FS 4 Weld Drag Lites - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Rat · 01-06-2009, 08:24 PM

well im coming to the conclusion im never going to use these wheels, so they are up for sale. im looking to get $300 for all 4, there are 2 15x8's and 2 15x10s... 5 on 5 lug pattern.... a couple of them have minor scuffs.

im located in hackettstown nj

again asking $300 for all 4.. might be willing to ship (buyer pays shipping)

feel free to ask any questions...

f.monroe · 01-06-2009, 08:35 PM

Interested . Please let me know what shipping is to a business address in Bryan, Tx 77808 . Also what is the backspacing on the fronts and rears ? .
Frank

71Rat · 01-06-2009, 09:17 PM

Frank- Ill let you know tomorrow about the backspacing, but as far as shipping goes, id do $350 for all 4 shipped to your address.... i can take more pictures tomorrow also if you would like

my67chevytruck · 01-06-2009, 10:21 PM

Nice...

deal.....

f.monroe · 01-06-2009, 10:30 PM

Quote:

Originally Posted by 71Rat

Frank- Ill let you know tomorrow about the backspacing, but as far as shipping goes, id do $350 for all 4 shipped to your address.... i can take more pictures tomorrow also if you would like

Sounds good so far . I would like to see more pics . Also the backspacing on the fronts and rears . Any pics you can take of any damage would be helpful .
Frank

71Rat · 01-07-2009, 07:45 PM

Frank- i got a chance to look at the wheels again, only one wheel has noticable damage, all the others have very minor damage if any at all. i also took a measurement of the backspacing, from the mounting surface to a straight edge laying ontop of the wheel. it measured right at 4.5inches. i hope the pictures help you and if you would like me to take others just let me know.

the first 2 pics are of the 15x10s and the second 2 are 15x8S

71Rat · 01-07-2009, 07:49 PM

here are a couple more, the first is the damage on the one 15x8 and the other is all 4 wheels. the damage actually looks worse then it is because i started to polish the wheel and the black that was coming off from polishing the wheel built up in the marks

f.monroe · 01-08-2009, 08:50 PM

Thanks for the pics and wheel specs . I am going to pass since the fronts are not going to work on my setup .
Thanks and here is a bump for you .
Frank

DavidB · 01-09-2009, 09:46 PM

Do you have center caps and lug nuts? I'd love to see a picture of these on a truck if you have one. Thanks.

David

**bowtie72** · 01-10-2009, 09:28 AM

Sent you a P.M. I also would like to see them on a truck. Did the 10" wheels fit ok on the back? I would like to have them. Do you have lug nuts and caps? Thanks

71Rat · 01-10-2009, 10:49 AM

im sorry ive been unable to get to the comp in a couple days. bowtie72 was next in line.

as for pictures i havent put them on my truck. only held them up over the studs. I do not have center caps or lug nuts for them. I dont see why the 10inches on the rear should be a problem i have a 10 inch rally on the back now with 4.75 inches of backspacing and a 29x14.5 hoosier quicktime pro tire on it and it fits no problem.

ratrod67 · 01-10-2009, 11:30 AM

Hope you don't mind me posting a pic of my 71. It has the same wheel combo you are selling.

71Rat · 01-10-2009, 04:18 PM

ratrod67 no problem at all thank you actually. as i had the intentions of putting them on my truck but bought a house and plans have changed.... thank you again for posting pics

shortchev · 01-12-2009, 05:18 PM

sent pm with shipping address for quote . Thanks Peter

71Rat · 01-12-2009, 07:03 PM

shortchev: pm sent back

hotrod 80 · 01-12-2009, 07:23 PM

put me in line also

**72 Super** · 01-13-2009, 09:33 PM

I would be interested in the rears if you wanted to split them up.

Ray

yellowGT · 01-14-2009, 01:04 AM

pm sent

71Rat · 01-14-2009, 03:27 PM

ray, im trying to sell them all together, but if all the people in line for them pass, ill think about splitting them up

yellowGT, pm sent back

shortchev · 01-14-2009, 10:41 PM

I believe I am next in Line

...I will take them for the agreed price if your buyer on friday backs out . Thanks Peter

71Rat · 01-16-2009, 09:15 PM

sold to bowtie72.... ill will ship them out tomorrow

thank you everyone for your interest

01-06-2009, 08:24 PM	#1
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	FS 4 Weld Drag Lites well im coming to the conclusion im never going to use these wheels, so they are up for sale. im looking to get $300 for all 4, there are 2 15x8's and 2 15x10s... 5 on 5 lug pattern.... a couple of them have minor scuffs. im located in hackettstown nj again asking $300 for all 4.. might be willing to ship (buyer pays shipping) feel free to ask any questions... Attached Images __________________ Modify everything, leave nothing alone!~

01-06-2009, 08:35 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: FS 4 Weld Drag Lites Interested . Please let me know what shipping is to a business address in Bryan, Tx 77808 . Also what is the backspacing on the fronts and rears ? . Frank __________________ Born and proudly residing in a Red State ! Last edited by f.monroe; 01-06-2009 at 08:37 PM.

01-06-2009, 09:17 PM	#3
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites Frank- Ill let you know tomorrow about the backspacing, but as far as shipping goes, id do $350 for all 4 shipped to your address.... i can take more pictures tomorrow also if you would like __________________ Modify everything, leave nothing alone!~

01-06-2009, 10:21 PM	#4
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: FS 4 Weld Drag Lites Nice... deal..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-07-2009, 07:45 PM	#6
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites Frank- i got a chance to look at the wheels again, only one wheel has noticable damage, all the others have very minor damage if any at all. i also took a measurement of the backspacing, from the mounting surface to a straight edge laying ontop of the wheel. it measured right at 4.5inches. i hope the pictures help you and if you would like me to take others just let me know. the first 2 pics are of the 15x10s and the second 2 are 15x8S Attached Images __________________ Modify everything, leave nothing alone!~

01-07-2009, 07:49 PM	#7
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites here are a couple more, the first is the damage on the one 15x8 and the other is all 4 wheels. the damage actually looks worse then it is because i started to polish the wheel and the black that was coming off from polishing the wheel built up in the marks Attached Images __________________ Modify everything, leave nothing alone!~

01-08-2009, 08:50 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: FS 4 Weld Drag Lites Thanks for the pics and wheel specs . I am going to pass since the fronts are not going to work on my setup . Thanks and here is a bump for you . Frank __________________ Born and proudly residing in a Red State !

01-09-2009, 09:46 PM	#9
DavidB Registered User Join Date: Jun 2007 Location: South Carolina Posts: 106	Re: FS 4 Weld Drag Lites Do you have center caps and lug nuts? I'd love to see a picture of these on a truck if you have one. Thanks. David

01-10-2009, 09:28 AM	#10
bowtie72 Registered User Join Date: Mar 2007 Location: Colorado Posts: 363	Re: FS 4 Weld Drag Lites Sent you a P.M. I also would like to see them on a truck. Did the 10" wheels fit ok on the back? I would like to have them. Do you have lug nuts and caps? Thanks __________________ 1968 SWB "Little White Truck" 1972 LWB LS 4l80 "Plain Jane!!"

01-10-2009, 10:49 AM	#11
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites im sorry ive been unable to get to the comp in a couple days. bowtie72 was next in line. as for pictures i havent put them on my truck. only held them up over the studs. I do not have center caps or lug nuts for them. I dont see why the 10inches on the rear should be a problem i have a 10 inch rally on the back now with 4.75 inches of backspacing and a 29x14.5 hoosier quicktime pro tire on it and it fits no problem. __________________ Modify everything, leave nothing alone!~

01-10-2009, 11:30 AM	#12
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Re: FS 4 Weld Drag Lites Hope you don't mind me posting a pic of my 71. It has the same wheel combo you are selling. Attached Images

01-10-2009, 04:18 PM	#13
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites ratrod67 no problem at all thank you actually. as i had the intentions of putting them on my truck but bought a house and plans have changed.... thank you again for posting pics __________________ Modify everything, leave nothing alone!~

01-12-2009, 05:18 PM	#14
shortchev Registered User Join Date: Feb 2008 Location: Paradise,NL , Canada Posts: 77	Re: FS 4 Weld Drag Lites sent pm with shipping address for quote . Thanks Peter __________________ 1970 Gmc6500 1951 chevy gasser 1986 crew cab dually 1956 Gmc extended soon to be ?

01-12-2009, 07:03 PM	#15
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites shortchev: pm sent back __________________ Modify everything, leave nothing alone!~

01-12-2009, 07:23 PM	#16
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: FS 4 Weld Drag Lites put me in line also __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583



Register or Log In To remove these advertisements.

01-13-2009, 09:33 PM	#17
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: FS 4 Weld Drag Lites I would be interested in the rears if you wanted to split them up. Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

01-14-2009, 01:04 AM	#18
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: FS 4 Weld Drag Lites pm sent __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

01-14-2009, 03:27 PM	#19
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites ray, im trying to sell them all together, but if all the people in line for them pass, ill think about splitting them up yellowGT, pm sent back __________________ Modify everything, leave nothing alone!~

01-14-2009, 10:41 PM	#20
shortchev Registered User Join Date: Feb 2008 Location: Paradise,NL , Canada Posts: 77	Re: FS 4 Weld Drag Lites I believe I am next in Line ...I will take them for the agreed price if your buyer on friday backs out . Thanks Peter __________________ 1970 Gmc6500 1951 chevy gasser 1986 crew cab dually 1956 Gmc extended soon to be ?

01-16-2009, 09:15 PM	#21
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: FS 4 Weld Drag Lites sold to bowtie72.... ill will ship them out tomorrow thank you everyone for your interest __________________ Modify everything, leave nothing alone!~

Register or Log In To remove these advertisements.