Has anyone used a sway bar from newer style truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70clone · 10-03-2009, 07:10 PM

Just wondering what otions are out there

Hottrucks · 10-03-2009, 07:19 PM

I just read some where on the board that the impala bars are adjustable...I'm thinking of adding a sway bar so I think I'll be doing some bone yard shopping/measureing

Tx Firefighter · 10-03-2009, 07:42 PM

http://www.67-72chevytrucks.com/vboa...hlight=swaybar

PanelDeland · 10-03-2009, 07:52 PM

Check out the local "Pull-a-Part" they charged me about $15.00 for one complete with brackets.The bushings are probably good enough to use but I will be replacing them.

Hottrucks · 10-03-2009, 08:01 PM

Quote:

Originally Posted by Hottrucks

I just read some where on the board that the impala bars are adjustable...I'm thinking of adding a sway bar so I think I'll be doing some bone yard shopping/measureing

I'm a dumb ass..I have panard bar on the brain latly.....thanx TX for the link and the info any ideas on a rear sway bar??

**Already Gone** · 10-04-2009, 04:38 AM

Any sway bar from a 73/87 GM truck or Burb will fit. Try to find a 3/4 ton or 1 Ton truck as they have the bigger sway bars. I found mine at a wreckers and it was a 1 1/4" sway bar from a 9000 GVW Camper Special 80's Truck and installed new brackets with the polyuretnane bushing for lowered trucks from ECE and I think that is the best bang for the buck you can do to one of our trucks. I had the bar powdercoated black and with the cost of the bar , the powdercoating and new brackets and bushings I think I have about a 100.00 invested in the bar.

67shortie · 10-04-2009, 08:28 AM

Ditto, I installed mine from a '86 Dually 1.25 bar for $15 at a local pick n pull.

Nice and thick, very little sway now.

lofly'a · 10-04-2009, 09:49 AM

ditto to what they said, picked mine up at the JY for 20 bucks.

Lugnut64052 · 10-04-2009, 01:09 PM

X4.

I got a 1¼" bar offa '87 3/4-ton Suburban for 15 bucks at my local self-pull yard; the bar, brackets, straps, bushings, bolts and nuts (which are the good interference locking nuts too). Re-used everything.

10-03-2009, 07:10 PM	#1
70clone Registered User Join Date: Oct 2006 Location: JACKSONVILLE FL Posts: 200	Has anyone used a sway bar from newer style truck Just wondering what otions are out there

10-03-2009, 07:19 PM	#2
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Has anyone used a sway bar from newer style truck I just read some where on the board that the impala bars are adjustable...I'm thinking of adding a sway bar so I think I'll be doing some bone yard shopping/measureing __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

10-03-2009, 07:42 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Has anyone used a sway bar from newer style truck http://www.67-72chevytrucks.com/vboa...hlight=swaybar __________________ I'm on the Instagram- @Gearhead_Kevin

10-03-2009, 07:52 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Has anyone used a sway bar from newer style truck Check out the local "Pull-a-Part" they charged me about $15.00 for one complete with brackets.The bushings are probably good enough to use but I will be replacing them. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-04-2009, 04:38 AM	#6
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,167	Re: Has anyone used a sway bar from newer style truck Any sway bar from a 73/87 GM truck or Burb will fit. Try to find a 3/4 ton or 1 Ton truck as they have the bigger sway bars. I found mine at a wreckers and it was a 1 1/4" sway bar from a 9000 GVW Camper Special 80's Truck and installed new brackets with the polyuretnane bushing for lowered trucks from ECE and I think that is the best bang for the buck you can do to one of our trucks. I had the bar powdercoated black and with the cost of the bar , the powdercoating and new brackets and bushings I think I have about a 100.00 invested in the bar. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021 Last edited by Already Gone; 10-04-2009 at 04:39 AM.

10-04-2009, 08:28 AM	#7
67shortie Green club Join Date: May 2002 Location: Central CA Posts: 1,059	Re: Has anyone used a sway bar from newer style truck Ditto, I installed mine from a '86 Dually 1.25 bar for $15 at a local pick n pull. Nice and thick, very little sway now. __________________ 71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln

10-04-2009, 09:49 AM	#8
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: Has anyone used a sway bar from newer style truck ditto to what they said, picked mine up at the JY for 20 bucks. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

10-04-2009, 01:09 PM	#9
Lugnut64052 Middle-aged Curmudgeon Join Date: Jun 2008 Location: Independence, MO Posts: 753	Re: Has anyone used a sway bar from newer style truck X4. I got a 1¼" bar offa '87 3/4-ton Suburban for 15 bucks at my local self-pull yard; the bar, brackets, straps, bushings, bolts and nuts (which are the good interference locking nuts too). Re-used everything. __________________ Bret Check out the site's Truck Tech FAQ. Be a site supporter. My more-or-less pathetic build thread. Board members I've met: ------------------------------ Longhorn Man Dieselwrencher jholley big mike71 Last edited by Lugnut64052; 10-04-2009 at 01:14 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.