Another project! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smashingchuck · 08-10-2008, 06:49 PM

After watching this truck exchange hands among friends a few times, it was finally time for me to grab the bull by the horns. I picked this up today. Its an 87 Silverado with 3/4 ton axles (4.56 gears) and some sort of small lift kit (add a leaves in the back and new springs up front). It's got some rust, but I'll fix it later.... right now I have to find an engine for it as the original owner removed it before he sold it. Not bad for $500...

ed3196499 · 08-10-2008, 06:53 PM

NICE! I cant wait till its my turn to find one of these sweet deals. Is there a sign up sheet or something?

S10Fan · 08-10-2008, 07:07 PM

Quote:

Originally Posted by ed3196499

NICE! I cant wait till its my turn to find one of these sweet deals. Is there a sign up sheet or something?

LOL!

I must have missed it too.

cochino12 · 08-10-2008, 07:12 PM

thats a good looking truck, good buy!

smashingchuck · 08-10-2008, 07:42 PM

Quote:

Originally Posted by cochino12

thats a good looking truck, good buy!

it's not as clean as the ones somebody finds out west...

but overall I think it was a good buy even with the Michigan Cancer.

**old Rusty C10** · 08-10-2008, 08:52 PM

heck id have bought it its alot better start than my project was good luck with it

thirdstreettito · 08-10-2008, 09:04 PM

Nice find! What kind of trailer is that? How much $$? Where'd ya get it?

Poopski · 08-11-2008, 01:42 AM

Gonna lower it? Its 2wd right?

thirdstreettito · 08-11-2008, 02:19 AM

Quote:

Originally Posted by Poopski

Gonna lower it? Its 2wd right?

Sarcasm right? The front axle is right there, visible...

rod86 · 08-11-2008, 05:26 AM

thats a pretty sweet find you got there...

70LonghornCST · 08-11-2008, 05:36 AM

Man, what a deal! Have fun with it!

smashingchuck · 08-11-2008, 10:57 AM

Quote:

Originally Posted by thirdstreettito

Nice find! What kind of trailer is that? How much $$? Where'd ya get it?

I can't remember much about it. I think it was made in Kentucky. I rebuilt the thing from the ground up a few years ago (redecked it, rewired it, built fenders for it, redid the tung and landing gear, all new bearings, and painted it). I've got about $1500 in it total, but it was a wreck when I bought it.

Quote:

Originally Posted by Poopski

Gonna lower it? Its 2wd right?

ummmm NO. If anything it will be going up. Already have a low one...

Hoods69BadBowTie · 08-11-2008, 01:36 PM

Quote:

Originally Posted by thirdstreettito

Sarcasm right? The front axle is right there, visible...

LOL thats exactly what I was going to say. Thats a pretty sweet looking truck I like it. I think it would look awesome with a small lift on it and some tires and rims.

jchav62 · 08-11-2008, 02:10 PM

Nice score! Good looking truck... Only $500? Wow! Congrats...

ChaseDale3and8 · 08-11-2008, 02:50 PM

Real nice truck for $500! I never get that lucky! Looks like a 4 inch lift is already on it, so 33s would fit with no problem. ...Joe

smashingchuck · 08-11-2008, 11:42 PM

Quote:

Originally Posted by ChaseDale3and8

Real nice truck for $500! I never get that lucky! Looks like a 4 inch lift is already on it, so 33s would fit with no problem. ...Joe

yeah, it's got 4" lift on it already as far as I can tell. One of the previous owners had 33 inch boggers on it. How much more do I need to go to clear 35's? I'm thinking 2" shackles up front and maybe move the leaf spring perches down or a shackle flip in back. Also maybe a 1 or two inch body lift but I don't like how the fuel tank hangs down so I'd have to do some mods on that as well.

CUZICAN_RYDA · 08-11-2008, 11:57 PM

Nice find bro. Good Luck on the build this should be one nice truck when it's finished considering what you have to start with.

smashingchuck · 08-13-2008, 11:30 AM

will 15" 8 lug wheels work with these axles?

smashingchuck · 08-16-2008, 07:05 PM

picked up a motor and some other goodies today for $800... 6000 miles on the motor, brand new dizzy, brand new chrome alternator, flex plate... basically everything except a carb and spark plug wires.

abebummy26 · 08-16-2008, 07:16 PM

At least 6" of lift for 35s.

smashingchuck · 08-16-2008, 07:31 PM

Quote:

Originally Posted by abebummy26

At least 6" of lift for 35s.

thanks. Thats what I thought but I wasn't sure.

abebummy26 · 08-16-2008, 07:43 PM

No problem always glad to help somebody else out!

smashingchuck · 08-16-2008, 07:46 PM

Quote:

Originally Posted by abebummy26

No problem always glad to help somebody else out!

well in that case, do you think I can get away with giving it two more inches of suspension lift and still use the stock drive shafts like I am now? The current set up is all springs. I would use a shackle in the front and a 2 or three inch block in the back.

abebummy26 · 08-17-2008, 10:31 PM

You will probably have to lengthen them. My understanding is any thing more than 4" you have to lengthen them. You should probably ask over in the 4x4 forum though

Dudewith4x4 · 12-23-2009, 04:34 PM

You could always buy a 2-3" body lift if bigger tires is what you want.. Body lifts are cheap and easy to put on also.

08-10-2008, 06:49 PM	#1
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Another project! After watching this truck exchange hands among friends a few times, it was finally time for me to grab the bull by the horns. I picked this up today. Its an 87 Silverado with 3/4 ton axles (4.56 gears) and some sort of small lift kit (add a leaves in the back and new springs up front). It's got some rust, but I'll fix it later.... right now I have to find an engine for it as the original owner removed it before he sold it. Not bad for $500... Attached Images __________________ 78 Build Thread 4Runner Build

08-10-2008, 06:53 PM	#2
ed3196499 Registered User Join Date: Mar 2007 Location: New Orleans La Posts: 125	Re: Another project! NICE! I cant wait till its my turn to find one of these sweet deals. Is there a sign up sheet or something? __________________ Ed U.S. Coast Guard BMC (retired)

08-10-2008, 07:12 PM	#4
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: Another project! thats a good looking truck, good buy! __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

08-10-2008, 08:52 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Another project! heck id have bought it its alot better start than my project was good luck with it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-10-2008, 09:04 PM	#7
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Another project! Nice find! What kind of trailer is that? How much $$? Where'd ya get it? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

08-11-2008, 01:42 AM	#8
Poopski Registered User Join Date: Jul 2007 Location: Joplin MO Posts: 35	Re: Another project! Gonna lower it? Its 2wd right? __________________ 1985 Chevrolet C10 305 2wd LOOOOONG Bed Broke as a joke and funny as a funeral

08-11-2008, 05:26 AM	#10
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: Another project! thats a pretty sweet find you got there... __________________ rod 86 chevy c10 silverado

08-11-2008, 05:36 AM	#11
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Another project! Man, what a deal! Have fun with it! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

08-11-2008, 02:10 PM	#14
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Another project! Nice score! Good looking truck... Only $500? Wow! Congrats... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

08-11-2008, 02:50 PM	#15
ChaseDale3and8 Registered User Join Date: Jun 2007 Location: Springfield Mo. Posts: 1,086	Re: Another project! Real nice truck for $500! I never get that lucky! Looks like a 4 inch lift is already on it, so 33s would fit with no problem. ...Joe __________________ I'm not speedin'! I'm qualifyin'!

08-11-2008, 11:57 PM	#17
CUZICAN_RYDA Registered User Join Date: Aug 2008 Location: "The Park", Maryland Posts: 29	Re: Another project! Nice find bro. Good Luck on the build this should be one nice truck when it's finished considering what you have to start with. __________________ Enigma comin '09 Low-Riders.com

08-13-2008, 11:30 AM	#18
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Another project! will 15" 8 lug wheels work with these axles? __________________ 78 Build Thread 4Runner Build

08-16-2008, 07:05 PM	#19
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Another project! picked up a motor and some other goodies today for $800... 6000 miles on the motor, brand new dizzy, brand new chrome alternator, flex plate... basically everything except a carb and spark plug wires. Attached Images __________________ 78 Build Thread 4Runner Build

08-16-2008, 07:16 PM	#20
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: Another project! At least 6" of lift for 35s. __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

08-16-2008, 07:43 PM	#22
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: Another project! No problem always glad to help somebody else out! __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.



Register or Log In To remove these advertisements.

08-17-2008, 10:31 PM	#24
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: Another project! You will probably have to lengthen them. My understanding is any thing more than 4" you have to lengthen them. You should probably ask over in the 4x4 forum though __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

12-23-2009, 04:34 PM	#25
Dudewith4x4 Momma Tried. Join Date: Dec 2009 Location: Exeter Mo Posts: 319	Re: Another project! You could always buy a 2-3" body lift if bigger tires is what you want.. Body lifts are cheap and easy to put on also. __________________ *Ross* 1980 c10 4x4 project (Sold):http://67-72chevytrucks.com/vboard/s...d.php?t=377155 1999 F-150 4x4 (DD) Saving up for a 64 17 and loving it. AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever!

Register or Log In To remove these advertisements.