6 lug disc w/88 and up parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcmullinauctions · 11-05-2009, 11:25 AM

70Suburban...thanks for the email. You did a great job on that write up. Why did you cut out a coil though?

Captainfab...Thanks for the tip on the rear end. Can you reweld the panhard bracket onto the newer rearend to get the correct angle or is it different altogether?

How do I do the copy/past quote thing you guys did when responding?

Thanks for the help!

70 Suburban · 11-05-2009, 11:37 AM

Quote:

Originally Posted by mcmullinauctions

70Suburban...thanks for the email. You did a great job on that write up. Why did you cut out a coil though?

Captainfab...Thanks for the tip on the rear end. Can you reweld the panhard bracket onto the newer rearend to get the correct angle or is it different altogether?

How do I do the copy/past quote thing you guys did when responding?

Thanks for the help!

use the quote brackets [].. I cut one coil because I like where it sits. that will put the tire flush with the fender. ill put blocks in the back. That should level it out.

**Captainfab** · 11-06-2009, 01:14 AM

Yes you can weld the panhard bar bracket on the axle tube of the '69 rear end. I didn't know if you had the capability of doing that.

What I did in this post is just click on the 'Quote' box in the lower right of the post that I want to quote. If you want to quote more that one, click on 'MQuote' on the first one(s) and then 'Quote' on the last one

Quote:

Originally Posted by mcmullinauctions

70Suburban...thanks for the email. You did a great job on that write up. Why did you cut out a coil though?

Captainfab...Thanks for the tip on the rear end. Can you reweld the panhard bracket onto the newer rearend to get the correct angle or is it different altogether?

How do I do the copy/past quote thing you guys did when responding?

Thanks for the help!

redneck6 · 11-06-2009, 07:44 PM

so this is a bitt off topic , will the entiere front end off a 88-98 chevy 5 lug half ton swap over to a 66 c10 and also the rear axle i can get a good price (free) brake booster and power steering and all . and thank you in advance .

SCOTI · 11-06-2009, 09:13 PM

Quote:

Originally Posted by redneck6

so this is a bitt off topic , will the entiere front end off a 88-98 chevy 5 lug half ton swap over to a 66 c10 and also the rear axle i can get a good price (free) brake booster and power steering and all . and thank you in advance .

No, the 88-98 front suspensions are not a bolt-in swap; 71-87 front suspensions are. Any rear housing will typically work provided you have the ability to weld the appropriate brackets on to the housing.

redneck6 · 11-06-2009, 09:16 PM

so cross meber is out , what about control arms and spindels will they bolt to the 66 stuff . ? i can cut weld and drill most any thing .

SCOTI · 11-06-2009, 09:35 PM

Quote:

Originally Posted by redneck6

so cross meber is out , what about control arms and spindels will they bolt to the 66 stuff . ? i can cut weld and drill most any thing .

Again, no. The spindles can work w/the existing upper a-arms & 3/4 ton lower a-ar,s from a 6X-87 truck. That being said.... if you're capable of fabbing, anything can be done w/enough desire.

**ChiefRocka** · 11-06-2009, 10:15 PM

When the time comes, I was also thinking of using the 88-98 stuff. Thinking there are more brake options with these years (??)

11-05-2009, 11:25 AM	#26
mcmullinauctions McMullin Join Date: Jul 2007 Location: Missouri Posts: 129	Re: 6 lug disc w/88 and up parts 70Suburban...thanks for the email. You did a great job on that write up. Why did you cut out a coil though? Captainfab...Thanks for the tip on the rear end. Can you reweld the panhard bracket onto the newer rearend to get the correct angle or is it different altogether? How do I do the copy/past quote thing you guys did when responding? Thanks for the help!

11-06-2009, 07:44 PM	#29
redneck6 Registered User Join Date: Jul 2009 Location: sparks nv Posts: 142	Re: 6 lug disc w/88 and up parts so this is a bitt off topic , will the entiere front end off a 88-98 chevy 5 lug half ton swap over to a 66 c10 and also the rear axle i can get a good price (free) brake booster and power steering and all . and thank you in advance .

11-06-2009, 09:16 PM	#31
redneck6 Registered User Join Date: Jul 2009 Location: sparks nv Posts: 142	Re: 6 lug disc w/88 and up parts so cross meber is out , what about control arms and spindels will they bolt to the 66 stuff . ? i can cut weld and drill most any thing .

11-06-2009, 10:15 PM	#33
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: 6 lug disc w/88 and up parts When the time comes, I was also thinking of using the 88-98 stuff. Thinking there are more brake options with these years (??) __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.