sending unit sock/filter? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

menace121978 · 06-27-2009, 08:37 PM

hey, where can i get just the sock for the in tank sending unit?? napas trying to sell me the entire unit for $100+. mine work and look like new besides the sock part. anyone have an idea of what i should do or part # for one? thank you, Dennis

menace121978 · 06-27-2009, 11:41 PM

i knew this was going to be a tough one. i even thought about putting inline filters before the tank selector valve. but i'm not sure that would do any good since the tube is at the bottom of the tank...

anyone?

**old Rusty C10** · 06-28-2009, 10:33 AM

i dont believe you can buy just the sock its a unit sold as one

OrangeAnimal · 06-28-2009, 11:12 AM

Menace I think Old Rusty is right. Although you might try and get something that works by removing the old one and going to the local parts store. I know they sell them for later models separately.

menace121978 · 06-28-2009, 01:23 PM

right on thank you guys. look what i found this morning... http://www.carpartsdiscount.com/auto...3994&3671=1002

OrangeAnimal · 06-28-2009, 02:23 PM

Cool deal! I hadn't ever seen them for sale separate like that. I coulda used that before I threw away my stock gas tank. I run a fuel cell now. It's kinda funny though to have this race car fuel cell in my truck that you could push it down the track faster than it would run through the quarter. I need to put my truck on a diet it's such a fat ass. LOL.

menace121978 · 06-28-2009, 04:30 PM

i know the feeling... thats why i have set a goal of at least 300hp. wish i could just borrow some from the goat!

OrangeAnimal · 06-28-2009, 05:33 PM

I have what is supposed to be 300hp. It's not enough. You need to raise the bar alittle more. I am running.

350 30 over with flattops 64cc stock heads 1.94intake 1.50exhaust valves. I have a Performer EPS intake manifold a Performer Carb. Set of no name stainless headers 1 and 5/8 primaries 3 inch collector shorty style 2 and half inch pipe past that with flows 40 series, It has what told me is a RV cam. I think it's Crap!! I have a electric fan and 3 inch tall air filter K&N. I have one wheel peel and it's hard to get that one wheel spinning sometimes. Although its a huge one wheel LOL. 275/45/20. I also only have 3.23 gear in the back.

06-27-2009, 08:37 PM	#1
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	sending unit sock/filter? hey, where can i get just the sock for the in tank sending unit?? napas trying to sell me the entire unit for $100+. mine work and look like new besides the sock part. anyone have an idea of what i should do or part # for one? thank you, Dennis __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

06-27-2009, 11:41 PM	#2
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: sending unit sock/filter? i knew this was going to be a tough one. i even thought about putting inline filters before the tank selector valve. but i'm not sure that would do any good since the tube is at the bottom of the tank... anyone? __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

06-28-2009, 10:33 AM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: sending unit sock/filter? i dont believe you can buy just the sock its a unit sold as one __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-28-2009, 11:12 AM	#4
OrangeAnimal Registered User Join Date: Jan 2009 Location: New Orleans, LA Posts: 702	Re: sending unit sock/filter? Menace I think Old Rusty is right. Although you might try and get something that works by removing the old one and going to the local parts store. I know they sell them for later models separately. __________________ 82 Chevy SWB "OrangeAnimal" Lot of Goodies! Sold 93 GMC 1500 "Angry Red" 383 TBI Powered Fun! 300hp/410ft.lbs. 09 Yaris wife's daily.

06-28-2009, 01:23 PM	#5
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: sending unit sock/filter? right on thank you guys. look what i found this morning... http://www.carpartsdiscount.com/auto...3994&3671=1002 __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

06-28-2009, 02:23 PM	#6
OrangeAnimal Registered User Join Date: Jan 2009 Location: New Orleans, LA Posts: 702	Re: sending unit sock/filter? Cool deal! I hadn't ever seen them for sale separate like that. I coulda used that before I threw away my stock gas tank. I run a fuel cell now. It's kinda funny though to have this race car fuel cell in my truck that you could push it down the track faster than it would run through the quarter. I need to put my truck on a diet it's such a fat ass. LOL. __________________ 82 Chevy SWB "OrangeAnimal" Lot of Goodies! Sold 93 GMC 1500 "Angry Red" 383 TBI Powered Fun! 300hp/410ft.lbs. 09 Yaris wife's daily.

06-28-2009, 04:30 PM	#7
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: sending unit sock/filter? i know the feeling... thats why i have set a goal of at least 300hp. wish i could just borrow some from the goat! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

06-28-2009, 05:33 PM	#8
OrangeAnimal Registered User Join Date: Jan 2009 Location: New Orleans, LA Posts: 702	Re: sending unit sock/filter? I have what is supposed to be 300hp. It's not enough. You need to raise the bar alittle more. I am running. 350 30 over with flattops 64cc stock heads 1.94intake 1.50exhaust valves. I have a Performer EPS intake manifold a Performer Carb. Set of no name stainless headers 1 and 5/8 primaries 3 inch collector shorty style 2 and half inch pipe past that with flows 40 series, It has what told me is a RV cam. I think it's Crap!! I have a electric fan and 3 inch tall air filter K&N. I have one wheel peel and it's hard to get that one wheel spinning sometimes. Although its a huge one wheel LOL. 275/45/20. I also only have 3.23 gear in the back. __________________ 82 Chevy SWB "OrangeAnimal" Lot of Goodies! Sold 93 GMC 1500 "Angry Red" 383 TBI Powered Fun! 300hp/410ft.lbs. 09 Yaris wife's daily.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.