interior dye

[jrsmith_2010]

hey guys, i am wanting to paint the inside of my truck dark blue. i tryed spray paint, but it keep chipping and peeling. ive heard some good things about dyeing the doorpanels and such. so where is the place to buy some? how much? how hard is it to do?

thanks
jrsmith

[jdurant]

I have often had the same question. I would like to see what others use as well. But, I have used Sems plastic/vinyl paint to good affect. I have wondered about that ColorBond stuff that LMC sells. It is a spray on dye according to the ad. They make some pretty bold claims about it. Haven't had the chance to try it though.

[N2TRUX]

You might find this interesting-LINK

[78 Chevyrado]

I like SEM Brand. You can buy it at eastwood. Make sure to get the vinyl/plastic prep. I used around 3.5 to 4 cans of dye to about 1 can of prep.

Here's some of my results with SEM.

[Traction]

First, let me say that I have used SEM and ColorBond. The KEY thing is to get the surface clean and properly prepped.

I have recently started using a cheaper alternative. For the plastic parts on mine I used Krylon Fusion semi gloss black. It is a paint for plastic and doesn't need any primer or adhesion promoter. I still cleaned everything with dish soap and a scotch brite pad. I painted my interior pieces for my current truck and for a daily driver I had a few years ago. On the daily driver I used Fusion brushed nickel color. It lasted great and looked factory.

What I love about this stuff is that it retains the factory texture, it is quick and easy, and it is available everywhere...I buy mine at ace hardware.

For the vinyl and carpet parts I used the duplicolor vinyl and fabric dye in a can. It came out great too, but I haven't installed yet so I cannot speak for its' durability.

When I install everything I wil post up some pics.

[Richard D]

I used LMC Truck's dye, came out great.
http://www.lmctruck.com/ICATALOG/CC/full.aspx?Page=109
Check out the thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=306974

[jlmerie]

I have used the Colorbond product for a couple of consoles that I have done. I agree that, as usual, the prep work is key to a good finish. I really liked the dye aspect of this. I think it looks noticeably better than paint. It looks the same as it came from the factory. My two cents.

[6772fan]

Another vote for SEM brand. It's a bit pricey but worth it. As already stated several times, preparation is the key.........

[jdurant]

I'm still confused though. I've always thought that by definition a dye changed the color of something by saturating/soaking in or actually changing the color of it rather than covering. A dye is closer to a stain, than a paint. Seems like you shouldn't be able to peel off a dye.
I just looked at a SEM can that I have which was recommended by the automotive paint supply. It's called Sem's color coat for plastic, vinyl, velour, and carpet. It says it isn't a dye. I've never actually seen anything that said dye on the can. Are yall using something different?

[jrsmith_2010]

Originally Posted by jdurant

i'm still confused though. I've always thought that by definition a dye changed the color of something by saturating/soaking in or actually changing the color of it rather than covering. A dye is closer to a stain, than a paint. Seems like you shouldn't be able to peel off a dye.
I just looked at a sem can that i have which was recommended by the automotive paint supply. It's called sem's color coat for plastic, vinyl, velour, and carpet. It says it isn't a dye. I've never actually seen anything that said dye on the can. Are yall using something different?

x2

[78 Chevyrado]

Originally Posted by jdurant

I'm still confused though. I've always thought that by definition a dye changed the color of something by saturating/soaking in or actually changing the color of it rather than covering. A dye is closer to a stain, than a paint. Seems like you shouldn't be able to peel off a dye.
I just looked at a SEM can that I have which was recommended by the automotive paint supply. It's called Sem's color coat for plastic, vinyl, velour, and carpet. It says it isn't a dye. I've never actually seen anything that said dye on the can. Are yall using something different?

No I used the stuff you're talking about. The SEM I used says its a flexible coating and not a dye. I just call it dye from habit, I call it dye if it's for vinyl of fabrics, etc..

[jdurant]

So, is that it? When everyone says they are using dye, they are really just using flexible paint. I was really hoping this thread would be more informative than that.

[bigblock73]

SEM is a paint, but everyone seems to call it a dye. It will be dang near impossible to dye large interior pieces unless you have a tub or bin to fill with boiling water and RIT and let the pieces soak. Dying (is that spelled right) can actually be harmful to plastics due to what they have to go thru to change colors. Read a bottle of RIT and see what it has to say.

I don't think anything that sprays on can be considered a dye or work like one.

[BLE 'BURBAN]

I used krylons adhesion promotor before I painted my interior.

[Richard D]

Try it, I think you'll like it.

[blk81shrt]

Lets say my dash pad has a crack (which it does) and I fixed it with bondo/fiberglass and then I used the dye on it? Would it mess up the finish? My panels still have the paint from the factory- they are looking a little messed up!!!

[N2TRUX]

Originally Posted by blk81shrt

Lets say my dash pad has a crack (which it does) and I fixed it with bondo/fiberglass and then I used the dye on it?

Yes! The vinyl dye( or plastic paint) being discussed WILL NOT cover repairs. The repairs will not allow you to duplicate the factory grain so there will be a smooth spot.

I don't know why it referred to as "dying" your interior rather than painting, but it has been that way as long as I remember. Yes it says paint on the can, but ask an interior expert to "paint" your interior and see how he looks at you.

[blk81shrt]

I just looked at the SEM site, there is a vinyl repair compound, I think I will get my hands on that, and then use the 'dye' to paint it afterward. Here is the link to the repair compounds:

http://semproducts.com/Catalog.asp?prod=194

any thoughts?

[N2TRUX]

Originally Posted by blk81shrt

I just looked at the SEM site, there is a vinyl repair compound....any thoughts?

Yes, my thoughts are it will show. Please read my response, especially the part about "The repairs will not allow you to duplicate the factory grain so there will be a smooth spot.
"...

[blk81shrt]

Ya, I agree with you N2TRUX, thats what I figured, but after reading through the site, I think I will give it a shot. The instructions read:

"...Once complete, the repair may be topcoated. Use COLOR COAT or SURE-COAT for vinyl repairs or SURE-COAT for leather repairs."

Although it doesnt say anything about the quality of the results, hopefully I can fix my dash or only a couple bills!

Now I will just have to find somewhere that carries this stuff!!

[andrewmp6]

The key is to clean the parts good and use a wax and grease remover after a good washing if not it won't stick for long.

[chevyrestoguy]

Clean, clean, and then clean the part again with Ting (light grit cleaner you can buy it at almost any auto body supply stores) and a mild Scotchbrite and a bristle brush. Wipe the part with wax and grease remover and let dry. Light coats of SEM. Never go too heavy on any coats or it will bury the grain and make the part look smooth and shiny. A little paint (dye) goes a long way. SEM products may appear expensive, but they are worth every penny.

[maxreps]

Originally Posted by chevyrestoguy

clean, clean, and then clean the part again with ting (light grit cleaner you can buy it at almost any auto body supply stores) and a mild scotchbrite and a bristle brush. Wipe the part with wax and grease remover and let dry. Light coats of sem. Never go too heavy on any coats or it will bury the grain and make the part look smooth and shiny. A little paint (dye) goes a long way. Sem products may appear expensive, but they are worth every penny.

+1 !!

[rodstored-72]

i have used the SEM products on my interior to "paint" it close to the color that i am going for when i actually "redo" my interior. i had never used it before. After using it i will say that it worked to my satisfaction, i feel i am pretty picky too (lol). i think the key is like stated above..... preparation. i also remember that it is a "paint" therefore i try not to do to much "bumping & grinding" when working on the interior....

good luck!!

[78 Big10 454]

My vote is for SEM. I applied it to my interior almost 20 years ago. Looks as good as the day it rolled off the showroom floor.