Need front end parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ross M. · 08-10-2001, 11:12 PM

I'm looking for a radiator support, a grill, & both headlight assemblies off of a 85-88 Chevy Suburban or Blazer. If you know where I might be able to get some of these used, please let me know. Thanks

**crossy** · 08-11-2001, 10:23 PM

yeah , i have some here at my house . actually 2 frontends complete . 1 apart missing inner wheelwells for $225 and the other complete for $$350 both have straight sheetmetal, but i am in southern ,N.J. ,DAVE all4trux@snip.net

Ross M. · 08-14-2001, 05:41 PM

Dave, thanks for responding with the offer. Unfortunatly, I was mistaken in the year vehicle's parts I want. While consorting with a buddy of mine, I found that the parts I needed were off of a '88-91' not the years I put in my thread above. I may have found what I need here local. I'll know more tommorrow. Again, thanks for the offer bud.

bigd65 · 08-15-2001, 09:20 AM

JUST FOR NFO. I DID THE CONVERTION ON NY 85' AND I LOVE THE LOOK. I PAYED 100.00 BUCKS FOR MINE THEN PAYED 20.00 BUCKS A PIECE FOR NEW HEADLITE BEZELS. I HAVE A FRIEND THAT OWNS A WRECKING YARD IS HOW I GOT MINE SO CHEAP, APPARENTLY THEY ARE HARD TO FIND AND WHEN YOU DO THEY ARE EXPENSIVE.
I WOULD POST PICS BUT I DONT HAVE ANY RIGHT NOW OR A CAMERA AND THEN I DONT EVEN KNOW HOW TO POST THEM.

------------------
85 C10 350/700r4
91'BURB GRILL CONVERTION
HOLLEY STREET DOMINATOR INTAKE
EDELBROCK 1406 COMP. SERIES CARB.
HYPERTECH POWER COIL
FACTORY HEADERS
MAGNAFLOW CAT/MUFFLER/3in. EXHAUST
3.42 REAR GEARS
PROTHANE SUSPENSION-TOTAL KIT
DUAL 13" ELECTRIC FANS
and still going
"thats my toy"
Jeff Dodson
Angleton,Tx.

*Fast68Chevy* · 08-18-2001, 12:19 AM

what exact parts are not same between 81-87 pickups, and 88-91 burbs/blazers ?

The same fenders tubs, and support, or ?

gchemist · 08-20-2001, 06:50 AM

Here is a webpage I have on my site concerning the '91 Suburban grill change.
http://www.geocities.com/abetterchem...rillchnge.html

Major differences are the radiator support, lights and grill pieces. The fenders are the same except for the passenger side. This side has the carb intake fitted in the middle. If you need to keep your truck street legal by using the factory air inlet then you will also need the factory air cleaner and duct. Mine cost about <$500 with all new parts. Dealer parts will cost you well over $1200.00!!! How did I do it? Call your local body shops and find out where they buy their parts. The parts will not be factory pieces but close enough that I like mine. The most expensive part is the radiator support ($95.00). Check your phone book for a place call Parts Net. They sell parts to all the local body shops in my area. I like them because they sell to the public too!! Sure can save you a ton of money.

------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
http://www.geocities.com/abetterchemist/

**crossy** · 08-26-2001, 09:49 PM

it is actually 89-91 burbs and blazers as the 88's still had the conventional 87 -down pick up front end .DAVE

08-10-2001, 11:12 PM	#1
Ross M. Registered User Join Date: Aug 2001 Location: S.C. Posts: 5	Need front end parts I'm looking for a radiator support, a grill, & both headlight assemblies off of a 85-88 Chevy Suburban or Blazer. If you know where I might be able to get some of these used, please let me know. Thanks

08-11-2001, 10:23 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	yeah , i have some here at my house . actually 2 frontends complete . 1 apart missing inner wheelwells for $225 and the other complete for $$350 both have straight sheetmetal, but i am in southern ,N.J. ,DAVE all4trux@snip.net __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-15-2001, 09:20 AM	#4
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	JUST FOR NFO. I DID THE CONVERTION ON NY 85' AND I LOVE THE LOOK. I PAYED 100.00 BUCKS FOR MINE THEN PAYED 20.00 BUCKS A PIECE FOR NEW HEADLITE BEZELS. I HAVE A FRIEND THAT OWNS A WRECKING YARD IS HOW I GOT MINE SO CHEAP, APPARENTLY THEY ARE HARD TO FIND AND WHEN YOU DO THEY ARE EXPENSIVE. I WOULD POST PICS BUT I DONT HAVE ANY RIGHT NOW OR A CAMERA AND THEN I DONT EVEN KNOW HOW TO POST THEM. ------------------ 85 C10 350/700r4 91'BURB GRILL CONVERTION HOLLEY STREET DOMINATOR INTAKE EDELBROCK 1406 COMP. SERIES CARB. HYPERTECH POWER COIL FACTORY HEADERS MAGNAFLOW CAT/MUFFLER/3in. EXHAUST 3.42 REAR GEARS PROTHANE SUSPENSION-TOTAL KIT DUAL 13" ELECTRIC FANS and still going "thats my toy" Jeff Dodson Angleton,Tx. __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

08-20-2001, 06:50 AM	#6
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Here is a webpage I have on my site concerning the '91 Suburban grill change. http://www.geocities.com/abetterchem...rillchnge.html Major differences are the radiator support, lights and grill pieces. The fenders are the same except for the passenger side. This side has the carb intake fitted in the middle. If you need to keep your truck street legal by using the factory air inlet then you will also need the factory air cleaner and duct. Mine cost about <$500 with all new parts. Dealer parts will cost you well over $1200.00!!! How did I do it? Call your local body shops and find out where they buy their parts. The parts will not be factory pieces but close enough that I like mine. The most expensive part is the radiator support ($95.00). Check your phone book for a place call Parts Net. They sell parts to all the local body shops in my area. I like them because they sell to the public too!! Sure can save you a ton of money. ------------------ Gerardo 1983 Custom Truck TX Plates: "BAD BOW" http://www.geocities.com/abetterchemist/ __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

08-26-2001, 09:49 PM	#7
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	it is actually 89-91 burbs and blazers as the 88's still had the conventional 87 -down pick up front end .DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-14-2001, 05:41 PM	#3
Ross M. Registered User Join Date: Aug 2001 Location: S.C. Posts: 5	Dave, thanks for responding with the offer. Unfortunatly, I was mistaken in the year vehicle's parts I want. While consorting with a buddy of mine, I found that the parts I needed were off of a '88-91' not the years I put in my thread above. I may have found what I need here local. I'll know more tommorrow. Again, thanks for the offer bud.

08-18-2001, 12:19 AM	#5
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	what exact parts are not same between 81-87 pickups, and 88-91 burbs/blazers ? The same fenders tubs, and support, or ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.