|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-17-2008, 04:57 PM
|
#1 |
|
Packrat
Join Date: May 2008
Location: Central Iowa
Posts: 459
|
confirmed: I need an engine.... in Iowa.
it smoked up a storm (blue) getting it to the shop, and couldn't go very high on revs... would knock too much.....
cam is pretty flat.... I can get a 350 that was recently built with a 327 cam, but had some issues... for $100... and take that to a builder, or I can just go with some form of crate.... it's gonna be a year or more before I get to doing an real resto work on this thing. Ijust want something I can haul with a putt around town in.... thoughts?
__________________
gone: --'07 Tahoe LTZ 4WD --'68 Firebird 400 Convertible gone: --'72 Chevy K20 Last edited by 72-c20; 06-17-2008 at 04:58 PM. |
|
|
|
06-17-2008, 05:01 PM
|
#2 |
|
Registered User
 
Join Date: Jan 2008
Location: Chesapeake Beach, MD
Posts: 812
|
Re: confirmed: I need an engine.... in Iowa.
depends on your funds really. but you can get a nice GM crate 350 for around 1500 or so
__________________
71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103  http://i195.photobucket.com/albums/z...en58/001-2.jpg |
|
|
|
|
06-17-2008, 05:16 PM
|
#3 |
|
Registered User
 
Join Date: May 2008
Location: Filer, Idaho
Posts: 416
|
Re: confirmed: I need an engine.... in Iowa.
I went with a GM crate motor 45000 miles ago and was very happy until I put the NV4500 in now I need a better cam,2300 rpm at 75mph and 14 mpg could be better with cam the stock does not have the low end I need for that.
__________________
you never know what you can do until you have to undo something you have done! 
|
|
|
|
|
06-17-2008, 05:29 PM
|
#4 |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 26,083
|
Re: confirmed: I need an engine.... in Iowa.
-
I'd do some looking on craigslist. There has to be some engines floating around Des Moines. You might check with board member IvelDesigns (Levi). He might know of something.... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
07-07-2008, 10:44 PM
|
#5 |
|
Packrat
Join Date: May 2008
Location: Central Iowa
Posts: 459
|
Re: confirmed: I need an engine.... in Iowa.
since I didn't have the time/space to do the work, I endedup having a new GoodWrench crate 350 put in... 250 hp, 3 yr - 100,000 mile warranty.
just used my intake manifold and Holley carb. it runs really good now...
__________________
gone: --'07 Tahoe LTZ 4WD --'68 Firebird 400 Convertible gone: --'72 Chevy K20 |
|
|
|
|
07-08-2008, 12:42 PM
|
#6 |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 26,083
|
Re: confirmed: I need an engine.... in Iowa.
-
Sounds good. Glad you are back on the road. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
