Need Printed Tach Circuit!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971short4X4 · 03-16-2003, 01:14 PM

Hi, I have a good used one that has one minor problem. The last 1/8 inch (or less) of the two connectors for the temp guage are missing. This is easily fixed by soldering on a jumper wire for each of the the two temp wires. (ie someone got a little ambitious and pulled the printed circuit off without disconnecting the temp guage. You can have this one for 10.00 (inc shipping) just let me know if you are interested.

Thanks

Tom

03-16-2003, 01:14 PM	#2
1971short4X4 Registered User Join Date: Nov 2001 Location: Mission Viejo, Ca Posts: 377	Hi, I have a good used one that has one minor problem. The last 1/8 inch (or less) of the two connectors for the temp guage are missing. This is easily fixed by soldering on a jumper wire for each of the the two temp wires. (ie someone got a little ambitious and pulled the printed circuit off without disconnecting the temp guage. You can have this one for 10.00 (inc shipping) just let me know if you are interested. Thanks Tom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.