68 GMC cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

otsenre · 04-21-2009, 10:28 PM

minimal rust. Floors are solid, little surface rust at kick panels, AC, new windshield, rear slider, doors included. Left rocker does have rust, but I will install new rocker panel before it leaves. 600 Name: IMG_0902.jpg
Views: 755
Size: 58.3 KB

Name: IMG_0902.jpg
Views: 755
Size: 58.3 KB

Name: IMG_0903.jpg
Views: 780
Size: 51.6 KB

Name: IMG_0904.jpg
Views: 755
Size: 54.6 KB

Name: IMG_0905.jpg
Views: 739
Size: 57.8 KB

Name: IMG_0906.jpg
Views: 746
Size: 48.7 KB

otsenre · 04-21-2009, 10:30 PM

more more

Quote:

Originally Posted by otsenre

minimal rust. Floors are solid, little surface rust at kick panels, AC, new windshield, rear slider, doors included. Left rocker does have rust, but I will install new rocker panel before it leaves. 600 Attachment 455287

Attachment 455288

Attachment 455289

Attachment 455290

Attachment 455291

otsenre · 04-21-2009, 10:32 PM

Quote:

Originally Posted by otsenre

more more

Name: IMG_0910.jpg
Views: 620
Size: 43.2 KB

Name: IMG_0911.jpg
Views: 620
Size: 54.5 KB

otsenre · 04-21-2009, 10:35 PM

If this does not sell, I will install this cab on a 68 short stepper and try to sell that way, any interest?

wild wille · 04-22-2009, 09:57 AM

how much $ as is?

otsenre · 04-22-2009, 12:01 PM

Quote:

Originally Posted by wild wille

how much $ as is?

as is, everyjthing on it 600

ProStreet83C10 · 04-22-2009, 02:16 PM

similar questions as bed

what percent of rust excluding surface and when you install new rocker?
did this come off 1/2 ton or 3/4 ton frame?
2WD or 4WD truck cab?

otsenre · 04-22-2009, 02:41 PM

Quote:

Originally Posted by ProStreet83C10

similar questions as bed

what percent of rust excluding surface and when you install new rocker?
did this come off 1/2 ton or 3/4 ton frame?
2WD or 4WD truck cab?

After I install rocker, remaing rust will be very minimal See pics on thread I have for 67-72 parts) surface only. came on a 68GMC 2wd. Doors have a little rust at bottoms., but are uncut with chrome wing windows, has a rear slider, new winsdhield, AC

danw210 · 04-25-2009, 03:25 PM

How much if you installed the new rocker?

otsenre · 04-26-2009, 04:20 PM

Quote:

Originally Posted by otsenre

If this does not sell, I will install this cab on a 68 short stepper and try to sell that way, any interest?

Here are pics of the 68 stepper I will install this cab and front clip on Name: IMG_0930.jpg
Views: 566
Size: 60.3 KB

Name: IMG_0931.jpg
Views: 569
Size: 64.3 KB

Name: IMG_0932.jpg
Views: 572
Size: 57.9 KB

Name: IMG_0933.jpg
Views: 568
Size: 66.5 KB

Name: IMG_0934.jpg
Views: 559
Size: 77.9 KB

otsenre · 04-26-2009, 04:21 PM

Quote:

Originally Posted by otsenre

Here are pics of the 68 stepper I will install this cab and front clip on Attachment 456487

Attachment 456488

Attachment 456489

Attachment 456490

Attachment 456491

more

Name: IMG_0935.jpg
Views: 451
Size: 59.4 KB

Name: IMG_0936.jpg
Views: 457
Size: 56.3 KB

Name: IMG_0937.jpg
Views: 448
Size: 62.0 KB

ACP427 · 04-27-2009, 03:24 AM

I'd, Like to get that to syracuse NY save me some work of fixing mine. T

otsenre · 05-09-2009, 09:34 PM

Quote:

Originally Posted by ACP427

I'd, Like to get that to syracuse NY save me some work of fixing mine. T

Here are some pics of 68 stripped, ready to sandblast, install 5 lug 72 axles, install nice cab and front clip, all we need is a nice bed. Anybody? Name: IMG_0968.jpg
Views: 348
Size: 51.1 KB

Name: IMG_0968.jpg
Views: 348
Size: 51.1 KB

Name: IMG_0969.jpg
Views: 346
Size: 56.5 KB

Name: IMG_0971.jpg
Views: 345
Size: 58.2 KB

Name: IMG_0972.jpg
Views: 344
Size: 71.5 KB

Name: IMG_0973.jpg
Views: 347
Size: 59.5 KB

Dasani · 05-13-2009, 08:31 PM

Do you have the front clip off this truck too?

otsenre · 05-13-2009, 11:38 PM

Found nice bed, pickup now will be complete. Its a 68 short stepper, AC cab, nice front clip and bed, good running 350/350

ewoody625 · 05-15-2009, 10:42 AM

I am very interested in your cab. its $600 for cab and doors w/the repaired rocker?
eric

ewoody625 · 05-15-2009, 10:45 AM

i have one more question.. will this work on a 71? i know the fenders and front ends are different but im not sure bout the cab and doors. if this fits i am 99% sure i'll take it if you have no one else on it.
thanks
Eric

ewoody625 · 05-15-2009, 05:31 PM

Do you have pictures of the doors?

otsenre · 05-15-2009, 06:20 PM

Quote:

Originally Posted by ewoody625

i have one more question.. will this work on a 71? i know the fenders and front ends are different but im not sure bout the cab and doors. if this fits i am 99% sure i'll take it if you have no one else on it.
thanks
Eric

Eric, I am installing this cab on a 68 short stepper, will do so as soon as I clean frame. Sorry,
How do I delete this add

otsenre · 05-15-2009, 06:23 PM

Quote:

Originally Posted by Dasani

Do you have the front clip off this truck too?

Sure do! The fenders are off the gmc, I will use the chevy 68 grill

ewoody625 · 05-15-2009, 08:05 PM

ok thanks anyway...i dont know how to delete ads sorry

04-21-2009, 10:28 PM	#1
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	68 GMC cab minimal rust. Floors are solid, little surface rust at kick panels, AC, new windshield, rear slider, doors included. Left rocker does have rust, but I will install new rocker panel before it leaves. 600

04-21-2009, 10:35 PM	#4
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 68 GMC cab If this does not sell, I will install this cab on a 68 short stepper and try to sell that way, any interest?

04-22-2009, 09:57 AM	#5
wild wille Registered User Join Date: Sep 2008 Location: Megargel Texas Posts: 149	Re: 68 GMC cab how much $ as is?

04-22-2009, 02:16 PM	#7
ProStreet83C10 Drag Racer Join Date: Nov 2006 Location: Mason City, Iowa Posts: 1,276	Re: 68 GMC cab similar questions as bed what percent of rust excluding surface and when you install new rocker? did this come off 1/2 ton or 3/4 ton frame? 2WD or 4WD truck cab? __________________ Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 Last edited by ProStreet83C10; 04-22-2009 at 02:16 PM.

04-25-2009, 03:25 PM	#9
danw210 69 K20 Join Date: Mar 2009 Location: Elizabethtown, KY Posts: 426	Re: 68 GMC cab How much if you installed the new rocker?

04-27-2009, 03:24 AM	#12
ACP427 Registered User Join Date: Jan 2003 Location: North Syracuse, NY Posts: 160	Re: 68 GMC cab I'd, Like to get that to syracuse NY save me some work of fixing mine. T

05-13-2009, 08:31 PM	#14
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: 68 GMC cab Do you have the front clip off this truck too?

05-13-2009, 11:38 PM	#15
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 68 GMC cab Found nice bed, pickup now will be complete. Its a 68 short stepper, AC cab, nice front clip and bed, good running 350/350

05-15-2009, 10:42 AM	#16
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: 68 GMC cab I am very interested in your cab. its $600 for cab and doors w/the repaired rocker? eric

05-15-2009, 10:45 AM	#17
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: 68 GMC cab i have one more question.. will this work on a 71? i know the fenders and front ends are different but im not sure bout the cab and doors. if this fits i am 99% sure i'll take it if you have no one else on it. thanks Eric

05-15-2009, 05:31 PM	#18
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: 68 GMC cab Do you have pictures of the doors?

05-15-2009, 08:05 PM	#21
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: 68 GMC cab ok thanks anyway...i dont know how to delete ads sorry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.