Lower Ball joints

[big_al_71]

Originally Posted by mclairmo

I believe that using the 73 and later ball joints allowed the use of the later style spindle and discs. It would seem to me that if you just want new ball joints, stick with the original type joints. I bought mine from the Truck Shop in Orange, CA.

Thanks I did!!1

Originally Posted by daves69

I just bought new ones and the part number for 72 or 73 was the same. They had the two grades to choose from but I couldn't see any difference. One was made in China I guess.

I bought and intalled the original style....from Advance Auto Parts

Originally Posted by chevy_mike

You will want to get the correct ball joint for the type spindles you have. If you got '73-87 spindles, use those year ball joints. If you got spindles that were for '63-'70, then you will need those years. As for '71-'72 the lowers are the same as the '73+ but the uppers are those years only.

I used Moog parts on my current '68 but have used TRW in the past. NAPA has their own line (higher end line) that look really nice I might try them on a future build.

Thanks guys for taking the time to advice me....I went ahead and bought all four and already installed in the truck...