front disc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texanidiot25 · 02-17-2009, 06:15 PM

Goto a junk yard and get 73-87 spindles/calipers. If you go with any conversion rotors you gonna need them for the heavy half tons IIRC. Get 73-87 ball joints, and bolt them into the 67-72 a-arms. You can grab the center drag link, and tie rods from the doner 73-87, but I just went ahead and used CPP conversion tie rod sleeve and used 73-87 outters. Use 73-87 brake lines. Takes a bit of work modding one of the brackets that hold the line, but I can get pics.

That's where I'm sitting at, with 300 into it. New disk brake prop valve booster and mastercylinder are on the way.

http://67-72chevytrucks.com/vboard/s...d.php?t=317654 < my experience

02-17-2009, 06:15 PM	#13
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: front disc Goto a junk yard and get 73-87 spindles/calipers. If you go with any conversion rotors you gonna need them for the heavy half tons IIRC. Get 73-87 ball joints, and bolt them into the 67-72 a-arms. You can grab the center drag link, and tie rods from the doner 73-87, but I just went ahead and used CPP conversion tie rod sleeve and used 73-87 outters. Use 73-87 brake lines. Takes a bit of work modding one of the brackets that hold the line, but I can get pics. That's where I'm sitting at, with 300 into it. New disk brake prop valve booster and mastercylinder are on the way. http://67-72chevytrucks.com/vboard/s...d.php?t=317654 < my experience Last edited by texanidiot25; 02-17-2009 at 06:16 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.