67 LWB - Pull-a-part - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

atp · 07-31-2009, 05:57 PM

Quote:

Originally Posted by 1967C20

atp, is this truck 1/2 ton or 3/4 ton?

1/2 ton

atp · 08-01-2009, 10:47 AM

Update - Steering wheels is still available - $50 OBO plus the trip.

CSGAS · 08-01-2009, 03:04 PM

Update: I was just, just, ju-u-us-st about to leave today to come down for the radiator when my dad called and said he is sending me one as a gift.

Kind of hard for me to beat free, but that means I'll be begging off this one.

(I am ducking in case anyone wants to throw things at me!

)

**kev2809** · 08-01-2009, 08:58 PM

ignition lock ring and retainer still available?

jay-dawg · 08-01-2009, 10:21 PM

Hi,

I need the wheel cylinder push rods for the rear drum brakes (see pic #19) and the nuts holding the cylinder to the backing plate. Even 1 nut is fine so I can get a good idea what I need.

thanks!

atp · 08-03-2009, 07:25 AM

Quote:

Originally Posted by jay-dawg

Hi,

I need the wheel cylinder push rods for the rear drum brakes (see pic #19) and the nuts holding the cylinder to the backing plate. Even 1 nut is fine so I can get a good idea what I need.

thanks!

I am keeping the rearend and will be pulling it apart soon. I will grab these for you when I do.

**michael bustamante** · 08-03-2009, 11:02 AM

Not sure if I asked already but does this have or do you still have the vent glass in chrome?

jay-dawg · 08-03-2009, 12:40 PM

Quote:

Originally Posted by atp

I am keeping the rearend and will be pulling it apart soon. I will grab these for you when I do.

Ok. I appreciate it.

Thanks,
Jay

atp · 08-03-2009, 05:45 PM

Quote:

Originally Posted by michael bustamante

Not sure if I asked already but does this have or do you still have the vent glass in chrome?

They are chrome but that are in bad shape.

mup123 · 08-14-2009, 09:30 PM

I am interested in the radiator support.Is it in good condition and if so what is the price?

bowtiedude · 08-14-2009, 10:42 PM

Do you still have the engine mounts, frame brackets, aka engine stands?

cosmicphish2001 · 08-15-2009, 12:14 PM

i am interested in the heater core box..is it up for sale and if so how much??

atp · 08-15-2009, 12:18 PM

Quote:

Originally Posted by bowtiedude

Do you still have the engine mounts, frame brackets, aka engine stands?

Yes I have them

bowtiedude · 08-16-2009, 10:27 AM

PM sent

bbowser · 08-16-2009, 10:46 AM

You're keeping the rearend, how are the trailing arms?

smith2481 · 08-16-2009, 11:06 AM

Hey I am needing the rod for the inside door lock that comes up through the door for the passenger side door. It is the the knob screws on to think ya got one thanks

BigBlockBurris · 08-16-2009, 01:35 PM

Adam,

Sent you an e-mail!

BBB

atp · 08-16-2009, 05:35 PM

Quote:

Originally Posted by smith2481

Hey I am needing the rod for the inside door lock that comes up through the door for the passenger side door. It is the the knob screws on to think ya got one thanks

I will try to grab it before I haul this thing off!

smith2481 · 08-17-2009, 12:42 AM

thanks if you do let me know what I Owe ya should just be able to put it in a envelope and mail it thanks

08-01-2009, 10:47 AM	#52
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: 67 LWB - Pull-a-part Update - Steering wheels is still available - $50 OBO plus the trip.

08-01-2009, 03:04 PM	#53
CSGAS optomistic ah-so Join Date: Mar 2009 Location: Charlotte, NC Posts: 544	Re: 67 LWB - Pull-a-part Update: I was just, just, ju-u-us-st about to leave today to come down for the radiator when my dad called and said he is sending me one as a gift. Kind of hard for me to beat free, but that means I'll be begging off this one. (I am ducking in case anyone wants to throw things at me!) __________________ Rubbing is Racin' Ribbing is Bench Racin' 1970 C-10 lwb Fleetside. Originally 350 2-bbl 3-on-the-tree, m/b, m/w, m/s no a/c. Currently running on a '76 Camaro 305.

08-01-2009, 08:58 PM	#54
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,180	Re: 67 LWB - Pull-a-part ignition lock ring and retainer still available?

08-01-2009, 10:21 PM	#55
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Re: 67 LWB - Pull-a-part Hi, I need the wheel cylinder push rods for the rear drum brakes (see pic #19) and the nuts holding the cylinder to the backing plate. Even 1 nut is fine so I can get a good idea what I need. thanks! __________________ New deadline...when my son can drive. Aloha from Honolulu, HI Last edited by jay-dawg; 08-01-2009 at 10:22 PM.

08-03-2009, 11:02 AM	#57
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,863	Re: 67 LWB - Pull-a-part Not sure if I asked already but does this have or do you still have the vent glass in chrome? __________________ 1967custom

08-14-2009, 09:30 PM	#60
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: 67 LWB - Pull-a-part I am interested in the radiator support.Is it in good condition and if so what is the price?

08-14-2009, 10:42 PM	#61
bowtiedude Registered User Join Date: Nov 2006 Location: Central Pa Posts: 64	Re: 67 LWB - Pull-a-part Do you still have the engine mounts, frame brackets, aka engine stands? __________________ '96 K2500 GMC 6.5 4L80E '88 c1500 RCSB lowered 4 & 6 454 TH700R4 (still being built) '79 K20 Chevy 400 4 spd '69 K20 Chevy 406 4spd '70 K10 Chevy 355 4spd 6 inch lift '70 C-20 (son's truck) originally 292 4spd now a 350 4spd Hey I didn't even want to until you told me I couldn't !

08-15-2009, 12:14 PM	#62
cosmicphish2001 Registered User Join Date: Aug 2009 Location: Aurora, MO Posts: 4	Re: 67 LWB - Pull-a-part i am interested in the heater core box..is it up for sale and if so how much??

08-16-2009, 10:27 AM	#64
bowtiedude Registered User Join Date: Nov 2006 Location: Central Pa Posts: 64	Re: 67 LWB - Pull-a-part PM sent __________________ '96 K2500 GMC 6.5 4L80E '88 c1500 RCSB lowered 4 & 6 454 TH700R4 (still being built) '79 K20 Chevy 400 4 spd '69 K20 Chevy 406 4spd '70 K10 Chevy 355 4spd 6 inch lift '70 C-20 (son's truck) originally 292 4spd now a 350 4spd Hey I didn't even want to until you told me I couldn't !

08-16-2009, 10:46 AM	#65
bbowser Registered User Join Date: Apr 2009 Location: east calais, vt Posts: 9	Re: 67 LWB - Pull-a-part You're keeping the rearend, how are the trailing arms?

08-16-2009, 11:06 AM	#66
smith2481 Registered User Join Date: May 2008 Location: Millwood, WV Posts: 119	Re: 67 LWB - Pull-a-part Hey I am needing the rod for the inside door lock that comes up through the door for the passenger side door. It is the the knob screws on to think ya got one thanks

08-16-2009, 01:35 PM	#67
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: 67 LWB - Pull-a-part Adam, Sent you an e-mail! BBB

08-17-2009, 12:42 AM	#69
smith2481 Registered User Join Date: May 2008 Location: Millwood, WV Posts: 119	Re: 67 LWB - Pull-a-part thanks if you do let me know what I Owe ya should just be able to put it in a envelope and mail it thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.