17 inch Boyds for sale (Texas) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 02-02-2009, 10:55 PM

I have a nearly new set of wheels and tires for sale . They are Coddington Smoothie 2's . 17x8 and 17x10 with 4.5" backspacing fron and rear . Tires are 275/60/17 Nexen rear and 255/55/17 Federal fronts . Still have nubs on the treads . I have put maybe 300 miles on them .If there is any real interest , I can get better pics if needed .I paid good money for them but should have bought 20's .

$1350

Frank

Chevy_Man · 02-02-2009, 11:53 PM

Interested in some better pics.......

Chevy_Man · 02-02-2009, 11:56 PM

Where are you located?
You can send pics here cottontop1360@hotmail.com

f.monroe · 02-03-2009, 12:21 AM

Here are a couple pics taken wen I bolted them on the fisrt time , before it was lowered . They are hard to photo since they are so shiny . Just shows up as a glare . These are better pics . I am about 1 to 1 1/2 hours northwest of Houston . Bryan-College Station , Tx basically . These pics were taken when I put them on it on October 9th, 2008. That makes them 5 months old .
Frank

hensonjd · 02-03-2009, 12:33 AM

What vehicles will these wheels fit?

f.monroe · 02-03-2009, 12:41 AM

Quote:

Originally Posted by hensonjd

What vehicles will these wheels fit?

Bolt pattern is 5 on 5' . All GM truck half tons from 71 and up . I am sure they would fit any 5 on 5" pattern vehicle that had enough clearance . The only thing i had to do is install shorter grease caps on my 1 1/4 inch rotors since this truck has the heavy duty rotors . They were about 4 dollars at the parts house .
Frank

Chevy_Man · 02-03-2009, 09:18 AM

Frank, does the back rub any with that offset....? How much do you have your truck lowered also? Can you get some more pics for me and send to cottontop1360@hotmail.com i would like to see the back some more and some pics of the tires......

Thanks

Eric

rodstored-72 · 02-03-2009, 03:22 PM

Frank,
what is the offset on the rear? do you think it would be ok on a stock 1972 rearend with 5" lowering? i am very interested, though with you i am contemplating the 20's....

thanks!!

f.monroe · 02-03-2009, 07:16 PM

The rears do not rub at all . I have the rear pretty low . If I tried to lower it more , it may rub on the outside but I am not sure . I have it lowered 5 inches in the rear . The rear backspace is 4.5 inches . These trucks (73-87) can go up to 5.5 inches of backspace without hitting the wheel tubs . I am not totally sure how much backspace a 67-72 will take . If someone knows , feel free to post . I posted them on the 67-72 because most people on the 73-87 site are into 20-22's . Here are a couple pics from the rear . I will have to get the pics of the tires up close . The last pic shows a pic of the rear tire . It was a little dirty in the pic since I had just driven back up the driveway after having the exhaust redone .
Frank

jholley · 02-03-2009, 08:14 PM

Man I wish I had a spare $1350 sitting around. Those would be bolted to my truck already.

STOCKISH · 02-03-2009, 09:37 PM

Very nice wheels. Wish I had the cash. Beautiful truck too. Bump it up for ya.

Ole Blue 68 · 02-04-2009, 10:16 AM

Bump for you.

Nice truck and some nice wheels, I'd keep them.

C20-67_N_MO · 02-04-2009, 05:11 PM

WOW!

Very nice wheels and tires.

I really like the tread pattern of those tires.

If you still have these for sale when I get more $$ I will consider buying them.

f.monroe · 02-07-2009, 07:31 PM

Wheels sold to (Eric) Chevy_Man . Met him today in Livingston, Tx . Nice guy .
Frank

Chevy_Man · 02-07-2009, 11:02 PM

Hey Frank, thanks for a nice set of wheels......and it sure was nice to another good deal with a board member....Was nice to meet you Frank...

Trey` · 02-08-2009, 12:19 AM

Frank saw you coming down the road the other day by tractor supply and thought N2Trux was in town, That is a very nice truck and looked beautiful with those wheels on it rolling.

f.monroe · 02-11-2009, 08:38 PM

Thanks for the compliment Trey . As small s Cooks Point is , it is hard to believe that there are two members of the board that live there .
Frank

whatnow123 · 02-11-2009, 08:57 PM

I have the same wheels with the same backspacing and a 285 tire on the back. The tire is close to the bed on the inside (stepside) but more than enough clearance to not rub at all. I also have the narrower 67-70 rear end.

I love my wheels, this is a great buy at this price! TTT for ya!

02-02-2009, 10:55 PM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	17 inch Boyds for sale (Texas) I have a nearly new set of wheels and tires for sale . They are Coddington Smoothie 2's . 17x8 and 17x10 with 4.5" backspacing fron and rear . Tires are 275/60/17 Nexen rear and 255/55/17 Federal fronts . Still have nubs on the treads . I have put maybe 300 miles on them .If there is any real interest , I can get better pics if needed .I paid good money for them but should have bought 20's . $1350 Frank Attached Images __________________ Born and proudly residing in a Red State !

02-02-2009, 11:53 PM	#2
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: 17 inch Boyds for sale (Texas) Interested in some better pics....... __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

02-02-2009, 11:56 PM	#3
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: 17 inch Boyds for sale (Texas) Where are you located? You can send pics here cottontop1360@hotmail.com __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

02-03-2009, 12:21 AM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 17 inch Boyds for sale (Texas) Here are a couple pics taken wen I bolted them on the fisrt time , before it was lowered . They are hard to photo since they are so shiny . Just shows up as a glare . These are better pics . I am about 1 to 1 1/2 hours northwest of Houston . Bryan-College Station , Tx basically . These pics were taken when I put them on it on October 9th, 2008. That makes them 5 months old . Frank Attached Images __________________ Born and proudly residing in a Red State !

02-03-2009, 12:33 AM	#5
hensonjd Registered User Join Date: Jul 2008 Location: Buffalo, Tx Posts: 422	Re: 17 inch Boyds for sale (Texas) What vehicles will these wheels fit?

02-03-2009, 09:18 AM	#7
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: 17 inch Boyds for sale (Texas) Frank, does the back rub any with that offset....? How much do you have your truck lowered also? Can you get some more pics for me and send to cottontop1360@hotmail.com i would like to see the back some more and some pics of the tires...... Thanks Eric __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons Last edited by Chevy_Man; 02-03-2009 at 09:31 AM.

02-03-2009, 03:22 PM	#8
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,012	Re: 17 inch Boyds for sale (Texas) Frank, what is the offset on the rear? do you think it would be ok on a stock 1972 rearend with 5" lowering? i am very interested, though with you i am contemplating the 20's.... thanks!!

02-03-2009, 07:16 PM	#9
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 17 inch Boyds for sale (Texas) The rears do not rub at all . I have the rear pretty low . If I tried to lower it more , it may rub on the outside but I am not sure . I have it lowered 5 inches in the rear . The rear backspace is 4.5 inches . These trucks (73-87) can go up to 5.5 inches of backspace without hitting the wheel tubs . I am not totally sure how much backspace a 67-72 will take . If someone knows , feel free to post . I posted them on the 67-72 because most people on the 73-87 site are into 20-22's . Here are a couple pics from the rear . I will have to get the pics of the tires up close . The last pic shows a pic of the rear tire . It was a little dirty in the pic since I had just driven back up the driveway after having the exhaust redone . Frank Attached Images __________________ Born and proudly residing in a Red State !

02-03-2009, 08:14 PM	#10
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: 17 inch Boyds for sale (Texas) Man I wish I had a spare $1350 sitting around. Those would be bolted to my truck already. __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

02-03-2009, 09:37 PM	#11
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 17 inch Boyds for sale (Texas) Very nice wheels. Wish I had the cash. Beautiful truck too. Bump it up for ya. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-04-2009, 10:16 AM	#12
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: 17 inch Boyds for sale (Texas) Bump for you. Nice truck and some nice wheels, I'd keep them.

02-04-2009, 05:11 PM	#13
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: 17 inch Boyds for sale (Texas) WOW! Very nice wheels and tires. I really like the tread pattern of those tires. If you still have these for sale when I get more $$ I will consider buying them. __________________ Coming Soon: Project 1970 Country Truck

02-07-2009, 07:31 PM	#14
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 17 inch Boyds for sale (Texas) Wheels sold to (Eric) Chevy_Man . Met him today in Livingston, Tx . Nice guy . Frank __________________ Born and proudly residing in a Red State !

02-07-2009, 11:02 PM	#15
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: 17 inch Boyds for sale (Texas) Hey Frank, thanks for a nice set of wheels......and it sure was nice to another good deal with a board member....Was nice to meet you Frank... __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

02-08-2009, 12:19 AM	#16
Trey` Active Member Join Date: Oct 2004 Location: Cooks Point,Texas Posts: 238	Re: 17 inch Boyds for sale (Texas) Frank saw you coming down the road the other day by tractor supply and thought N2Trux was in town, That is a very nice truck and looked beautiful with those wheels on it rolling. __________________ '70 Chevy stepside, ECE discs & 4/6, '00 GMC ext. cab stepside, never ending project '07 GMC Crew Cab, 24's & 5/7 "We, the unwilling, led by the unquailified, have been doing the unbelievable for so long with so little, we now attempt, the impossible with nothing"



Register or Log In To remove these advertisements.

02-11-2009, 08:38 PM	#17
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 17 inch Boyds for sale (Texas) Thanks for the compliment Trey . As small s Cooks Point is , it is hard to believe that there are two members of the board that live there . Frank __________________ Born and proudly residing in a Red State !

02-11-2009, 08:57 PM	#18
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: 17 inch Boyds for sale (Texas) I have the same wheels with the same backspacing and a 285 tire on the back. The tire is close to the bed on the inside (stepside) but more than enough clearance to not rub at all. I also have the narrower 67-70 rear end. I love my wheels, this is a great buy at this price! TTT for ya! __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094 Last edited by whatnow123; 02-11-2009 at 08:57 PM.

Register or Log In To remove these advertisements.