Question about clearance issue - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SnS C10 · 10-23-2009, 10:30 PM

i have a 79 2wd blazer. not sure but i think it has drop spindles on the front. the tires in front are about 3 1/4" front the top if the INNER fenderwell not the outer fender lip. if i cut 1 coil off, will i have a clearance issue with the tire hitting the inner fenderwell or will it still roll and drive ok besides the stiffer front end? thanks for the help

tvblazer78 · 10-24-2009, 08:27 AM

Ya you will rub if you hit a big bump if you go any lower..

SnS C10 · 10-24-2009, 12:48 PM

how about if i remove the inner fender?

tvblazer78 · 10-24-2009, 10:33 PM

Quote:

Originally Posted by Shaun23a11en

how about if i remove the inner fender?

If you did that it can go lower then. You can always put air bags on it..

10-23-2009, 10:30 PM	#1
SnS C10 Registered User Join Date: Jul 2004 Location: Lomita, Ca Posts: 1,225	Question about clearance issue i have a 79 2wd blazer. not sure but i think it has drop spindles on the front. the tires in front are about 3 1/4" front the top if the INNER fenderwell not the outer fender lip. if i cut 1 coil off, will i have a clearance issue with the tire hitting the inner fenderwell or will it still roll and drive ok besides the stiffer front end? thanks for the help

10-24-2009, 08:27 AM	#2
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Question about clearance issue Ya you will rub if you hit a big bump if you go any lower.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

10-24-2009, 12:48 PM	#3
SnS C10 Registered User Join Date: Jul 2004 Location: Lomita, Ca Posts: 1,225	Re: Question about clearance issue how about if i remove the inner fender?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.