'75K10 Dana 44 parts for '72K2500 ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Billhilly · 01-02-2009, 04:24 PM

Guy down here is selling axles and hubs out of a half ton truck. Are the '75 1/2 ton axles the same as my '72 3/4 axles? They went to a bigger u joint at some stage? What about the hubs? If I could get them cheap it would be good to have some spares. He wants $60 for the hubs (no reserve auction), no price on the axles (just says he has them still). He says hub part numbers are #36519 and #36520.

**special-K** · 01-02-2009, 06:06 PM

I`m not sure.I believe the K/20 Dana 44s were the same through`75.I can`t say with the 1/2t.

OLDCHEV4X4 · 01-02-2009, 06:57 PM

The axle shafts will fit and yor right , you get the bigger u joint. I think the spindles didn't go to the big bearing till 78?? Su they will fit. The hubs , rotors and brakes woulnt fit.
It looks like the inner C was cut off the axle tube..??

Billhilly · 01-03-2009, 04:20 PM

Thanks guys, I'll let you know how I make out.

Billhilly · 01-24-2009, 06:13 PM

I think I did ok. Paid $60 for the hubs, $100 for the axles and everything else. Yeah, the 'inner C' was cut off the tube, but for $160 total, for down here, I think I made out ok. Included's a 3:73 (?) r&p. At least I get a spare set of axles.

Bill.

01-02-2009, 04:24 PM	#1
Billhilly Registered User Join Date: May 2001 Location: Wairarapa, New Zealand. Posts: 782	'75K10 Dana 44 parts for '72K2500 ?? Guy down here is selling axles and hubs out of a half ton truck. Are the '75 1/2 ton axles the same as my '72 3/4 axles? They went to a bigger u joint at some stage? What about the hubs? If I could get them cheap it would be good to have some spares. He wants $60 for the hubs (no reserve auction), no price on the axles (just says he has them still). He says hub part numbers are #36519 and #36520. Attached Images __________________ 1972 K2500 Long Box 400/350

01-02-2009, 06:06 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '75K10 Dana 44 parts for '72K2500 ?? I`m not sure.I believe the K/20 Dana 44s were the same through`75.I can`t say with the 1/2t. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-03-2009, 04:20 PM	#4
Billhilly Registered User Join Date: May 2001 Location: Wairarapa, New Zealand. Posts: 782	Re: '75K10 Dana 44 parts for '72K2500 ?? Thanks guys, I'll let you know how I make out. __________________ 1972 K2500 Long Box 400/350

01-24-2009, 06:13 PM	#5
Billhilly Registered User Join Date: May 2001 Location: Wairarapa, New Zealand. Posts: 782	Re: '75K10 Dana 44 parts for '72K2500 ?? I think I did ok. Paid $60 for the hubs, $100 for the axles and everything else. Yeah, the 'inner C' was cut off the tube, but for $160 total, for down here, I think I made out ok. Included's a 3:73 (?) r&p. At least I get a spare set of axles. Bill. __________________ 1972 K2500 Long Box 400/350

01-02-2009, 06:57 PM	#3
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: '75K10 Dana 44 parts for '72K2500 ?? The axle shafts will fit and yor right , you get the bigger u joint. I think the spindles didn't go to the big bearing till 78?? Su they will fit. The hubs , rotors and brakes woulnt fit. It looks like the inner C was cut off the axle tube..?? __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.