blazer top measurements? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 02-22-2009, 12:42 PM

I did a quick search and came up empty handed...
Does anyone have the total length of a top? From the cowl to the tip of the gate?
Also, I think I remember seeing someone making a jig to hang one from the rafters? Anyone have a link?
Last one.... how about weight of a single wall top?

mudman316 · 02-22-2009, 03:12 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=304065

here is one.

hotrodhomi · 02-22-2009, 04:24 PM

Quote:

Originally Posted by Longhorn Man

I did a quick search and came up empty handed...
Does anyone have the total length of a top? From the cowl to the tip of the gate?
Also, I think I remember seeing someone making a jig to hang one from the rafters? Anyone have a link?
Last one.... how about weight of a single wall top?

Do you want the length of the top or from the cowl to the gate. the cowl to the gate measurement will be a longer because the windshield is raked back a bit. I can get this info for you when I get off work.

LUV2XCLR8 · 02-22-2009, 05:25 PM

I got 105" from front edge to rear points (+ or - an inch)

cparman · 02-22-2009, 06:10 PM

do a search for BOBBYK. he was kind enough to send me some pics of what he made to lift his top. I forwarded it to a friend who is supposed to be building one for his double wall top
http://public.fotki.com/blazbk/blazer_mods/ hope this works ????

Longhorn Man · 02-22-2009, 10:47 PM

mud man, that was exactly what I had in mind... thanks!
hotrodhomi... you got me man... I ment the top of the windshield.
Craig.... perfect... Looks like I have a room that may be specificly used for nothing more than housing a blazer roof.
cparman... thanks for the link... there was some other stuff on that link that I needed to locate.

Only one left.... aprox how much does a single top weigh? Just a ball park number

OldCreek · 02-23-2009, 02:05 PM

----andy's next sweet ass rig goes here.... SOON!!!----

Must be a Blazer!!!

**Yukon Jack** · 02-23-2009, 03:39 PM

You're joining the K5 ranks? Sweet!!!!

LUV2XCLR8 · 02-23-2009, 04:25 PM

I'm going to guess with Hatch, Glass, and all about 250lbs?

2 people can remove one, it's more awkward than heavy.

Huck · 02-23-2009, 09:30 PM

Andy, actually both the single and double wall tops are--double thick and weigh about the same---around 250-300lbs. They are a ***** to install or remove even with two strong guys. I suspended mine from the floor joists in the roof of my garage---on 4 light chains going through 2 2/6 boards--drill a hole through each end and pin the chain to support the top. One board goes about 24" from the rear and the other goes above the door windows as far back as you can get it. That is a good balance. Do not store it on it's leading or trailing edges--you will get breakage. Call me if you need additional info---Huck

Longhorn Man · 02-23-2009, 11:35 PM

nope... no K/5 for me...
Warren... I may have to look over your set up sometime. I DO like what I see in the link above though...
I actually DO still have your cell number believe it or not. I'll have to look at the map, but i may be blowing right by your area next month.

Critter · 02-23-2009, 11:49 PM

Quote:

Originally Posted by Longhorn Man

Craig.... perfect... Looks like I have a room that may be specificly used for nothing more than housing a blazer roof.

Quote:

Originally Posted by Longhorn Man

nope... no K/5 for me...

Well, I'm officially confused as to what the H3LL you are up to then!

Longhorn Man · 02-24-2009, 12:20 AM

lol!

OldCreek · 02-24-2009, 12:28 AM

Ha! He's probably getting a Jimmy!

Or, he's gonna get a Blazer and install 1ton axles and call it a "K7.5" or something like that.

Or, he's gonna make a removeable top for the burb...

Critter · 02-24-2009, 12:39 AM

Quote:

Originally Posted by OldCreek

Ha! He's probably getting a Jimmy!

Or, he's gonna get a Blazer and install 1ton axles and call it a "K7.5" or something like that.

Or, he's gonna make a removeable top for the burb...

Or maybe he is just gonna buck the system and call it a C5...even though they weren't called that.

Or maybe he found a nice single wall and he's gonna invest in it because it would be a better move than a savings account at the moment.

Or maybe...

Longhorn Man · 02-24-2009, 07:27 AM

technicly, a 2 wheel drive blazer IS a C/5... if you go by that system you refered to... then all the ppl calling there 4X4 trucks K/10 or K/20 are wrong. They may have never been badged as a C/5... but they are CE/CS designated trucks on the VIN and model number.
So are the blazer guys wrong for not going by the C/K designations... or are the truck guys wrong? (I'm sure I can find GM documentation somewhere on all this too....

)

cparman · 02-24-2009, 08:33 AM

On the side of my Blazer, there are CST 10 badges. People ask " what is that ?" Chip's Sport Truck. there its official now

Critter · 02-24-2009, 01:00 PM

Quote:

Originally Posted by Longhorn Man

They may have never been badged as a C/5...

That's all I meant.

LUV2XCLR8 · 02-24-2009, 03:51 PM

Quote:

Originally Posted by Critter

Well, I'm officially confused as to what the H3LL you are up to then!

I quit trying to figure Andy out 15 minutes after signing up on this Board in 2004

Longhorn Man · 02-24-2009, 04:43 PM

LOL craig!!!

02-22-2009, 12:42 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	blazer top measurements? I did a quick search and came up empty handed... Does anyone have the total length of a top? From the cowl to the tip of the gate? Also, I think I remember seeing someone making a jig to hang one from the rafters? Anyone have a link? Last one.... how about weight of a single wall top?

02-22-2009, 03:12 PM	#2
mudman316 Registered User Join Date: Jan 2009 Location: chattanooga, tn. Posts: 104	Re: blazer top measurements? http://67-72chevytrucks.com/vboard/s...d.php?t=304065 here is one. __________________ BE NICE IT PAYS IN THE END.

02-22-2009, 05:25 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: blazer top measurements? I got 105" from front edge to rear points (+ or - an inch) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-22-2009, 06:10 PM	#5
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: blazer top measurements? do a search for BOBBYK. he was kind enough to send me some pics of what he made to lift his top. I forwarded it to a friend who is supposed to be building one for his double wall top http://public.fotki.com/blazbk/blazer_mods/ hope this works ???? Last edited by cparman; 02-22-2009 at 06:12 PM.

02-22-2009, 10:47 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: blazer top measurements? mud man, that was exactly what I had in mind... thanks! hotrodhomi... you got me man... I ment the top of the windshield. Craig.... perfect... Looks like I have a room that may be specificly used for nothing more than housing a blazer roof. cparman... thanks for the link... there was some other stuff on that link that I needed to locate. Only one left.... aprox how much does a single top weigh? Just a ball park number

02-23-2009, 02:05 PM	#7
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: blazer top measurements? ----andy's next sweet ass rig goes here.... SOON!!!---- Must be a Blazer!!! __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

02-23-2009, 03:39 PM	#8
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: blazer top measurements? You're joining the K5 ranks? Sweet!!!! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-23-2009, 04:25 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: blazer top measurements? I'm going to guess with Hatch, Glass, and all about 250lbs? 2 people can remove one, it's more awkward than heavy. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-23-2009, 09:30 PM	#10
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: blazer top measurements? Andy, actually both the single and double wall tops are--double thick and weigh about the same---around 250-300lbs. They are a ***** to install or remove even with two strong guys. I suspended mine from the floor joists in the roof of my garage---on 4 light chains going through 2 2/6 boards--drill a hole through each end and pin the chain to support the top. One board goes about 24" from the rear and the other goes above the door windows as far back as you can get it. That is a good balance. Do not store it on it's leading or trailing edges--you will get breakage. Call me if you need additional info---Huck

02-23-2009, 11:35 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: blazer top measurements? nope... no K/5 for me... Warren... I may have to look over your set up sometime. I DO like what I see in the link above though... I actually DO still have your cell number believe it or not. I'll have to look at the map, but i may be blowing right by your area next month.

02-24-2009, 12:20 AM	#13
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: blazer top measurements? lol!

02-24-2009, 12:28 AM	#14
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: blazer top measurements? Ha! He's probably getting a Jimmy! Or, he's gonna get a Blazer and install 1ton axles and call it a "K7.5" or something like that. Or, he's gonna make a removeable top for the burb... __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

02-24-2009, 07:27 AM	#16
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: blazer top measurements? technicly, a 2 wheel drive blazer IS a C/5... if you go by that system you refered to... then all the ppl calling there 4X4 trucks K/10 or K/20 are wrong. They may have never been badged as a C/5... but they are CE/CS designated trucks on the VIN and model number. So are the blazer guys wrong for not going by the C/K designations... or are the truck guys wrong? (I'm sure I can find GM documentation somewhere on all this too.... )

02-24-2009, 08:33 AM	#17
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: blazer top measurements? On the side of my Blazer, there are CST 10 badges. People ask " what is that ?" Chip's Sport Truck. there its official now

02-24-2009, 04:43 PM	#20
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: blazer top measurements? LOL craig!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.