GRRR carb/fuel filter problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prerunner1982 · 02-20-2003, 05:45 PM

ok not really a carb problem, but its on the carb.. i installed an inline fuel filter, no problem.. took old one out.. was replacing the piece that holds the old fuel finlter in... well it started fine, but cross threaded.. S.O.B.... all cock-eyed.. took it out.. threats are all torn up.. i kept trying to get it straight it wouldnt go.. i tried to seal it but it leaks.. am i just screwed and have to buy a new carb? everything else went good today... inline filter, chrome water neck, finished up vacc lines... something...always something..

LOHRTBT · 02-20-2003, 05:49 PM

Damn....ease up on the stuff "Arnold" haha
Hope it can be fixed man

**swervin ervin** · 02-20-2003, 06:08 PM

No new carb needed. If you can't get it to work, they sell a fuel inlet repair kit. All it is, is a new one that has thread cutting, well, threads. It will cut news threads as it goes in. Will work as good as new. Be sure to remove it after you get it in and clean all the shaving out real good.

Remember two things when it comes to carbs. Be gentle and clean. You can't man handle these things. They will bite you everytime. Don't feel bad, I've crossthreaded a few in my day too.

Keep your head up man. It will get better.

79BIG10 · 02-20-2003, 06:12 PM

I've also done that. I fixed mine with some JB weld on the threads. Let it dry completely then run gas though the carb inlet to get any loose particles out and not in engine. Worked great.

Prerunner1982 · 02-20-2003, 06:14 PM

mike, where did you get the kit? Brandon..that was my next idea.

**swervin ervin** · 02-20-2003, 06:29 PM

Jon,

they are usually in the self help section. You know where they keep all the plastic vacuum line, oil pan plugs, etc. I just called Advance to see if they still sold them. He said they did. I guess Pepboys, Autozone or any of them will have them.

Good luck.

Prerunner1982 · 02-20-2003, 06:38 PM

thank you sir

**swervin ervin** · 02-20-2003, 06:41 PM

Be sure to take your old one with you. There are a few different ones, depending on year. Best I can remember anyway. It's been a long time since I used one.

Prerunner1982 · 02-20-2003, 10:08 PM

went to autozone, they didnt have the repair kit, i picked up an epoxy "weld"... set it tonight will see how it works tomorrow...thanks guys

Prerunner1982 · 02-21-2003, 03:23 PM

it worked..... thanks again.

LOHRTBT · 02-21-2003, 03:33 PM

good deal jon!!

87gmc · 02-22-2003, 07:36 AM

glad to hear you got it fixed, glad i dont have to deal with a carb

Prerunner1982 · 02-23-2003, 03:33 AM

ok..well only thought i had it fixed. its 1:30am just took the carb off.. i tried doing this with the carb in the truck the first time. it started leaking. going to try it one more again. i have to be at work at 3pm tomorrow so in order to get it done gotta do it tonight. anyone wanna come help? i gotta the drinks...

Prerunner1982 · 02-23-2003, 03:11 PM

theres nothing like putting a carb on in the snow, hopefully it will work this time.

pkbinplano · 02-23-2003, 09:25 PM

Let me know if you need a core carb for parts. I got one if its a q-jet

Prerunner1982 · 02-24-2003, 02:05 AM

that would rock man, i got to work and smelled fuel and knew it hadnt worked. i covered that SOB with epoxy but to no avail.. i have never taken a carb apart but could do it in a good day or weekend. and would be a good time to do some of the mods on MIkes site.. pkbinplano what do i owe you?

pkbinplano · 02-24-2003, 08:02 AM

ok its a mod 17084500 hot air choke but you could probly put your elect choke on it. I bought it on Ebay and it got kinda bunged up in shipping. Kinda bent vacume ports. Was replaced n/c by seller. For all I know you might be able to bolt it on and go. Worth a try. Just pay shipping fair enough ? Email me
pkbinplano@msn.com with your address , I'll mail asap
for you soon as your address is recieved.

mtdave2 · 02-24-2003, 12:20 PM

dont you freakin hate them in carb filters. that like the first thing i change on a truck.. just be carfull with that nut! i have stripped one too

Prerunner1982 · 02-24-2003, 04:29 PM

pkbinplano, what all is messed up on the carb? i had planned on taking mine apart and just swapping the bodies.

pkbinplano · 02-24-2003, 06:27 PM

You can do that or try it like it is before you disassemble them both. Don't know if anything is wrong with it, got it off ebay. Just some of the vacume ports dented in shipping. Like I said, may be worth a try. I never tried this carb. Looks ok other than above. Should be able to swap bodies but I'd try it complete first. JMO

Prerunner1982 · 02-24-2003, 09:33 PM

You Got Mail.......

pkbinplano · 02-26-2003, 09:39 AM

Well we are iced in here in Dallas. Second day. No work No school.
Will ship carb asap as soon as I can get out of driveway. About 3 -4 inches solid ice on roads. What a mess !!

02-20-2003, 05:45 PM	#1
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	GRRR carb/fuel filter problem ok not really a carb problem, but its on the carb.. i installed an inline fuel filter, no problem.. took old one out.. was replacing the piece that holds the old fuel finlter in... well it started fine, but cross threaded.. S.O.B.... all cock-eyed.. took it out.. threats are all torn up.. i kept trying to get it straight it wouldnt go.. i tried to seal it but it leaks.. am i just screwed and have to buy a new carb? everything else went good today... inline filter, chrome water neck, finished up vacc lines... something...always something.. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-20-2003, 05:49 PM	#2
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Damn....ease up on the stuff "Arnold" haha Hope it can be fixed man __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-20-2003, 06:08 PM	#3
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	No new carb needed. If you can't get it to work, they sell a fuel inlet repair kit. All it is, is a new one that has thread cutting, well, threads. It will cut news threads as it goes in. Will work as good as new. Be sure to remove it after you get it in and clean all the shaving out real good. Remember two things when it comes to carbs. Be gentle and clean. You can't man handle these things. They will bite you everytime. Don't feel bad, I've crossthreaded a few in my day too. Keep your head up man. It will get better. __________________ Mike 1985 Chevy C-10

02-20-2003, 06:12 PM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	I've also done that. I fixed mine with some JB weld on the threads. Let it dry completely then run gas though the carb inlet to get any loose particles out and not in engine. Worked great. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-20-2003, 06:14 PM	#5
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	mike, where did you get the kit? Brandon..that was my next idea. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-20-2003, 06:29 PM	#6
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Jon, they are usually in the self help section. You know where they keep all the plastic vacuum line, oil pan plugs, etc. I just called Advance to see if they still sold them. He said they did. I guess Pepboys, Autozone or any of them will have them. Good luck.

02-20-2003, 06:38 PM	#7
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	thank you sir __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-20-2003, 06:41 PM	#8
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Be sure to take your old one with you. There are a few different ones, depending on year. Best I can remember anyway. It's been a long time since I used one.

02-20-2003, 10:08 PM	#9
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	went to autozone, they didnt have the repair kit, i picked up an epoxy "weld"... set it tonight will see how it works tomorrow...thanks guys __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-21-2003, 03:23 PM	#10
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	it worked..... thanks again.

02-21-2003, 03:33 PM	#11
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	good deal jon!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-22-2003, 07:36 AM	#12
87gmc I Got My Engine!!!!! Join Date: Oct 2002 Location: Palmer, AK Posts: 253	glad to hear you got it fixed, glad i dont have to deal with a carb __________________ F.O.R.D. "F*cked Over Rebuilt Dodge" -+-+-+-+Cameron+-+-+-+- 1987 GMC HIGH SIERRA LWB 1500 32X11.50 383 TBI/Vortec Heads/Intake MSD Ignition Dual Exhaust Custom Pinstriping Sweet interior & stereo http://www.cgalvin29.freehomepage.com

02-23-2003, 03:33 AM	#13
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	ok..well only thought i had it fixed. its 1:30am just took the carb off.. i tried doing this with the carb in the truck the first time. it started leaking. going to try it one more again. i have to be at work at 3pm tomorrow so in order to get it done gotta do it tonight. anyone wanna come help? i gotta the drinks... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-23-2003, 03:11 PM	#14
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	theres nothing like putting a carb on in the snow, hopefully it will work this time. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-23-2003, 09:25 PM	#15
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	Let me know if you need a core carb for parts. I got one if its a q-jet __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat



Register or Log In To remove these advertisements.

02-24-2003, 02:05 AM	#16
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	that would rock man, i got to work and smelled fuel and knew it hadnt worked. i covered that SOB with epoxy but to no avail.. i have never taken a carb apart but could do it in a good day or weekend. and would be a good time to do some of the mods on MIkes site.. pkbinplano what do i owe you? __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-24-2003, 08:02 AM	#17
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	ok its a mod 17084500 hot air choke but you could probly put your elect choke on it. I bought it on Ebay and it got kinda bunged up in shipping. Kinda bent vacume ports. Was replaced n/c by seller. For all I know you might be able to bolt it on and go. Worth a try. Just pay shipping fair enough ? Email me pkbinplano@msn.com with your address , I'll mail asap for you soon as your address is recieved. __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

02-24-2003, 12:20 PM	#18
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	dont you freakin hate them in carb filters. that like the first thing i change on a truck.. just be carfull with that nut! i have stripped one too __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

02-24-2003, 04:29 PM	#19
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	pkbinplano, what all is messed up on the carb? i had planned on taking mine apart and just swapping the bodies. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-24-2003, 06:27 PM	#20
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	You can do that or try it like it is before you disassemble them both. Don't know if anything is wrong with it, got it off ebay. Just some of the vacume ports dented in shipping. Like I said, may be worth a try. I never tried this carb. Looks ok other than above. Should be able to swap bodies but I'd try it complete first. JMO __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

02-24-2003, 09:33 PM	#21
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	You Got Mail....... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-26-2003, 09:39 AM	#22
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	Well we are iced in here in Dallas. Second day. No work No school. Will ship carb asap as soon as I can get out of driveway. About 3 -4 inches solid ice on roads. What a mess !! __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

Register or Log In To remove these advertisements.