71-72 front rotor hub dimensions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 04-22-2009, 08:16 PM

Anyone got a caliper handy and a wheel off their 71+ disc brake setup? I'm looking for the dimensions for the snout (including dust cap) to ensure a wheel with a center bore of 3.07" and hub depth of 2.75" will fit.

FRENCHBLUE72 · 04-23-2009, 09:05 AM

Hey ken if i caers I LL GET THE MEASUREMENT FOR YA..

FRENCHBLUE72 · 04-25-2009, 03:15 AM

Ken it looks like my dog ate my calipers or someone walked off with them..

XXL · 04-25-2009, 04:00 AM

Quote:

Originally Posted by FRENCHBLUE72

Ken it looks like my dog ate my calipers or someone walked off with them..

No problem on my end. But if your dog ate them, you're going to have problems in a few hours *gulp*

gringoloco · 04-25-2009, 10:48 AM

I have 3.06 and 1.75. You should be good. In return, I would like to know what kind of wheels you're gonna use.

**lolife99** · 04-25-2009, 11:00 AM

XXL,... I measured my blazer rotors. The hub diameter was about 3.030" and the depth was 2.875".
They are ECE cross-drilled 5 lug rotors and with new ECE dust caps.
I also measured the bore of a 5 lug ralley. I came up with 3.035".
Hope this helps.

gringoloco · 04-25-2009, 11:05 AM

Doh! Go with lolife's numbers. I just realized my loose rotors are 1" thick, so the bore would be the same but the snout is shorter- and I didn't include the dust cap...

**lolife99** · 04-25-2009, 11:35 AM

My rotor are 1-1/4" thick, if that makes a difference.

XXL · 04-25-2009, 01:19 PM

Sounds like a worst case of the dreaded cap doesn't fit syndrome. Or best case, they work fine. I'll let you know on the wheel type once I get them... I need a head start on the crowd

gringoloco · 04-25-2009, 03:02 PM

Cap no-fit is easily curable with an angle grinder- with no ill effects to the rotors...

XXL · 04-25-2009, 03:06 PM

Current wheels have been capless for 10 years (next month), so as you can see, I am flexible on this point

04-22-2009, 08:16 PM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	71-72 front rotor hub dimensions Anyone got a caliper handy and a wheel off their 71+ disc brake setup? I'm looking for the dimensions for the snout (including dust cap) to ensure a wheel with a center bore of 3.07" and hub depth of 2.75" will fit. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

04-23-2009, 09:05 AM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 71-72 front rotor hub dimensions Hey ken if i caers I LL GET THE MEASUREMENT FOR YA.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-25-2009, 03:15 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 71-72 front rotor hub dimensions Ken it looks like my dog ate my calipers or someone walked off with them.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-25-2009, 10:48 AM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 71-72 front rotor hub dimensions I have 3.06 and 1.75. You should be good. In return, I would like to know what kind of wheels you're gonna use. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-25-2009 at 10:51 AM.

04-25-2009, 11:00 AM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 71-72 front rotor hub dimensions XXL,... I measured my blazer rotors. The hub diameter was about 3.030" and the depth was 2.875". They are ECE cross-drilled 5 lug rotors and with new ECE dust caps. I also measured the bore of a 5 lug ralley. I came up with 3.035". Hope this helps. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 04-25-2009 at 11:04 AM.

04-25-2009, 11:05 AM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 71-72 front rotor hub dimensions Doh! Go with lolife's numbers. I just realized my loose rotors are 1" thick, so the bore would be the same but the snout is shorter- and I didn't include the dust cap... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-25-2009, 11:35 AM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 71-72 front rotor hub dimensions My rotor are 1-1/4" thick, if that makes a difference. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-25-2009, 01:19 PM	#9
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: 71-72 front rotor hub dimensions Sounds like a worst case of the dreaded cap doesn't fit syndrome. Or best case, they work fine. I'll let you know on the wheel type once I get them... I need a head start on the crowd __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

04-25-2009, 03:02 PM	#10
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 71-72 front rotor hub dimensions Cap no-fit is easily curable with an angle grinder- with no ill effects to the rotors... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-25-2009, 03:06 PM	#11
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: 71-72 front rotor hub dimensions Current wheels have been capless for 10 years (next month), so as you can see, I am flexible on this point __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.