adjustable panhard bar? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 03-15-2009, 02:13 AM

haha no problem. cant wait to finish making my newish panhard bar and install it

Andy4639 · 03-15-2009, 02:16 AM

Make sure you post pictures of it so I can see what all my hard work went to!

jbristo67 · 03-15-2009, 02:27 AM

Quote:

Originally Posted by Andy4639

Here is mine installed.

I thought it was supposed to hook up on the bottom of the trailing arm

*project 67 sub* · 03-15-2009, 02:44 AM

thats what i thought to. but mines going to mount to some tabs welded to my lowering block, so that i can remove the blocks all together if i deside to 4-link it or something

Andy4639 · 03-15-2009, 03:11 AM

You want the bar as horizontal to the rear end as you can get it. This gives you the most travel before pulling to the drivers side.

*project 67 sub* · 03-15-2009, 03:55 AM

lol. ok. i'll post pics if i can find a way to. only camera i have is on my phone, and i have no service(damn). but im still going to take pics with it so when i do finaly get service im going to have some pics to post.

Quote:

Originally Posted by Andy4639

Make sure you post pictures of it so I can see what all my hard work went to!

jbristo67 · 03-15-2009, 05:49 AM

I think I am going to go this route with mine. I think where it mounts will make it work a lot better with my blocks. My only concern is that it bends to go around the diff and I hope it wont get in the way of my fuel tank. How much clearance would you have there with a Blazer tank? Sorry to jack your thread.

Andy4639 · 03-15-2009, 12:12 PM

That just don't look right to me for some reaon. I'm not saying it want work but it looks like it would not travel right with that bend in it. I have never seen a bar with the bend in it. Huh!

jbristo67 · 03-15-2009, 01:15 PM

You never know. I may be pulling it off in a few months and it may be for sale on the parts board lol

03-15-2009, 02:13 AM	#26
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: adjustable panhard bar? haha no problem. cant wait to finish making my newish panhard bar and install it Last edited by project 67 sub; 03-15-2009 at 02:14 AM.

03-15-2009, 02:16 AM	#27
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: adjustable panhard bar? Make sure you post pictures of it so I can see what all my hard work went to! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-15-2009, 02:44 AM	#29
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: adjustable panhard bar? thats what i thought to. but mines going to mount to some tabs welded to my lowering block, so that i can remove the blocks all together if i deside to 4-link it or something

03-15-2009, 03:11 AM	#30
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: adjustable panhard bar? You want the bar as horizontal to the rear end as you can get it. This gives you the most travel before pulling to the drivers side. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-15-2009, 05:49 AM	#32
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: adjustable panhard bar? I think I am going to go this route with mine. I think where it mounts will make it work a lot better with my blocks. My only concern is that it bends to go around the diff and I hope it wont get in the way of my fuel tank. How much clearance would you have there with a Blazer tank? Sorry to jack your thread. Attached Images __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada Last edited by jbristo67; 03-15-2009 at 05:53 AM.

03-15-2009, 12:12 PM	#33
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: adjustable panhard bar? That just don't look right to me for some reaon. I'm not saying it want work but it looks like it would not travel right with that bend in it. I have never seen a bar with the bend in it. Huh! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-15-2009, 01:15 PM	#34
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: adjustable panhard bar? You never know. I may be pulling it off in a few months and it may be for sale on the parts board lol __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.