5 lug 12 bolt coil rear end in Central Ca - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PipsC10 · 07-12-2008, 02:04 PM

Took this out of my truck last year and replaced with a posi ear end. It was in excellent shape when removed, no problems at all. It is from a 1970, measures 58" to the mounting plates. I think the gears are somewhere around .280? It ran about 2500 rpm at 65 mph. Asking $250, $150 to anyone who can pick it up.

SOLD

**clay68c10** · 07-13-2008, 02:22 AM

I run about the same RPM with 3.07 gears, maybe what you have.
ttt

PipsC10 · 07-13-2008, 10:01 AM

Quote:

Originally Posted by clay68c10

I run about the same RPM with 3.07 gears, maybe what you have.
ttt

I dont have a tach so that was a guess, but its somewhere around there. I did the old spin the axle 1 revolution and count the yoke and it was somewhere around 2.8 turns.

huero · 07-14-2008, 01:56 AM

How did a 70 come with 5 on 5 lug pttern? Are those aftermarket axles or did you re-drill them?

PipsC10 · 07-14-2008, 11:11 AM

Quote:

Originally Posted by huero

How did a 70 come with 5 on 5 lug pttern? Are those aftermarket axles or did you re-drill them?

they were replaced by the PO with 5 lug axles.

sighlurr · 02-23-2009, 02:17 AM

Is this still available?

sighlurr · 02-24-2009, 03:29 PM

PM sent.

I'm interested....

sighlurr · 02-24-2009, 05:41 PM

I need to pass - it's too wide.

sighlurr · 03-21-2009, 12:30 PM

What does this measure from the mounting surfaces?

07-12-2008, 02:04 PM	#1
PipsC10 Registered User Join Date: Jan 2008 Location: Oakdale, Ca Posts: 655	5 lug 12 bolt coil rear end in Central Ca Took this out of my truck last year and replaced with a posi ear end. It was in excellent shape when removed, no problems at all. It is from a 1970, measures 58" to the mounting plates. I think the gears are somewhere around .280? It ran about 2500 rpm at 65 mph. Asking $250, $150 to anyone who can pick it up. SOLD __________________ 1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4 Last edited by PipsC10; 03-23-2009 at 03:18 PM. Reason: sold

07-13-2008, 02:22 AM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Re: 5 lug 12 bolt coil rear end in Central Ca I run about the same RPM with 3.07 gears, maybe what you have. ttt __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-14-2008, 01:56 AM	#4
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: 5 lug 12 bolt coil rear end in Central Ca How did a 70 come with 5 on 5 lug pttern? Are those aftermarket axles or did you re-drill them?

02-23-2009, 02:17 AM	#6
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 5 lug 12 bolt coil rear end in Central Ca Is this still available?

02-24-2009, 03:29 PM	#7
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 5 lug 12 bolt coil rear end in Central Ca PM sent. I'm interested....

02-24-2009, 05:41 PM	#8
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 5 lug 12 bolt coil rear end in Central Ca I need to pass - it's too wide.

03-21-2009, 12:30 PM	#9
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 5 lug 12 bolt coil rear end in Central Ca What does this measure from the mounting surfaces?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.