Ignition Switch

[Bentblazer]

Having problems removing ignition switch and bezel. Removed wiring harness. Switch and bezel rotate in dash not sure what to do next. I'm sure its simple, just seem to be missing it. Would also like to be able to put harness back on once out as I sill start and move blazer occasionally. What am I missing?

[Alexis]

Edit: deleted everything cause I was wrong

Here is a thread that will give you the anwser.

CLICK ME

Worked first try! Turn switch to acc first, THEN push in paper clip and turn further counter clockwise, pull out with key as you jiggle and hold mouth just so and out it comes!

[Bentblazer]

Thanks, Knew I had to use a paper clip but wasn't sure about key position, will try in the am. Thanks again