Rust Free Cabs in the Midwest?? Still need help~! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brewski* · 02-09-2003, 11:24 PM

Does anyone know who to get ahold of to acquire one of these Rust Free A/C Cabs? I may be looking to remove and replace my cab do to some rust and other issues. Would like one with doors still intact My truck is a 1971 GMC 3/4 ton. Any help is much appreciated as I am trying to turn the RED ROCKET back into the BLACK BETTY she origionally was, and I want to do it as close to 100% as possible without rebuilding stuff with patches. Thanks for all your help

O'l Buck · 02-09-2003, 11:45 PM

All I can do is wish you good luck. I have yet to see a rust free cab in my area......let alone a rust free A/C cab. Good luck.

**Joesjunk** · 02-10-2003, 12:32 AM

I have a perfect 69 cab and doors with original paint in Independence, MO. No a/c. Not cheap

. PM me if you are interested. Thanks, Joe

jeffbo · 02-10-2003, 12:37 AM

I'll have to agree with Ol Buck. Good luck.

Mudder · 02-10-2003, 02:52 AM

You can find them. Just got to get out and start looking. Junk yards are just that.........junk. Look around small time garages, that maybe have an old wrecker or two there and some vehicles sitting around. I went to Okla to get one and after I got it home I ended up buying one right down the road from my house for 100 bucks that didnt have any rust. You may have to buy a whole truck.

AndrewDT · 02-10-2003, 01:47 PM

My Burb was a rusty MN truck so I went all the way to TX to get a "rust free" body. I still replaced the rockers and some of the floor. It was much better than a MN truck but I don't think there is such a thing as "rust free".

02-09-2003, 11:24 PM	#1
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Rust Free Cabs in the Midwest?? Still need help~! Does anyone know who to get ahold of to acquire one of these Rust Free A/C Cabs? I may be looking to remove and replace my cab do to some rust and other issues. Would like one with doors still intact My truck is a 1971 GMC 3/4 ton. Any help is much appreciated as I am trying to turn the RED ROCKET back into the BLACK BETTY she origionally was, and I want to do it as close to 100% as possible without rebuilding stuff with patches. Thanks for all your help

02-09-2003, 11:45 PM	#2
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	All I can do is wish you good luck. I have yet to see a rust free cab in my area......let alone a rust free A/C cab. Good luck. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

02-10-2003, 12:32 AM	#3
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,710	I have a perfect 69 cab and doors with original paint in Independence, MO. No a/c. Not cheap . PM me if you are interested. Thanks, Joe __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

02-10-2003, 12:37 AM	#4
jeffbo D.U.F. Member Join Date: Nov 2002 Location: Huron/Brookings, SD Posts: 288	I'll have to agree with Ol Buck. Good luck. __________________ MEMBER OF THE DISCS UP FRONT CLUB '72 C-10 LWB Highlander, A/C, tilt TH350 w/ B&M shift kit, 327LJ bored .040", cast flattops, forged crank, L31 Vortecs, 9.25:1 CR, Comp conical valvesprings, Crane Energizer single pattern 216/.454", Professional Products Power Plus Crosswind intake, Edelbrock #1406 600cfm, HEI, dual exhaust, open 3.08 12bolt '68 C-10 4spd (not running) '79 C-10 LWB Mild 350 '80 Caprice Classic, 2-dr '97 GMC K-1500, SWB, Reg. Cab, Z-71, 5.7, Auto

02-10-2003, 01:47 PM	#6
AndrewDT Registered User Join Date: Jul 2001 Location: North Woods, Minnesota Posts: 196	My Burb was a rusty MN truck so I went all the way to TX to get a "rust free" body. I still replaced the rockers and some of the floor. It was much better than a MN truck but I don't think there is such a thing as "rust free". __________________ '72 Suburban 4X4 "Save the Earth, kill yourself"

02-10-2003, 02:52 AM	#5
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	You can find them. Just got to get out and start looking. Junk yards are just that.........junk. Look around small time garages, that maybe have an old wrecker or two there and some vehicles sitting around. I went to Okla to get one and after I got it home I ended up buying one right down the road from my house for 100 bucks that didnt have any rust. You may have to buy a whole truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.