Need help with converting instr panel w/out gauges

[kingnothin_36]

Originally Posted by chuckmc8

Kingnothin: You need one donor pin from another harness. I am doing this same thing now and figured that out also. I had a junk underdash harness that I just salvaged an extra pin from the dash plug. I can send you one if youd like, but you may find one closer-LMK
I am assuming that you are using GMC pauls how to on this (Rearrange wires from a idiot light harness to an instrument dash harness)- The link is on the FAQ page on this forum. If you need help, post here and I can assist
HTH< Chuck

I currently don't have a donor that I would be able to pull from. If you could send me one that would be awesome. I will pm you with some info. I just found that link from GMC pauls, it looks pretty easy now if I only have to move a few wire around. Thanks for you help. Cory