Need pic of mid 60's model on bags to help with brain storming

[jmedero]

I have a lwb 66 and am getting stuff together to bag it. I am looking for a picture of a mid 60's model with bag kit and drop spindle up front and bags on the trailing arms, with a small notch for the rear end. I am trying to see if this will be enough of a drop or if I should do a z or member and stepping it in the rear. I will have 20's or 22's on it. Any pic's would be great.

Thanks

ps added an old pic of the truck bc post are no good without a pic right!!

[N2TRUX]

If you really want to see what it will look like lowered I suggest posting a request in the photoshop forum.

Try searching first to see if it has already been done. If not, then post a "quality" side view of the truck you want and your choice of wheels.

[protrash64]

Ive posted these a few times .......I'm close to what you describe....no notch in the rear. Front is bags/spindles and rear is bags only. The tires are 29'' in diameter, sitting on the inner fender in the front. It would sit on the ground or close if the inner fenders were removed.

[jmedero]

I thought that was photoshoped last time I saw that pic. Just wanted to see a couple trucks with that simple set up to make sure that was low enough before I start cutting up.

[protrash64]

No photoshop on these pics....there was one that Frizzle did that looks like the top pic.....thats what got me going on bagging this thing. The rear would sit at least 3'' lower with a notch. Good luck.