Center console parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prong · 05-28-2008, 01:41 AM

Got a 79 with the factory buckets/console and I'm in need of a couple of the rubber bumpers that the lid rests against when closed and the wire "lid stop" that limits the lid from opening too far. I've looked in LMC and Chevy duty and can't find anything. Does anyone have any suggestions?

**old Rusty C10** · 05-28-2008, 03:23 AM

go to like pep boys they have HELP parts or heck the hardware aisle in the drawers in Lowes both have parts that may not be OEM but will work.. for the wire thing make your own with picture wire and a couple of the wiring terminals

bigblock73 · 05-28-2008, 03:32 AM

The lid stop you should be able to find at a wrecking yard. A lot of these consoles are trashed, but that is usually the one part that survives OK. The bumpers aren't reproduced...but you can use others and modify to work. I used glove box bumpers on my console...and trimmed the cone portion down to fit. On the console I restored and sold, the hole for the bumper was larger so I couldn't use that method, instead, I purchased license plate bumpers off an older impala, and trimmed them down to fit. Hope this helps some.

05-28-2008, 01:41 AM	#1
Prong Registered User Join Date: May 2007 Location: CO Posts: 475	Center console parts? Got a 79 with the factory buckets/console and I'm in need of a couple of the rubber bumpers that the lid rests against when closed and the wire "lid stop" that limits the lid from opening too far. I've looked in LMC and Chevy duty and can't find anything. Does anyone have any suggestions?

05-28-2008, 03:23 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Center console parts? go to like pep boys they have HELP parts or heck the hardware aisle in the drawers in Lowes both have parts that may not be OEM but will work.. for the wire thing make your own with picture wire and a couple of the wiring terminals __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-28-2008, 03:32 AM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Center console parts? The lid stop you should be able to find at a wrecking yard. A lot of these consoles are trashed, but that is usually the one part that survives OK. The bumpers aren't reproduced...but you can use others and modify to work. I used glove box bumpers on my console...and trimmed the cone portion down to fit. On the console I restored and sold, the hole for the bumper was larger so I couldn't use that method, instead, I purchased license plate bumpers off an older impala, and trimmed them down to fit. Hope this helps some. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 05-28-2008 at 03:32 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.