Hand made fan shroud - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BMSJaX · 08-20-2009, 08:10 PM

Saw these for sale at summit and jegs for about $90 and see no need to pay that much for some sheet aluminum so I made this myself. Only cost me $20 and got it all from home depot, Dropped my engine temp 10 degrees

jgarverick · 08-20-2009, 08:32 PM

cool man. i think i might do something like that myself. what gauge did you use?

BMSJaX · 08-20-2009, 08:37 PM

Quote:

Originally Posted by jgarverick

cool man. i think i might do something like that myself. what gauge did you use?

I used 22 gauge but next time i'd use something more like 18-20 gauge. though the 22 gauge works fine just a little on the flimsy side. Think i'm gonna add some angle aluminum to the top and bottom of mine. it was a 24x38 piece sheet.

Big Fenders · 08-20-2009, 08:38 PM

You must be a 'metal man'...very nice job.
Bob

fryco · 08-20-2009, 09:15 PM

I saw that add for the sheet metal shroud kits. i also made my own, but with fiberglass....

BMSJaX · 08-20-2009, 09:43 PM

Quote:

Originally Posted by fryco

I saw that add for the sheet metal shroud kits. i also made my own, but with fiberglass....

Very nice! I was gonna use fiberglass as well but I prefer the look of and ease of workin with metal.

**Captainfab** · 08-21-2009, 12:21 AM

I took this pic of this nice fan shroud for a mechanical fan at Goodguys last weekend. Definitely took some time and skill, but I think it looked good. Not trying to bash on your shroud BMSJaX yours looks good as well, just a couple different ideas. Just thought I'd post this one for inspiration

degree01 · 08-21-2009, 12:57 PM

wow, very smart man.

shortbed70 · 08-21-2009, 07:58 PM

I wish I had a tig welder and a brake and I would make some but I cant afford them. I made mine out of an old steel bed frame and sheet metal dont have it done yet but here is the frame work.

BMSJaX · 08-21-2009, 09:10 PM

Quote:

Originally Posted by shortbed70

I wish I had a tig welder and a brake and I would make some but I cant afford them. I made mine out of an old steel bed frame and sheet metal dont have it done yet but here is the frame work.

Ya wish i had a brake too! I used my hands and a sheet metal hammer with some clamps and a piece of steel flat bar....

BMSJaX · 08-21-2009, 09:13 PM

Quote:

Originally Posted by Captainfab

I took this pic of this nice fan shroud for a mechanical fan at Goodguys last weekend. Definitely took some time and skill, but I think it looked good. Not trying to bash on your shroud BMSJaX yours looks good as well, just a couple different ideas. Just thought I'd post this one for inspiration

That is nice!

Get me a brake and welder and mine will be the pretty too!

joe231 · 08-21-2009, 09:52 PM

that looks nice!
i'm impressed with the lip you formed where the fan sits....you have any in progress shots?

08-20-2009, 08:10 PM	#1
BMSJaX Registered User Join Date: Sep 2008 Location: Trabuco Canyon, CA Posts: 173	Hand made fan shroud Saw these for sale at summit and jegs for about $90 and see no need to pay that much for some sheet aluminum so I made this myself. Only cost me $20 and got it all from home depot, Dropped my engine temp 10 degrees Attached Images __________________ 1964 Chevy C10 a.k.a. Julie Ann H.E.I. cause its better to be pointless

08-20-2009, 08:32 PM	#2
jgarverick Registered User Join Date: Feb 2009 Location: columbus ohio Posts: 85	Re: Hand made fan shroud cool man. i think i might do something like that myself. what gauge did you use? __________________ Jason Garverick 64 C10 SWB Stepside 350/muncie - 5.3 vortec (soon)Thread 69 AMC Javelin 360/auto - 417 stroker (soon) 68 Scout (Basketcase) 06 Ram HEMI SWB Reg Cab Daily Driver US Army Vet

08-20-2009, 08:38 PM	#4
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Re: Hand made fan shroud You must be a 'metal man'...very nice job. Bob

08-20-2009, 09:15 PM	#5
fryco Registered User Join Date: Jun 2009 Location: somewhere,wi Posts: 170	Re: Hand made fan shroud I saw that add for the sheet metal shroud kits. i also made my own, but with fiberglass.... Attached Images

08-21-2009, 12:21 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Hand made fan shroud I took this pic of this nice fan shroud for a mechanical fan at Goodguys last weekend. Definitely took some time and skill, but I think it looked good. Not trying to bash on your shroud BMSJaX yours looks good as well, just a couple different ideas. Just thought I'd post this one for inspiration Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-21-2009, 12:57 PM	#8
degree01 Registered User Join Date: Oct 2008 Location: Garland texas Posts: 34	Re: Hand made fan shroud wow, very smart man.

08-21-2009, 07:58 PM	#9
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Hand made fan shroud I wish I had a tig welder and a brake and I would make some but I cant afford them. I made mine out of an old steel bed frame and sheet metal dont have it done yet but here is the frame work. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-21-2009, 09:52 PM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Hand made fan shroud that looks nice! i'm impressed with the lip you formed where the fan sits....you have any in progress shots? __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.