found this - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skullboydeath · 02-08-2009, 04:40 PM

So I ripped out all the interior today and while I was cleaning out 40 years worth of dirt I found this behind the gas tank. I think it is a radio delete plate. Am I right? My truck doesent have a radio so I snapeed it in place and it fit. Anyway I heard they are pretty hard to come by so I thought I would share my find.

Rogue · 02-08-2009, 04:47 PM

Yep, that is for a 64-66.

protrash64 · 02-08-2009, 06:11 PM

What was on the back side? I found one in my 'burb and couldnt figure out how it was supposed to mount. I ended up drilling it and using buttonheads.

Rogue · 02-08-2009, 06:21 PM

They have 2 clips on the back that snap into the 2 round holes.

protrash64 · 02-08-2009, 06:27 PM

Thats what the marks on the back were from

. Must of gotten ripped off somewhere along the line. I dont feel bad about drilling it now....thanx Rogue.

*LILRED66* · 02-10-2009, 11:06 PM

The photo shows the front side of a 4-5-6 Chevy truck radio delete. They came with two friction clips on the back that caught the outside lip of the delete plate and had two sprung fingers on each clip that insert into the factory radio knob shaft holes in the dash, that held the delete plate in place. If you have one, don't drill it...find the correct clips or affix it with body trim mastic or some other method, so you don't damage the face, that way it will hold its value.

joe231 · 02-11-2009, 12:05 AM

protrash64 · 02-11-2009, 12:38 AM

Quote:

Originally Posted by joe231

What are you laughing at Joe?

joe231 · 02-11-2009, 12:50 AM

Tony is gonna whoop yer butt fer drilling your radio delete......
get 'em Tony!
Jeff, you and your protrash

just kidding guys, don't take offense

protrash64 · 02-11-2009, 01:00 AM

Everybody else's is worth just a little more now......

**ChiefRocka** · 02-11-2009, 08:54 AM

Quote:

Originally Posted by protrash64

What are you laughing at Joe?

Quote:

Originally Posted by joe231

Tony is gonna whoop yer butt fer drilling your radio delete......
get 'em Tony!
Jeff, you and your protrash

just kidding guys, don't take offense

Quote:

Originally Posted by protrash64

Everybody else's is worth just a little more now......

skullboydeath · 02-11-2009, 05:59 PM

thanks guys for the record I have the clips. It got a nice sanding and primering. Not sure if I am going to use it or not so for now its put up.

Zaynay · 02-11-2009, 06:30 PM

Mine's still stuck on the dash by the left clip. Can't figure out how to get it off, I'd like to keep it in the event that I remove it to put in a small radio to fit the original hole.

protrash64 · 02-11-2009, 10:07 PM

Can you reach up from behind and push it out?

( I already know Im going to hear it for writing that

)

joe231 · 02-11-2009, 10:26 PM

i'm gonna leave that one alone.

protrash64 · 02-11-2009, 10:29 PM

02-08-2009, 04:40 PM	#1
skullboydeath Registered User Join Date: May 2008 Location: Johnson City, TN Posts: 45	found this So I ripped out all the interior today and while I was cleaning out 40 years worth of dirt I found this behind the gas tank. I think it is a radio delete plate. Am I right? My truck doesent have a radio so I snapeed it in place and it fit. Anyway I heard they are pretty hard to come by so I thought I would share my find.

02-08-2009, 04:47 PM	#2
Rogue Airport Bum Join Date: Jan 2005 Location: Propwash (16Xray) D/FW, Texas Posts: 320	Re: found this Yep, that is for a 64-66. __________________ 1964 Chevrolet C-10 1941 Chevrolet coupe 1962 Thunderbird 1959 Edsel Villager 1963 Skylark

02-08-2009, 06:11 PM	#3
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: found this What was on the back side? I found one in my 'burb and couldnt figure out how it was supposed to mount. I ended up drilling it and using buttonheads. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-08-2009, 06:21 PM	#4
Rogue Airport Bum Join Date: Jan 2005 Location: Propwash (16Xray) D/FW, Texas Posts: 320	Re: found this They have 2 clips on the back that snap into the 2 round holes. __________________ 1964 Chevrolet C-10 1941 Chevrolet coupe 1962 Thunderbird 1959 Edsel Villager 1963 Skylark

02-08-2009, 06:27 PM	#5
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: found this Thats what the marks on the back were from. Must of gotten ripped off somewhere along the line. I dont feel bad about drilling it now....thanx Rogue. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-10-2009, 11:06 PM	#6
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: found this The photo shows the front side of a 4-5-6 Chevy truck radio delete. They came with two friction clips on the back that caught the outside lip of the delete plate and had two sprung fingers on each clip that insert into the factory radio knob shaft holes in the dash, that held the delete plate in place. If you have one, don't drill it...find the correct clips or affix it with body trim mastic or some other method, so you don't damage the face, that way it will hold its value.

02-11-2009, 12:05 AM	#7
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: found this __________________ *CHEVY ONLY*

02-11-2009, 12:50 AM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: found this Tony is gonna whoop yer butt fer drilling your radio delete...... get 'em Tony! Jeff, you and your protrash just kidding guys, don't take offense __________________ *CHEVY ONLY* Last edited by joe231; 02-11-2009 at 12:52 AM.

02-11-2009, 01:00 AM	#10
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: found this Everybody else's is worth just a little more now...... __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-11-2009, 05:59 PM	#12
skullboydeath Registered User Join Date: May 2008 Location: Johnson City, TN Posts: 45	Re: found this thanks guys for the record I have the clips. It got a nice sanding and primering. Not sure if I am going to use it or not so for now its put up.

02-11-2009, 06:30 PM	#13
Zaynay Registered User Join Date: Dec 2008 Location: Virginia Beach, VA Posts: 5	Re: found this Mine's still stuck on the dash by the left clip. Can't figure out how to get it off, I'd like to keep it in the event that I remove it to put in a small radio to fit the original hole.

02-11-2009, 10:07 PM	#14
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: found this Can you reach up from behind and push it out? ( I already know Im going to hear it for writing that ) __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-11-2009, 10:26 PM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: found this i'm gonna leave that one alone. __________________ *CHEVY ONLY*

02-11-2009, 10:29 PM	#16
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: found this __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.