The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-18-2009, 03:42 AM   #1
souza777
Registered User
 
souza777's Avatar
 
Join Date: Apr 2009
Location: merced, ca
Posts: 42
Firing order

WHATS THE FIRING ORDER ON A 1976 350 W/2BBL?
souza777 is offline   Reply With Quote
Old 05-18-2009, 04:48 AM   #2
James McClure
One shot, one kill.
 
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
Re: Firing order

All Chevy V8 fireing orders are the same. 1-8-4-3-6-5-7-2. Hope that helps, jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.
James McClure is offline   Reply With Quote
Old 05-18-2009, 05:09 PM   #3
souza777
Registered User
 
souza777's Avatar
 
Join Date: Apr 2009
Location: merced, ca
Posts: 42
Re: Firing order

i didnt see any marking on the dist. cap for the #1 spot thought i had did it right now truck wont start. do you know which post on cap is #1???
souza777 is offline   Reply With Quote
Old 05-18-2009, 06:52 PM   #4
LONGHAIR
just can't cover up my redneck
 
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
Re: Firing order

Pull the sparkplug out of the #1 cylinder. Hold you finger over the hole while you have someone "bump" the engine over slowly. (or you can turn it by hand from the crank bolt) When you feel the pressure pushing against your finger stop. Then turn the engine by hand until the timing mark lines up on the balancer. Be sure the key is turned off, then take the cap off of the distributor. Your rotor is now pointed toward the #1 terminal. Start your plug wires from there...as James McClure said 18436572
__________________
You can review the site's rules here.



Quote:
Originally Posted by Longhorn Man View Post
As for reading directions...
The directions are nothing but another man's opinion.
Learn from the mistakes of others, you won't live long enough to make them all yourself...

Bad planning on your part does not necessarily constitute an instant emergency on my part....

The great thing about being a pessimist is that you are either pleasantly surprised or right.
LONGHAIR is offline   Reply With Quote
Old 05-19-2009, 01:47 AM   #5
BLE 'BURBAN
In the Forgotten far North.
 
BLE 'BURBAN's Avatar
 
Join Date: Jul 2007
Location: Anchorage, Alaska
Posts: 2,627
Re: Firing order

I agree with Longhair on this.
Also more times than not you will find that the rotor will be pointing at the #1 cylinder (Drivers side front) on the engine

Your Cylinders are located 1-3-5-7 on the drivers side front to rear and 2-4-6-8 front to rear on the passengers side.
__________________
1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015
1990 chevy suburban V2500 5.7L
My cluster Mods-Nov 2007
overhead console Stereo install Round 2 Aug 2009
Heated/turn signal mirror upgrade
BLE 'BURBAN is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com