBEEP; 03-14-2008 at 06:06 PM.

03-30-2008, 12:35 AM	#44
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually* DIFFERENTIAL SOLD!

05-20-2008, 04:59 AM	#46
yosemitesamiam Registered User Join Date: Oct 2007 Location: Glendora, CA Posts: 34	Re: Parting 78 Gmc Dually* How about a driver door and camping mirror? __________________ 1976 GMC C25 High Sierra Camper Special. 350/TH350

05-21-2008, 10:04 PM	#47
ed3196499 Registered User Join Date: Mar 2007 Location: New Orleans La Posts: 125	Re: Parting 78 Gmc Dually* are parts still available? I am looking for some fender emblems __________________ Ed U.S. Coast Guard BMC (retired)

05-21-2008, 11:10 PM	#48
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually* All sheet metal available. I believe it still has the emblems. Drivers door very nice w/mirror. I want $500 for whats left. Dash seat chassis gone.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.