Best Engine Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldgold70c10** · 06-16-2008, 07:37 PM

My current engine mounts are only about 2 years old and the driver's side mount already feels like its come apart, and I'm going to be pulling the engine in a month or so (finally decided to rebuilt the 350). Any suggestions on what brand/ where to get engine the best mounts? Do most better new mounts have a retainer in case the rubber part does seperate? What are the good ones?

caminokid · 06-16-2008, 08:45 PM

I would say anything that is made out of urathene is better then rubber.

Sport/Truck · 06-16-2008, 08:45 PM

This has come up before, and had me concerned too. But I think all the motor mounts sold today will be the type to have a safety build in. (for liability issues).
I got a set from NAPA and they look real nice....coming from India! IIRC Auto zone had the same ones, they just didn't look as nice.
I guess it didn't matter because I ended up having to grind on it to clear my bracket!
s/t

PipsC10 · 06-16-2008, 09:03 PM

I just ordered a pair from Summit and they are great quality and fit perfect. They were a lot cheaper than CPP or anyone else, I think 15 bucks cheaper for just as good if not better quality.

06-16-2008, 07:37 PM	#1
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,025	Best Engine Mounts My current engine mounts are only about 2 years old and the driver's side mount already feels like its come apart, and I'm going to be pulling the engine in a month or so (finally decided to rebuilt the 350). Any suggestions on what brand/ where to get engine the best mounts? Do most better new mounts have a retainer in case the rubber part does seperate? What are the good ones? __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

06-16-2008, 08:45 PM	#2
caminokid Chevy nut Join Date: Jun 2007 Location: Springfield, Illinois Posts: 2,266	Re: Best Engine Mounts I would say anything that is made out of urathene is better then rubber. __________________ 84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!"

06-16-2008, 08:45 PM	#3
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Best Engine Mounts This has come up before, and had me concerned too. But I think all the motor mounts sold today will be the type to have a safety build in. (for liability issues). I got a set from NAPA and they look real nice....coming from India! IIRC Auto zone had the same ones, they just didn't look as nice. I guess it didn't matter because I ended up having to grind on it to clear my bracket! s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

06-16-2008, 09:03 PM	#4
PipsC10 Registered User Join Date: Jan 2008 Location: Oakdale, Ca Posts: 655	Re: Best Engine Mounts I just ordered a pair from Summit and they are great quality and fit perfect. They were a lot cheaper than CPP or anyone else, I think 15 bucks cheaper for just as good if not better quality. __________________ 1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.