The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-24-2009, 01:29 PM   #1
Garagedude
Registered User
 
Garagedude's Avatar
 
Join Date: Aug 2008
Location: Summerville SC
Posts: 217
Greg Weld Wheels are a Joke

Well as most of you have seen in some of my pics I had posted I had bought Greg Weld rims for the front of the truck and was waiting for them to come out of back order, and come back in stock so I could order the back rims. Well I finally got the back rims yesterday they were 15x12 with a 6 inch backspace and they were a sweet set of rims, so I go to put them on the truck and I can't get them to clear the caliper, I am running a wilwood disk brake setup, and the wheel wouldn't clear it by and 1inch and a half, so now I am getting extremely fustrated now, and call greg weld the one line is disconected and the other line is constantanly busy. So I call Jims Racing Tires where I bough them from and he gives me the number to the guy thats in charge, and start playing phone tag with him, he tells me that the 15x12 or the 15x14 are not designed to work with wilwood or other racing brake companies and they designed the rim wrong, He said they should have a new wheel to work with these brakes in 3 months, he told me I could have my brakes cut down, but I am not going to cut a brand new kit thats stupid. I waited 6 months for these rims to come back instock and they don't fit cause everyone told me they would fit I have ran weld racing rims and centerlines before and they clear the brakes fine. So after all the BS I am sending the back rims back and buying weld racing rims, and I guese I will have to sell the fronts, I am sorry to say this but Greg Weld is a Joke there customer service stinks, and if nobody noticed summit racing dropped them as a vendor. I will never buy from them again.
Garagedude is offline   Reply With Quote
Old 03-24-2009, 01:55 PM   #2
kwhite4
Junior Member
 
kwhite4's Avatar
 
Join Date: Oct 2004
Location: Gatesville texas
Posts: 180
Re: Greg Weld Wheels are a Joke

According to Google Greg Weld died last Aug, maybe this could have something to do with your issue?
Eitherway hope you get it all resolved.

Keith
__________________
68 GMC
565 BBC
Abruzzi super pro glide
9.85@135.00
kwhite4 is offline   Reply With Quote
Old 03-24-2009, 02:02 PM   #3
Garagedude
Registered User
 
Garagedude's Avatar
 
Join Date: Aug 2008
Location: Summerville SC
Posts: 217
Re: Greg Weld Wheels are a Joke

Yes he did die and the company is actually is on the brink of going out of business but three people are trying to keep it alive and get the new wheels into production. After it was all said and done I didn't really loose to much money on it I am just upset that I waited 6 months for these rims and they didn't fit when everyone said they would. But I ended up just ordering a set of weld racing rims today. I guess I will just run the front set for a while until someone buys them.
Garagedude is offline   Reply With Quote
Old 03-24-2009, 02:22 PM   #4
drag_72
Ready to go fast!!
 
drag_72's Avatar
 
Join Date: Aug 2008
Location: Carthage,Mo
Posts: 219
Re: Greg Weld Wheels are a Joke

get us some pics goin when you get them in!! lol
__________________
454 block .30 forged aluminum pistons
steel crank
valve job
Holley Strip Dominator intake
1030cfm holley carb, 250 plate shot
roller rockers Erson Solid cam split duration 307/310.
.575/.595 lift
milodon oil pan
fab. aluminum valve covers
4 bolt main splayed anodized caps
all studded
drag_72 is offline   Reply With Quote
Old 03-24-2009, 02:24 PM   #5
swb85
On a budget like Fred Sanford
 
swb85's Avatar
 
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
Re: Greg Weld Wheels are a Joke

Greg Weld Racing no longer exists. They had a liquidation auction a few weeks ago and sold all remaining assets including all remaining wheel inventory, office furniture/equip etc. Bummer to hear about your situation, I'm kinda in the same boat. I've got GW racelites for the front of my camaro and was waiting for the right size rears to come out. Now that they'll never be, I'm just gonna run pro-stars on the rear. They actually match pretty well and look just fine to me.
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread
'98 Camaro z28: 370ci twin turbo 370ci build
'01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD

Last edited by swb85; 03-24-2009 at 02:25 PM.
swb85 is offline   Reply With Quote
Old 03-24-2009, 02:41 PM   #6
Garagedude
Registered User
 
Garagedude's Avatar
 
Join Date: Aug 2008
Location: Summerville SC
Posts: 217
Re: Greg Weld Wheels are a Joke

I hope the Greg weld stars on the front of truck and the weld racing stars on the back look alright together for now cause I am on a tight budget to get this truck done right now. If you Google Jims racing Tires he has about 160 sets of Greg welds in stock as far as if they will fit what your camaro I couldn't tell you that Mike Ravish the guy in charge of Greg Weld right now said the 15x12 or 15x14 won't fit a rotor and caliper bigger the 12.5 inches.
Garagedude is offline   Reply With Quote
Old 03-27-2009, 08:13 AM   #7
Garagedude
Registered User
 
Garagedude's Avatar
 
Join Date: Aug 2008
Location: Summerville SC
Posts: 217
Re: Greg Weld Wheels are a Joke

New 15x12 weld racing stars, should have bought from them in the first place.
Attached Images
 
Garagedude is offline   Reply With Quote
Old 03-27-2009, 11:34 AM   #8
drag_72
Ready to go fast!!
 
drag_72's Avatar
 
Join Date: Aug 2008
Location: Carthage,Mo
Posts: 219
Re: Greg Weld Wheels are a Joke

got em on yet???
__________________
454 block .30 forged aluminum pistons
steel crank
valve job
Holley Strip Dominator intake
1030cfm holley carb, 250 plate shot
roller rockers Erson Solid cam split duration 307/310.
.575/.595 lift
milodon oil pan
fab. aluminum valve covers
4 bolt main splayed anodized caps
all studded
drag_72 is offline   Reply With Quote
Old 03-27-2009, 12:33 PM   #9
Garagedude
Registered User
 
Garagedude's Avatar
 
Join Date: Aug 2008
Location: Summerville SC
Posts: 217
Re: Greg Weld Wheels are a Joke

Not yet I have to buy a set of tires
Garagedude is offline   Reply With Quote
Old 03-27-2009, 12:47 PM   #10
drag_72
Ready to go fast!!
 
drag_72's Avatar
 
Join Date: Aug 2008
Location: Carthage,Mo
Posts: 219
Re: Greg Weld Wheels are a Joke

ahhh damn that sucks lol
__________________
454 block .30 forged aluminum pistons
steel crank
valve job
Holley Strip Dominator intake
1030cfm holley carb, 250 plate shot
roller rockers Erson Solid cam split duration 307/310.
.575/.595 lift
milodon oil pan
fab. aluminum valve covers
4 bolt main splayed anodized caps
all studded
drag_72 is offline   Reply With Quote
Old 03-27-2009, 10:41 PM   #11
Garagedude
Registered User
 
Garagedude's Avatar
 
Join Date: Aug 2008
Location: Summerville SC
Posts: 217
Re: Greg Weld Wheels are a Joke

Tires should be coming soon I am going with a 29x15.5 should look pretty good I had 18.5 on the truck but they weren't tucked these will be tucked
Garagedude is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com