edc pulley - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gmclowsierra · 05-30-2008, 02:41 AM

looking for the double v belt pulley for the alt to run my edc. its for an 85 gmc truck

Square84 · 05-30-2008, 07:20 AM

Go To A Parts Store And Ask If They Have Any Cores In The Back For Dodges Alot Of Them Had Double Pulley That Will Interchange.

hotrodhomi · 05-30-2008, 07:24 AM

Do you have any local places that rebuild alternators? They would have one. If not, junk yard.

sjarrett71 · 05-31-2008, 10:03 AM

If this is a want ad you have to be a paid subscriber. FYI

gmclowsierra · 06-01-2008, 01:55 AM

not looking for one just interested on where to find one

hotrodhomi · 06-01-2008, 02:50 AM

Mine is driven from my water pump and uses an idler pulley.

smashingchuck · 06-01-2008, 10:02 AM

Quote:

Originally Posted by hotrodhomi

Mine is driven from my water pump and uses an idler pulley.

I drive mine off the power steering pulley...

gmclowsierra · 06-01-2008, 06:14 PM

do you guys have pics? im still trying ti figure out how to mount the york. i thought about doing the water pump and idler pulley but i was afraid it will put to much strain on the bearings in the pump. i have ac and was planning on mounting the edc below the alt. thanks guys for the help.

hotrodhomi · 06-01-2008, 08:39 PM

Quote:

Originally Posted by gmclowsierra

do you guys have pics? im still trying ti figure out how to mount the york. i thought about doing the water pump and idler pulley but i was afraid it will put to much strain on the bearings in the pump. i have ac and was planning on mounting the edc below the alt. thanks guys for the help.

http://67-72chevytrucks.com/vboard/s...highlight=york

smashingchuck · 06-01-2008, 09:00 PM

here's mine. I will soon be incorporating a sanden in the mix as I am adding A/C. I got the brackets for the sanden from Alan Groove. I made the york bracket a long time ago.

gmclowsierra · 06-02-2008, 05:40 PM

so have you had any issues with the power steering pump are the alternator. where are you planing on putting the sanden compressor for the a/c? thanks again for all the help. bye the way mine has a/c so above the power steering pump is out of the question. thats why i thought i would try and mount mine under the alt. in place of the air pump. thanks again for the help

hotrodhomi · 06-02-2008, 05:55 PM

Quote:

Originally Posted by gmclowsierra

so have you had any issues with the power steering pump are the alternator. where are you planing on putting the sanden compressor for the a/c? thanks again for all the help. bye the way mine has a/c so above the power steering pump is out of the question. thats why i thought i would try and mount mine under the alt. in place of the air pump. thanks again for the help

What side is your alternator and A/C compressor on? I had my EDC mounted above my PS so that I could run a vintage AC compressor on the passenger side.

gmclowsierra · 06-02-2008, 06:23 PM

my alt is on the driver side and the a/c is on the passenger side above the power steering pump

hotrodhomi · 06-02-2008, 06:52 PM

do you have pictures? I've never seen PS in the passenger side before.

gmclowsierra · 06-02-2008, 06:56 PM

sorry driver side for the ac and p/s pump and pass for the alt

smashingchuck · 06-02-2008, 11:29 PM

My alternator will be mounted very high above the water pump slightly to the passenger side. The sanden will be close to the factory alternator position, only further outboard.

05-30-2008, 02:41 AM	#1
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	edc pulley looking for the double v belt pulley for the alt to run my edc. its for an 85 gmc truck

05-30-2008, 07:20 AM	#2
Square84 I don't think these pills work Join Date: Apr 2008 Location: burkburnett,Tx Posts: 626	Re: edc pulley Go To A Parts Store And Ask If They Have Any Cores In The Back For Dodges Alot Of Them Had Double Pulley That Will Interchange. __________________ SQUARE84 90 SUBURBAN

05-30-2008, 07:24 AM	#3
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: edc pulley Do you have any local places that rebuild alternators? They would have one. If not, junk yard. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

05-31-2008, 10:03 AM	#4
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: edc pulley If this is a want ad you have to be a paid subscriber. FYI __________________ -Scott-

06-01-2008, 01:55 AM	#5
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: edc pulley not looking for one just interested on where to find one

06-01-2008, 02:50 AM	#6
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: edc pulley Mine is driven from my water pump and uses an idler pulley. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

06-01-2008, 06:14 PM	#8
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: edc pulley do you guys have pics? im still trying ti figure out how to mount the york. i thought about doing the water pump and idler pulley but i was afraid it will put to much strain on the bearings in the pump. i have ac and was planning on mounting the edc below the alt. thanks guys for the help.

06-01-2008, 09:00 PM	#10
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: edc pulley here's mine. I will soon be incorporating a sanden in the mix as I am adding A/C. I got the brackets for the sanden from Alan Groove. I made the york bracket a long time ago. __________________ 78 Build Thread 4Runner Build Last edited by smashingchuck; 06-01-2008 at 09:01 PM.

06-02-2008, 05:40 PM	#11
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: edc pulley so have you had any issues with the power steering pump are the alternator. where are you planing on putting the sanden compressor for the a/c? thanks again for all the help. bye the way mine has a/c so above the power steering pump is out of the question. thats why i thought i would try and mount mine under the alt. in place of the air pump. thanks again for the help

06-02-2008, 06:23 PM	#13
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: edc pulley my alt is on the driver side and the a/c is on the passenger side above the power steering pump

06-02-2008, 06:52 PM	#14
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: edc pulley do you have pictures? I've never seen PS in the passenger side before. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

06-02-2008, 06:56 PM	#15
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: edc pulley sorry driver side for the ac and p/s pump and pass for the alt

06-02-2008, 11:29 PM	#16
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: edc pulley My alternator will be mounted very high above the water pump slightly to the passenger side. The sanden will be close to the factory alternator position, only further outboard. __________________ 78 Build Thread 4Runner Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.