The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-15-2008, 09:25 PM   #1
87Lowrider
Navy Radioman Veteran
 
87Lowrider's Avatar
 
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,356
Hey BBC gurus I have a Air Gap question??

I have a brand new EDL-1407 with the Air-Gap Performer RPM intake installed on my 454. I called summit today to get a throttle bracket / kickdown bracket. they told me that the Air-Gap didn't have direct support for mounting the bracket and that I'd have to use a universal one that mounts to the back left carb stud (which I have).

Problem is, when I mount it, it's too far forward for the kickdown cable to hook up without extending it all the way forward. Then, there's no travel left to go to WOT.

Thoughts / suggestions?

Thanks!

Kenny
87Lowrider is offline   Reply With Quote
Old 05-15-2008, 10:48 PM   #2
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: Hey BBC gurus I have a Air Gap question??

Lokar
bigblock73 is offline   Reply With Quote
Old 05-16-2008, 12:28 AM   #3
87Lowrider
Navy Radioman Veteran
 
87Lowrider's Avatar
 
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,356
Re: Hey BBC gurus I have a Air Gap question??

duh! - Thanks!
87Lowrider is offline   Reply With Quote
Old 05-16-2008, 01:28 AM   #4
Pyrotechnic
Registered User
 
Pyrotechnic's Avatar
 
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
Re: Hey BBC gurus I have a Air Gap question??

Jegs also makes an aluminum throttle/kickdown cable and return spring bracket that uses the front and rear carb studs on the left side. I really wish Edelbrock would get something together for this manifold.

Last edited by Pyrotechnic; 05-16-2008 at 01:28 AM.
Pyrotechnic is offline   Reply With Quote
Old 05-16-2008, 03:47 AM   #5
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: Hey BBC gurus I have a Air Gap question??

Here is a pic of my 468/Air Gap and Lokar cables
Attached Images
  

Last edited by bigblock73; 05-16-2008 at 03:48 AM.
bigblock73 is offline   Reply With Quote
Old 05-17-2008, 04:11 AM   #6
87Lowrider
Navy Radioman Veteran
 
87Lowrider's Avatar
 
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,356
Re: Hey BBC gurus I have a Air Gap question??

Quote:
Originally Posted by Pyrotechnic View Post
Jegs also makes an aluminum throttle/kickdown cable and return spring bracket that uses the front and rear carb studs on the left side. I really wish Edelbrock would get something together for this manifold.
I'll look it up and see if I can get a part number. I've got a call in to my local speed shop who is a Lokar dealer. I like the one Jeff has above.

Thanks!
87Lowrider is offline   Reply With Quote
Old 05-17-2008, 06:56 AM   #7
Pyrotechnic
Registered User
 
Pyrotechnic's Avatar
 
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
Re: Hey BBC gurus I have a Air Gap question??

How much did the Lokar bracket and throttle/kickdown cables cost all together ?
Pyrotechnic is offline   Reply With Quote
Old 05-27-2008, 07:03 PM   #8
87Lowrider
Navy Radioman Veteran
 
87Lowrider's Avatar
 
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,356
Re: Hey BBC gurus I have a Air Gap question??

Quote:
Originally Posted by Pyrotechnic View Post
How much did the Lokar bracket and throttle/kickdown cables cost all together ?
I have the same system as Jeff does above... It bolts right up.

Part Numbers:
Kickdown cable for the 700R4 - LOK-KD-2700HT $69.50
Bracket - LOK-SRK-4000 $26.00
24" Throttle Cable - LOK-TC-1000HT $45.05

Kenny
87Lowrider is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com