speaker wire between door and cab -

[dan42]

Is there a "proper" way to run the wire from the door to the cab so that it doesn't pinch? If anyone has pictures, if you could post them, that would be great -
Thanks

[dammitmitchell]

im not gods gift to this but my two cent idea has been
make sure you have a dang good clean hole so no burring ever cuts or nicks your wires..
and if you feel like hiding the wire find the flexible wire covers from a junk yard and steal them off an import from there..
(they are usually smaller from what ive done =-))
but try basically to keep the wire off of any moving or pivoting parts and try not to use to much excess..
and good luck

[dammitmitchell]

and i am sorry about the terrible typing, be patient.. i probably have a good excuse =-)

[flamingbig10]

yes, but I have no idea what its called

[AceX]

I'm just using wire loom, but there is a right and wrong way to do it when using the loom. If you use the boot like the post above, its hard to screw up.

I'll post a pic later of my own wires.

[hotrodhomi]

Originally Posted by flamingbig10

yes, but I have no idea what its called

That is what I used on my '80. you can find that part on any squarebody with power windows or locks.

[Sinister]

Here's how I ran mine, I ended up hitting the wires with some rattlecan flatblack.
Running the wire like this supposedly keeps them from moving around too much.

[Riveted1]

Or you could go the expensive route....

Door Wiring Looms