Revolving cup holder pics - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ol yellow 72 · 03-23-2006, 05:32 PM

i also did a radio delete flip down, used some 2 top expoxie and put a 2 inch door hinge on the back, stuck the other part into the cage that hold the radio and bam hiden radio

Putter · 03-23-2006, 05:50 PM

We needa' picture of that.

And I will have to ask my wife about my rotating member. I don't pay that much attention!!!

jay_shy · 03-23-2006, 06:05 PM

I agree with putter.

Ol yellow 72 we need some pics if you don't mind.

Jason

70c10 · 03-23-2006, 06:18 PM

Quote:

Originally Posted by aitch

If I'm not on the same page, at least I'm in the same chapter. It just takes me a while to conceptualize another mans ideas without the ability to lay my hands on the components. I've got a Windstar cup holder on the way now, so I get to play too.
What is the height of the rotating member?

aitch- I didn't mean that to sound like I was putting anybody down. Sorry if it came off that way. I was really just pointing out that Putter knew what I was saying and I knew what he was saying. Sometimes I have a hard time understanding things on here too so I know where your coming from. The rotating part is about 1" if I remember correctly.

aitch · 03-23-2006, 08:12 PM

70c10, not a problem, thanks.
What looks like a potential issue tho is the difference between the center line of the ash tray face and the center line of the cup holder in the vertical axis. There may be a way to overcome this offset, I just think it's a challenge.
Like I said, I have a Windstar unit coming and I'll see what I can do with it.
I've been looking for a cup holder and this option is a great addition to our tribal knowledge. I count on this forum for information and the exchange of ideas.

TugOwar · 06-04-2006, 09:10 AM

Mods like this just really fascinate the hell outa me.

Very cool stuff guys, what ever became of this?

chevyboy55 · 06-04-2006, 09:40 AM

Quote:

Originally Posted by TugOwar

Mods like this just really fascinate the hell outa me.

Very cool stuff guys, what ever became of this?

I gotta start reading the dates on the posts.I assumed that this was a new project. I too would like to know what ever became of it.

**Hart_Rod** · 06-04-2006, 10:42 AM

Quote:

Originally Posted by Putter

You need me to PM you an address? I have to hit the junk yard on Saturday anyway to look for a part (for my dad's truck), so I will look for the correct minivan while I am there.

Putter,

If you find an extra one at the JY, could pick it up for me? I have an idea, but need to play with it first. Let me know how much I need to send you.

R

Putter · 06-05-2006, 04:15 PM

Quote:

Originally Posted by Hart_Rod

Putter,

If you find an extra one at the JY, could pick it up for me? I have an idea, but need to play with it first. Let me know how much I need to send you.

R

Will do. I didn't see any last trip out, but I have to go again to pick up a few odd items for another member, plus an A/C compressor for my dad's caravan ($399 @ parts house...$70 at JY...with warranty)

soonrfish · 06-05-2006, 05:13 PM

wow, that photoshop picture actually looks pretty good. If its done that way, you wouldnt have to worry about filling the ashtray bumper holes.

slamedchevyman · 06-05-2006, 06:41 PM

Old air products makes a ashtray cup holder that uses your old ashtray. check it out. http://www.oldairproducts.com/shop/p...9baf65dcb2c0ee
I've also seen it on a couple of other websites.

thewishartkid · 06-05-2006, 11:16 PM

Nows thats a real cool idea! Nobody smokes anymore anyway. Im sold!!!

larry may · 01-13-2009, 11:08 PM

Anyone producing these and selling them. If so Iwould be glad to have two of them.

70c10 · 01-13-2009, 11:17 PM

Wow Larry, I forgot I started this thread almost 3 years ago

You should be able to find these in the rear side wall of any 95' or so Windstar van at your local junkyard

I never did continue with my original idea so I still have my stock ashtray

LUV2XCLR8 · 01-14-2009, 04:21 PM

WOW, It has been awhile, sad part is that Putter has
been here since then and never took my ashtray with
him when he left to modify it. Need to slap him upside
the old head w/ a very large brass cowbell I guess

lts70 · 01-14-2009, 04:54 PM

I got this one for around $50 awhile back. It is made for our trucks.

rambler · 01-14-2009, 05:52 PM

I like both ideas, I wondering if someone could photoshop the first pic while filling in the two small holes and painting it to match the dash? I think that would look pretty good...

03-23-2006, 05:32 PM	#26
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 210	Re: Revolving cup holder pics i also did a radio delete flip down, used some 2 top expoxie and put a 2 inch door hinge on the back, stuck the other part into the cage that hold the radio and bam hiden radio

03-23-2006, 05:50 PM	#27
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Revolving cup holder pics We needa' picture of that. And I will have to ask my wife about my rotating member. I don't pay that much attention!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

03-23-2006, 06:05 PM	#28
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Revolving cup holder pics I agree with putter. Ol yellow 72 we need some pics if you don't mind. Jason

03-23-2006, 08:12 PM	#30
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	Re: Revolving cup holder pics 70c10, not a problem, thanks. What looks like a potential issue tho is the difference between the center line of the ash tray face and the center line of the cup holder in the vertical axis. There may be a way to overcome this offset, I just think it's a challenge. Like I said, I have a Windstar unit coming and I'll see what I can do with it. I've been looking for a cup holder and this option is a great addition to our tribal knowledge. I count on this forum for information and the exchange of ideas. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

06-04-2006, 09:10 AM	#31
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Re: Revolving cup holder pics Mods like this just really fascinate the hell outa me. Very cool stuff guys, what ever became of this?

06-05-2006, 05:13 PM	#35
soonrfish Registered User Join Date: May 2006 Location: amarillo, tx Posts: 81	Re: Revolving cup holder pics wow, that photoshop picture actually looks pretty good. If its done that way, you wouldnt have to worry about filling the ashtray bumper holes.

06-05-2006, 06:41 PM	#36
slamedchevyman Registered User Join Date: May 2006 Location: cali Posts: 14	Re: Revolving cup holder pics Old air products makes a ashtray cup holder that uses your old ashtray. check it out. http://www.oldairproducts.com/shop/p...9baf65dcb2c0ee I've also seen it on a couple of other websites. __________________ All throttle no bottle 68chsbss

06-05-2006, 11:16 PM	#37
thewishartkid Registered User Join Date: May 2006 Location: Morrisville, Missouri Posts: 66	Re: Revolving cup holder pics Nows thats a real cool idea! Nobody smokes anymore anyway. Im sold!!! __________________ KIDs in the front seat cause accidents,Accidents in the backseat cause KIDs! If it aint short,It aint Sh#t! I like El Caminos

01-13-2009, 11:08 PM	#38
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Revolving cup holder pics Anyone producing these and selling them. If so Iwould be glad to have two of them. __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2

01-13-2009, 11:17 PM	#39
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Revolving cup holder pics Wow Larry, I forgot I started this thread almost 3 years ago You should be able to find these in the rear side wall of any 95' or so Windstar van at your local junkyard I never did continue with my original idea so I still have my stock ashtray __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

01-14-2009, 04:21 PM	#40
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Revolving cup holder pics WOW, It has been awhile, sad part is that Putter has been here since then and never took my ashtray with him when he left to modify it. Need to slap him upside the old head w/ a very large brass cowbell I guess __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-14-2009, 04:54 PM	#41
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,038	Re: Revolving cup holder pics I got this one for around $50 awhile back. It is made for our trucks. Attached Images __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

01-14-2009, 05:52 PM	#42
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: Revolving cup holder pics I like both ideas, I wondering if someone could photoshop the first pic while filling in the two small holes and painting it to match the dash? I think that would look pretty good... __________________ No matter where you are..... There you are... Buckaroo Banzi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.