WTB or Trade-V6 4X4 Parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

john@thepier · 09-21-2008, 01:27 PM

Here is the 1967 V-6 4x4 engine cross member I have available. John

BobS · 09-21-2008, 02:20 PM

Sorry, I haven't been on here in a couple of days, trying to get some work done outside while the weather is still nice!

1969stepside,

Have you seen Jolly's 60-66 GMC site?
http://www.6066gmcguy.org/
Lots of information there and there are quite a few guys on this board that have V-6s as well.

special-K,

The towers and crossmembers are different, at least from what I've seen. Are your's from a 2WD?

Kager,

Where are you at in Nort' Dakota? You should have left the truck in DL, it's only about 20 miles away! I'd like to see pics when you can get them.

John,

PM sent.

Thanks guys!

Bob

Kager67 · 09-21-2008, 05:32 PM

Here are the pics. I live in Cooperstown, its about 90 miles NW of Fargo.

**special-K** · 09-21-2008, 10:18 PM

Bob,I don`t actually know.I just know they are V6.If we had a picture from a 4wd I could compare.

WyoRoadDog · 09-22-2008, 10:31 PM

Here's a pic of the crossmember/mounts on mine. Hope it helps. If you need another LMK.

BobS · 09-26-2008, 08:50 AM

Tim,

Are you talking about one of these two pieces? Kinda hard to see the whole thing where it bolts to the block, this one's got a little grease on it! The frame mount is for a 2WD.

Bob

BobS · 09-26-2008, 09:10 AM

WyoRoadDog,

Do you have a pic of your bellhousing? The parts book only shows one bellhousing that is used in both 2 and 4WD applications.

Bob

WyoRoadDog · 09-26-2008, 01:39 PM

Hey Bob-
I don't have any with it on the engine, but here are some of just it. Hope this helps.

BobS · 09-26-2008, 01:51 PM

That's exactly what I was looking for. Yours is the same as the ones I have from 2WD trucks. Thanks!

Bob

BobS · 05-24-2009, 08:47 AM

Bringing this one to the top again, I'm still looking for another 4X4 V-6 engine crossmember from a 67-69 GMC.

Bob

glimmertwin01 · 05-24-2009, 09:36 AM

thats a pretty wild concept... 305 V6 K2500... I like the durablity of the I6 292... but thats very cool.i have seen a few of those BBV6'sin a bone yard... didnt pay mind to see if they were 4 by's
good luck man
Oh and to the guy in Dixie..that old truck of yours is Bad ass.. you should get it back and spank it!

09-21-2008, 01:27 PM	#26
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB or Trade-V6 4X4 Parts Here is the 1967 V-6 4x4 engine cross member I have available. John Attached Images

09-21-2008, 02:20 PM	#27
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Sorry, I haven't been on here in a couple of days, trying to get some work done outside while the weather is still nice! 1969stepside, Have you seen Jolly's 60-66 GMC site? http://www.6066gmcguy.org/ Lots of information there and there are quite a few guys on this board that have V-6s as well. special-K, The towers and crossmembers are different, at least from what I've seen. Are your's from a 2WD? Kager, Where are you at in Nort' Dakota? You should have left the truck in DL, it's only about 20 miles away! I'd like to see pics when you can get them. John, PM sent. Thanks guys! Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel Last edited by BobS; 09-21-2008 at 02:21 PM.

09-21-2008, 05:32 PM	#28
Kager67 what knocking sound? Join Date: Feb 2005 Location: good ol North Dakota Posts: 148	Re: WTB or Trade-V6 4X4 Parts Here are the pics. I live in Cooperstown, its about 90 miles NW of Fargo. Attached Images __________________ 1968 C-10 1953 belair two-door post 1955 chevy 3600 big window 1950 studebaker starlite coupe 1968 Impala SS Last edited by Kager67; 09-21-2008 at 05:33 PM.

09-21-2008, 10:18 PM	#29
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB or Trade-V6 4X4 Parts Bob,I don`t actually know.I just know they are V6.If we had a picture from a 4wd I could compare. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-22-2008, 10:31 PM	#30
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: WTB or Trade-V6 4X4 Parts Here's a pic of the crossmember/mounts on mine. Hope it helps. If you need another LMK. Attached Images __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.

09-26-2008, 08:50 AM	#31
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Tim, Are you talking about one of these two pieces? Kinda hard to see the whole thing where it bolts to the block, this one's got a little grease on it! The frame mount is for a 2WD. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

09-26-2008, 09:10 AM	#32
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts WyoRoadDog, Do you have a pic of your bellhousing? The parts book only shows one bellhousing that is used in both 2 and 4WD applications. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

09-26-2008, 01:39 PM	#33
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: WTB or Trade-V6 4X4 Parts Hey Bob- I don't have any with it on the engine, but here are some of just it. Hope this helps. Attached Images __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.

09-26-2008, 01:51 PM	#34
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts That's exactly what I was looking for. Yours is the same as the ones I have from 2WD trucks. Thanks! Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

05-24-2009, 08:47 AM	#35
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Bringing this one to the top again, I'm still looking for another 4X4 V-6 engine crossmember from a 67-69 GMC. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

05-24-2009, 09:36 AM	#36
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: WTB or Trade-V6 4X4 Parts thats a pretty wild concept... 305 V6 K2500... I like the durablity of the I6 292... but thats very cool.i have seen a few of those BBV6'sin a bone yard... didnt pay mind to see if they were 4 by's good luck man Oh and to the guy in Dixie..that old truck of yours is Bad ass.. you should get it back and spank it! __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.