quick heater control question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68c10owner · 01-11-2009, 12:39 PM

I`m watching a complete unit on ebay that ends in 5 hours so I could use some help asap. My 84 heater controls are kinda stiff and hard to move left to right. My old 75 gmc was that way and the lever was actually broke off and stuff on heat. Is this a problem with the controls or is it the cables are sticking? Mine work but I`ve already broke the knob off of the fan but I can still move it and the heat/defrost lever is slightly bent and is hard to move. I guess what I need to know is am I looking at the right part to fix my problem? I`ll probably pick the unit up anyway if I can get it cheap enough but I want my controls to work like they did when these trucks were new. How do i accomplish that?

**old Rusty C10** · 01-11-2009, 12:56 PM

alot of the time its the cables and not the selector

68c10owner · 01-11-2009, 01:44 PM

Thanks. Thats what I was thinking but since my levers are a little bent anyway I might just try to pick it up anyway. I`ll try to lube my cables for now. thanks.

**old Rusty C10** · 01-11-2009, 04:17 PM

if you have a non ac truck it may not be too hard to just unhook the cable from the one door and see if that frees it up some... on rare occasions there is a problem with the hinge on the door that causes the problem but like i said above most of the time its the cables

James McClure · 01-11-2009, 07:13 PM

Disconnect cables fom doors. Move controls, better? If not, lube cables. Now move doors. Do they move easy? If not, open up heater box, blow out and lube pivot points and rubber wipers on doors. jim

01-11-2009, 12:39 PM	#1
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,005	quick heater control question I`m watching a complete unit on ebay that ends in 5 hours so I could use some help asap. My 84 heater controls are kinda stiff and hard to move left to right. My old 75 gmc was that way and the lever was actually broke off and stuff on heat. Is this a problem with the controls or is it the cables are sticking? Mine work but I`ve already broke the knob off of the fan but I can still move it and the heat/defrost lever is slightly bent and is hard to move. I guess what I need to know is am I looking at the right part to fix my problem? I`ll probably pick the unit up anyway if I can get it cheap enough but I want my controls to work like they did when these trucks were new. How do i accomplish that? __________________ Anthony

01-11-2009, 12:56 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: quick heater control question alot of the time its the cables and not the selector __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-11-2009, 01:44 PM	#3
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,005	Re: quick heater control question Thanks. Thats what I was thinking but since my levers are a little bent anyway I might just try to pick it up anyway. I`ll try to lube my cables for now. thanks. __________________ Anthony

01-11-2009, 04:17 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: quick heater control question if you have a non ac truck it may not be too hard to just unhook the cable from the one door and see if that frees it up some... on rare occasions there is a problem with the hinge on the door that causes the problem but like i said above most of the time its the cables __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-11-2009, 07:13 PM	#5
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: quick heater control question Disconnect cables fom doors. Move controls, better? If not, lube cables. Now move doors. Do they move easy? If not, open up heater box, blow out and lube pivot points and rubber wipers on doors. jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.