Hurray made it to car craft. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1FAST68 · 10-08-2009, 12:19 AM

Didn't know if I should post this here but I am exicted. My truck is in the December issue of Car Craft in the "whats your problem" section.

I think it is cool anyway.

Rodms · 10-08-2009, 12:28 AM

Cool maybe you can find the problem.

joeys66pickup · 10-08-2009, 12:58 AM

lets see what it looks like!!(i have no patience)

1FAST68 · 10-08-2009, 01:12 AM

Quote:

Originally Posted by Rodms

Cool maybe you can find the problem.

Really was no problem, just an update to the editor on what my ls engine ran and wanted to use it in the tech section.

skeeterbug · 10-08-2009, 07:29 PM

i belive i just read that article, mabey. i have been a subscriber of theres for over 2 years . was the article about how easy ls motors are to make power with? if so u had like a 6.0 liter ls motor that made x amount of hp run high 11's, then swapped to a 6.2 made more power and run low 11's? just got the scrip yesterday and took it to work this morning to look up the companies on a another GREAT article about parts on the cheap from unsuspecting places like hobby aircraft suppliers for real cheap AN- fittings and the outlandish markup of fasteners @ our local automotive suppliers. BOTH ARE MUST READ ARTICLES IF THATS THE CORRECT ISSUE!

1FAST68 · 10-09-2009, 07:21 AM

Quote:

Originally Posted by skeeterbug

i belive i just read that article, mabey. i have been a subscriber of theres for over 2 years . was the article about how easy ls motors are to make power with? if so u had like a 6.0 liter ls motor that made x amount of hp run high 11's, then swapped to a 6.2 made more power and run low 11's? just got the scrip yesterday and took it to work this morning to look up the companies on a another GREAT article about parts on the cheap from unsuspecting places like hobby aircraft suppliers for real cheap AN- fittings and the outlandish markup of fasteners @ our local automotive suppliers. BOTH ARE MUST READ ARTICLES IF THATS THE CORRECT ISSUE!

Yes that is it.

skeeterbug · 10-09-2009, 07:23 AM

thats so kool , congrats i would be excited as well.

lowtops · 10-12-2009, 12:48 AM

I read your letter and wondered if it was anyone on this forum. I also read the article in '07 about LQ4. I have that motor in my work van.

As a matter of fact, your letter is what brought me back to this forum. I have been lurking for awhile now. One day I will have an old chevy truck.

Nice truck, BTW

Super73 · 10-12-2009, 12:01 PM

Well that's cool for you!! You know how many times I have sent them crap though?

I sent them a ton of pics of my Camaro, what I was planing to do with it, then 1 year later gess what. They have a turbo, 2nd gen F-bod called the F-bomb that is being set up for things like the Silver State Classic (cough couh, hmm, wonder who else is building that).

I have also sent them numerous pics and info on the truck. Even went as far as offering to help co-write an article for a LS cam shootout using my motor and some free dyno time I had coming. I had 5-6 cams in mind. Never heard back from them. What did they do last month or the month before? My exact idea but a few cams short..

Oh well, I stll buy the mag, but hell if I'm sending anything in there again.

Again, glad your truck made it in.

joeys66pickup · 10-12-2009, 04:24 PM

Super' your camaro would smoke the F-bomb....no doubt about it

1FAST68 · 10-12-2009, 05:52 PM

Quote:

Originally Posted by Super73

Well that's cool for you!! You know how many times I have sent them crap though?

I sent them a ton of pics of my Camaro, what I was planing to do with it, then 1 year later gess what. They have a turbo, 2nd gen F-bod called the F-bomb that is being set up for things like the Silver State Classic (cough couh, hmm, wonder who else is building that).

I have also sent them numerous pics and info on the truck. Even went as far as offering to help co-write an article for a LS cam shootout using my motor and some free dyno time I had coming. I had 5-6 cams in mind. Never heard back from them. What did they do last month or the month before? My exact idea but a few cams short..

Oh well, I stll buy the mag, but hell if I'm sending anything in there again.

Again, glad your truck made it in.

Sorry u had so much trouble with that. All I did was ask a question to the editor about timing in the beginning and he wanted to do an writeup on it.

10-08-2009, 12:19 AM	#1
1FAST68 Registered User Join Date: Apr 2008 Location: east, tx Posts: 149	Hurray made it to car craft. Didn't know if I should post this here but I am exicted. My truck is in the December issue of Car Craft in the "whats your problem" section. I think it is cool anyway. __________________ 68 chevy truck ls3, 418ci, pump gas 10.81@121.8 all motor. 1.47 60ft 70 suburban 350 tbi swap, 700r4, work in progress

10-08-2009, 12:28 AM	#2
Rodms Registered User Join Date: Jul 2008 Location: Olive Branch,Mississippi Posts: 347	Re: Hurray made it to car craft. Cool maybe you can find the problem. __________________ Built chevy tuff!

10-08-2009, 12:58 AM	#3
joeys66pickup Dr. Frankenstein Join Date: Feb 2008 Location: beaverton,Or Posts: 458	Re: Hurray made it to car craft. lets see what it looks like!!(i have no patience) __________________ I Wanna Go Fast!!

10-08-2009, 07:29 PM	#5
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: Hurray made it to car craft. i belive i just read that article, mabey. i have been a subscriber of theres for over 2 years . was the article about how easy ls motors are to make power with? if so u had like a 6.0 liter ls motor that made x amount of hp run high 11's, then swapped to a 6.2 made more power and run low 11's? just got the scrip yesterday and took it to work this morning to look up the companies on a another GREAT article about parts on the cheap from unsuspecting places like hobby aircraft suppliers for real cheap AN- fittings and the outlandish markup of fasteners @ our local automotive suppliers. BOTH ARE MUST READ ARTICLES IF THATS THE CORRECT ISSUE! __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

10-09-2009, 07:23 AM	#7
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: Hurray made it to car craft. thats so kool , congrats i would be excited as well. __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

10-12-2009, 12:48 AM	#8
lowtops Registered User Join Date: Jul 2009 Location: Concord, nc Posts: 4	Re: Hurray made it to car craft. I read your letter and wondered if it was anyone on this forum. I also read the article in '07 about LQ4. I have that motor in my work van. As a matter of fact, your letter is what brought me back to this forum. I have been lurking for awhile now. One day I will have an old chevy truck. Nice truck, BTW

10-12-2009, 12:01 PM	#9
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Hurray made it to car craft. Well that's cool for you!! You know how many times I have sent them crap though? I sent them a ton of pics of my Camaro, what I was planing to do with it, then 1 year later gess what. They have a turbo, 2nd gen F-bod called the F-bomb that is being set up for things like the Silver State Classic (cough couh, hmm, wonder who else is building that). I have also sent them numerous pics and info on the truck. Even went as far as offering to help co-write an article for a LS cam shootout using my motor and some free dyno time I had coming. I had 5-6 cams in mind. Never heard back from them. What did they do last month or the month before? My exact idea but a few cams short.. Oh well, I stll buy the mag, but hell if I'm sending anything in there again. Again, glad your truck made it in. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

10-12-2009, 04:24 PM	#10
joeys66pickup Dr. Frankenstein Join Date: Feb 2008 Location: beaverton,Or Posts: 458	Re: Hurray made it to car craft. Super' your camaro would smoke the F-bomb....no doubt about it __________________ I Wanna Go Fast!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.