Dropmember and static drop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIG KRIS · 10-27-2009, 01:25 AM

Is anyone running a static drop using the front porterbuilt dropmember?

*vegaschevy* · 10-27-2009, 06:31 AM

Im sure Nate will chime in with a few pics of what it looks like. Ill be going this route on my truck eventually as it allows you with Porterbuilts design to run a big block or LS motor with a quick change of the motor mounts

Custom 68 · 10-29-2009, 12:31 PM

I am curious too, I would think coil overs would be a great setup.

PBFAB.COM · 10-29-2009, 01:13 PM

The coil-over Dropmember still has a couple small tweaks I making to the upper coil-over mount.

As for the "static" that Kris was referring to, I had mentioned to him that there have been a number of DM owners who elected to bi-pass an air management system and use a schrader valve set-up for a "static" height, with the option for adjusting it with a shop compressor.

BIG KRIS · 10-30-2009, 02:07 AM

Why thank you Natehen for clearing that up for me as we both know i'm taking bagging 101

So there will be a DROPMEMBER that one can use coil overs huh?

10-27-2009, 01:25 AM	#1
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Dropmember and static drop Is anyone running a static drop using the front porterbuilt dropmember?

10-27-2009, 06:31 AM	#2
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Dropmember and static drop Im sure Nate will chime in with a few pics of what it looks like. Ill be going this route on my truck eventually as it allows you with Porterbuilts design to run a big block or LS motor with a quick change of the motor mounts

10-29-2009, 12:31 PM	#3
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	Re: Dropmember and static drop I am curious too, I would think coil overs would be a great setup. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

10-29-2009, 01:13 PM	#4
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Dropmember and static drop The coil-over Dropmember still has a couple small tweaks I making to the upper coil-over mount. As for the "static" that Kris was referring to, I had mentioned to him that there have been a number of DM owners who elected to bi-pass an air management system and use a schrader valve set-up for a "static" height, with the option for adjusting it with a shop compressor. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-30-2009, 02:07 AM	#5
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Dropmember and static drop Why thank you Natehen for clearing that up for me as we both know i'm taking bagging 101So there will be a DROPMEMBER that one can use coil overs huh?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.