cup holders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

madaca · 07-03-2009, 08:54 AM

Any ideas for cup holders? I remember seeing a truck that had some chrome ones mounted in the middle but dont recall where I saw it. It was a real simple design. I would love to see what some of you all have done for cup holders.

protrash64 · 07-03-2009, 11:18 AM

I remember seeing a set-up for the 67-72's that slid out of the dash. I think it was billet. Anyway, it was a flat plate with 1 or 2 holes and it and it pulled out and you could drop a cup in it. When you were done, it slid back in out of the way.

I have considered using some old headlite bezels for cup holders. They would work good for the 64oz quik mart cups

.

Alan's Classic · 07-03-2009, 12:04 PM

This one has one mounted under the radio. It's hard to see. It's a nice piece.

protrash64 · 07-03-2009, 01:04 PM

Thats the one I was thinking of Alan. I think it would be fairly easy to make a low budget copy.

70 Suburban · 07-03-2009, 01:19 PM

its uses the ash tray hole. you just slide it in. ebay has them

1Bad62Pro/Street · 07-03-2009, 01:36 PM

This might help for ideas:
http://67-72chevytrucks.com/vboard/s...d.php?t=305738

Mordachai · 07-03-2009, 02:14 PM

I'm pretty sure early classic makes a 2 cup holder that goes where the ashtray was. iirc it uese the front of your ashtray bolted to their cup holder assembly

hAetWagon · 07-03-2009, 03:12 PM

I've always been partial to this one..

daverod · 07-03-2009, 05:11 PM

Quote:

Originally Posted by Mordachai

I'm pretty sure early classic makes a 2 cup holder that goes where the ashtray was. iirc it uese the front of your ashtray bolted to their cup holder assembly

I looked could'nt find it. Looked on Ebay too nothin but plastic. I would like to find a metal one.I really want one bad. I have a big flat spot on my dash that I need to fill. My xbox is only going to fill the top 1/2.

jonzcustomshop · 07-03-2009, 09:02 PM

I think they're blower pulleys..

rookierodbuilder · 07-03-2009, 10:00 PM

I always liked these that were put into an HRM project c-10.

Strodder · 07-03-2009, 10:19 PM

These work good if you can find a good place for them.
http://cgi.ebay.com/ebaymotors/Cup-H...ayphotohosting

collins10672 · 07-04-2009, 12:41 AM

how about factory cupholders?for like when youre at the drive in and parked eating.just open youre glove box,they are the round circles on the inside section of the glove box lid.lol

Wrecker55 · 07-04-2009, 12:57 AM

Quote:

Originally Posted by jonzcustomshop

I think they're blower pulleys..

Bingo jon

07-03-2009, 08:54 AM	#1
madaca Registered User Join Date: Oct 2008 Location: Longview, tx Posts: 145	cup holders Any ideas for cup holders? I remember seeing a truck that had some chrome ones mounted in the middle but dont recall where I saw it. It was a real simple design. I would love to see what some of you all have done for cup holders. __________________ Grandpas truck, my dream. This is my truck. There are many trucks like it but this one is mine. 65 Chevy C10 Fleetside

07-03-2009, 11:18 AM	#2
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: cup holders I remember seeing a set-up for the 67-72's that slid out of the dash. I think it was billet. Anyway, it was a flat plate with 1 or 2 holes and it and it pulled out and you could drop a cup in it. When you were done, it slid back in out of the way. I have considered using some old headlite bezels for cup holders. They would work good for the 64oz quik mart cups. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-03-2009, 12:04 PM	#3
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: cup holders This one has one mounted under the radio. It's hard to see. It's a nice piece. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-03-2009, 01:04 PM	#4
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: cup holders Thats the one I was thinking of Alan. I think it would be fairly easy to make a low budget copy. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-03-2009, 01:19 PM	#5
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: cup holders its uses the ash tray hole. you just slide it in. ebay has them __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

07-03-2009, 01:36 PM	#6
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: cup holders This might help for ideas: http://67-72chevytrucks.com/vboard/s...d.php?t=305738 __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

07-03-2009, 02:14 PM	#7
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: cup holders I'm pretty sure early classic makes a 2 cup holder that goes where the ashtray was. iirc it uese the front of your ashtray bolted to their cup holder assembly __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

07-03-2009, 03:12 PM	#8
hAetWagon Schlongbed MEMBER (heh)#15 Join Date: Jun 2005 Location: Sacramento Posts: 232	Re: cup holders I've always been partial to this one.. Attached Images __________________ 82 Chevy Blazer 4wd.RIP 1965 Chevy C10,350V8 Get it reliable,then puttin' it in the weeds.. "Old truck, all new headaches."

07-03-2009, 09:02 PM	#10
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: cup holders I think they're blower pulleys.. Attached Images

07-03-2009, 10:00 PM	#11
rookierodbuilder Registered User Join Date: Jan 2009 Location: Sharpsburg, Ky. Posts: 110	Re: cup holders I always liked these that were put into an HRM project c-10. Last edited by rookierodbuilder; 07-03-2009 at 10:01 PM.

07-03-2009, 10:19 PM	#12
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: cup holders These work good if you can find a good place for them. http://cgi.ebay.com/ebaymotors/Cup-H...ayphotohosting __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-04-2009, 12:41 AM	#13
collins10672 Registered User Join Date: Jan 2009 Location: bean station tennessee Posts: 398	Re: cup holders how about factory cupholders?for like when youre at the drive in and parked eating.just open youre glove box,they are the round circles on the inside section of the glove box lid.lol



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.