|
12-24-2008, 06:13 PM
|
#1 |
|
Registered User
Join Date: Jun 2008
Location: Yuma, Arizona
Posts: 43
|
NP205 Vent Hole
Greetings
Replaced my seal on the rear output yoke of the NP205 TC. No oil on the drive way for a few days. Checked every day and it was dry. Then today it's bleeding around the seal and dropping oil. So I looked to see if maybe the vent hose is plugged. The question is I don't see a hose so where is the vent located ? Thanks 1972 K10 |
|
|
|
12-24-2008, 08:39 PM
|
#2 |
|
Registered User
Join Date: May 2001
Location: Wairarapa, New Zealand.
Posts: 782
|
Re: NP205 Vent Hole
No hose, just a vent bung thing (White Arrow)...
__________________
1972 K2500 Long Box 400/350 |
|
|
|
|
12-24-2008, 11:17 PM
|
#3 |
|
Registered User
Join Date: Jun 2008
Location: Yuma, Arizona
Posts: 43
|
Re: NP205 Vent Hole
Just the info I needed.
Thanks |
|
|
|
|
12-28-2008, 09:40 PM
|
#4 |
|
Registered User
Join Date: Jun 2008
Location: Yuma, Arizona
Posts: 43
|
Re: NP205 Vent Hole
found the vent hole, but how does it work. The cap feels as if there is a spring underneath. How do I remove for testing
|
|
|
|
|
12-28-2008, 10:26 PM
|
#5 |
|
Registered User
Join Date: May 2001
Location: Wairarapa, New Zealand.
Posts: 782
|
Re: NP205 Vent Hole
Don't know about a spring. Just a crimped cover that should spin on the bung thing. Pretty basic sort of deal. It is a press fit into the casting. I managed to twist/lever my one out.
Bill.
__________________
1972 K2500 Long Box 400/350 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
