stupid dash question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 02-05-2003, 11:27 PM

I think I know the answer, but I want to ask the experts.

I purchased 89 Blazer doors for my 73, if I wanted to convert to a 81+ dash pad (to better match the doors), do I need to get a newer model (81+) bezel or can I re-use my 73 bezel. I know the light switch hole will be larger on a newer bezel...but is that the only difference? Also, I want to buy a aluminum overlay and some places have them seperated by year with different part numbers...why is this?

TIA - Jeff

78SilveradoSWB · 02-06-2003, 03:17 PM

Jeff:

I think the wiper square is also smaller in the 73 vs. 75-83 dash bezel if I am not mistaken. I have a 76 dash bezel and the wiper square opening is 2" X 7/8". I also have a billet dash bezel and had to buy the 73-77 one. The 73-77 dash bezels are raised and I believe 78-80 is different because of the 3 recessed sections and the 81-87 has a slightly different angle and single recessed section. If you choose to change the dash pad to 81 vintage, you'll need to change the bezel, due to the slight angle change. Also the front bezel along the front of the dash pad would change to match the curvature of the pad. Hope this helps.

PHOENIX · 02-06-2003, 03:26 PM

Damn thats a stupid question, Im not even gonna answer that stupid question. Just kidding, I think you will need a different bezel, I couldnt use the one you sent me cause the same problem, I passed it along to another member for free also.

You sent me a 75? and I have an 83, no go.

BigRed · 02-06-2003, 03:50 PM

Quote:

Originally posted by PHOENIX
Damn thats a stupid question, Im not even gonna answer that stupid question. Just kidding, I think you will need a different bezel, I couldnt use the one you sent me cause the same problem, I passed it along to another member for free also.

You sent me a 75? and I have an 83, no go.

Yep, and I'm glad it didn't fit.

I'm reeping the rewards.

PHOENIX · 02-06-2003, 05:02 PM

That sure is one clean bezel Jeff gave us for nothing! What a guy.

bigblock73 · 02-06-2003, 06:48 PM

aawww ggeee, thanks Eddie.

Alot of times people who are in this hobby turn it into a business and lose touch of the hobby side. I had the bezel just sitting on the shelf collecting dust, you mentioned you needed one, so since mine was doing no good I gave it to you. I could have easily tried to sell it on E-bay, but since I consider you a friend why not try and help you out. Now I can see if it were a box, cab, or doors...something actally worth money it would be a different story. I am a firm believer what goes around comes around, if you are nice to people they will be nice back. Glad I could help out a fellow enthuisast, that is why I like this place!

Now on a different note...can anyone find me a non-AC 81+ bezel? it doesn't matter how clean the painted chrome is, I just need a straight bezel so I can "hallow" out the upper half where the gauges go beacuse i am putting Autometers up there with an aluminum insert.

Any leads would be appreciated...dash pad too!

Thanks - Jeff

PHOENIX · 02-06-2003, 07:00 PM

I would like the same thing, but Jeff has first dibs (is that right, dibs?).

**Captkaos** · 02-06-2003, 07:06 PM

Jeff, +81 NON A/C and Chrome? right? Let me look....

If you plan to use a newer model, from memory, the windshield washer switch and headlight switch are in different locations.....

bigblock73 · 02-06-2003, 09:34 PM

Quote:

Originally posted by Captkaos
Jeff, +81 NON A/C and Chrome? right? Let me look....

If you plan to use a newer model, from memory, the windshield washer switch and headlight switch are in different locations.....

Chris, thanks!

BTW - I don't want a "chrome" one, I was referring to the chrome/silver paint around the gauge circles/wiper opening...I just want a plain black one that isn't craked or broken...plain jane model I guess.

-Jeff

**Captkaos** · 02-07-2003, 12:59 PM

Plane Jane, that might be easier. I will dig around the garage this weekend and let you know.....

PHOENIX · 02-07-2003, 01:08 PM

You wouldnt happen to have 2 of those would you?

**Captkaos** · 02-07-2003, 04:19 PM

2 non A/C? Not sure. How about a list of all the crap I have.. I need to inventory anyway....

BTW, we just GAVE a '79 complete cab away - I kept its crossmember of course...

PHOENIX · 02-07-2003, 04:48 PM

If you had another non-A/C bezel for a 81+ I would be willing to buy it off you. Just PM me if you have an extra one (after you get Jeff one). I would also like one with pretty much no damage. Mine is cracked by the sterio and around a few screws, it kinda bugs me. Plus I dont have AC, so I have two big holes, its not pretty

**Captkaos** · 02-10-2003, 11:56 AM

Well I check in the 3 places stuff is spread over and no NON-A/C. Sorry. I have one, but it has been mangled where the owner cut a hole for a switch?, no idea what it was for though. I will keep an eye out...

PHOENIX · 02-10-2003, 12:22 PM

I would appreciate it very much.

02-05-2003, 11:27 PM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	stupid dash question I think I know the answer, but I want to ask the experts. I purchased 89 Blazer doors for my 73, if I wanted to convert to a 81+ dash pad (to better match the doors), do I need to get a newer model (81+) bezel or can I re-use my 73 bezel. I know the light switch hole will be larger on a newer bezel...but is that the only difference? Also, I want to buy a aluminum overlay and some places have them seperated by year with different part numbers...why is this? TIA - Jeff

02-06-2003, 03:17 PM	#2
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Jeff: I think the wiper square is also smaller in the 73 vs. 75-83 dash bezel if I am not mistaken. I have a 76 dash bezel and the wiper square opening is 2" X 7/8". I also have a billet dash bezel and had to buy the 73-77 one. The 73-77 dash bezels are raised and I believe 78-80 is different because of the 3 recessed sections and the 81-87 has a slightly different angle and single recessed section. If you choose to change the dash pad to 81 vintage, you'll need to change the bezel, due to the slight angle change. Also the front bezel along the front of the dash pad would change to match the curvature of the pad. Hope this helps. __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400 Last edited by 78SilveradoSWB; 02-06-2003 at 03:20 PM.

02-06-2003, 03:26 PM	#3
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Damn thats a stupid question, Im not even gonna answer that stupid question. Just kidding, I think you will need a different bezel, I couldnt use the one you sent me cause the same problem, I passed it along to another member for free also. You sent me a 75? and I have an 83, no go. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-06-2003, 05:02 PM	#5
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	That sure is one clean bezel Jeff gave us for nothing! What a guy. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-06-2003, 07:00 PM	#7
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I would like the same thing, but Jeff has first dibs (is that right, dibs?). __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-06-2003, 06:48 PM	#6
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	aawww ggeee, thanks Eddie. Alot of times people who are in this hobby turn it into a business and lose touch of the hobby side. I had the bezel just sitting on the shelf collecting dust, you mentioned you needed one, so since mine was doing no good I gave it to you. I could have easily tried to sell it on E-bay, but since I consider you a friend why not try and help you out. Now I can see if it were a box, cab, or doors...something actally worth money it would be a different story. I am a firm believer what goes around comes around, if you are nice to people they will be nice back. Glad I could help out a fellow enthuisast, that is why I like this place! Now on a different note...can anyone find me a non-AC 81+ bezel? it doesn't matter how clean the painted chrome is, I just need a straight bezel so I can "hallow" out the upper half where the gauges go beacuse i am putting Autometers up there with an aluminum insert. Any leads would be appreciated...dash pad too! Thanks - Jeff

02-06-2003, 07:06 PM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Jeff, +81 NON A/C and Chrome? right? Let me look.... If you plan to use a newer model, from memory, the windshield washer switch and headlight switch are in different locations..... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-07-2003, 12:59 PM	#10
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Plane Jane, that might be easier. I will dig around the garage this weekend and let you know..... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-07-2003, 01:08 PM	#11
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	You wouldnt happen to have 2 of those would you? __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-07-2003, 04:19 PM	#12
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	2 non A/C? Not sure. How about a list of all the crap I have.. I need to inventory anyway.... BTW, we just GAVE a '79 complete cab away - I kept its crossmember of course... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-07-2003, 04:48 PM	#13
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	If you had another non-A/C bezel for a 81+ I would be willing to buy it off you. Just PM me if you have an extra one (after you get Jeff one). I would also like one with pretty much no damage. Mine is cracked by the sterio and around a few screws, it kinda bugs me. Plus I dont have AC, so I have two big holes, its not pretty __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-10-2003, 11:56 AM	#14
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Well I check in the 3 places stuff is spread over and no NON-A/C. Sorry. I have one, but it has been mangled where the owner cut a hole for a switch?, no idea what it was for though. I will keep an eye out... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-10-2003, 12:22 PM	#15
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I would appreciate it very much. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.