CA 72 Longbed frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sleepertruck72 · 10-31-2009, 08:33 PM

Anyone need anything cut off this frame ? I am unbolting the front clip for my 67 and junking the rest. Let me know. I plan on doing this in the next 1-2 weeks. Thanks

ewoody625 · 11-01-2009, 02:42 PM

Hey, sorry to butt into your thread but I was just curious what is a lwb frame worth? Does it make any difference between coil or leaf springs?
Thanks
Eric

sleepertruck72 · 11-01-2009, 02:55 PM

I honestly have no idea. A bare frame maybe $ 50-200 depending on the rust factor ?

ewoody625 · 11-02-2009, 05:30 PM

ok thanks

drob_NY · 11-04-2009, 11:18 PM

do you know if the 2 and 4 wheel frames are similar? I am looking for the a frame section on the driver side between the rear axle and bumper.

**leddzepp** · 11-05-2009, 04:27 AM

Hey Jorge....you updating to disk brakes on the front?

screamin_c10 · 11-05-2009, 01:12 PM

I could use the 2 trailing arm brackets that are riveted to the crossmember....shipped to 97051

sleepertruck72 · 11-05-2009, 02:44 PM

Quote:

Originally Posted by drob_NY

do you know if the 2 and 4 wheel frames are similar? I am looking for the a frame section on the driver side between the rear axle and bumper.

I am not sure if they are the same or not. Maybe some of the 4x4'ers can let us know.

Quote:

Originally Posted by leddzepp

Hey Jorge....you updating to disk brakes on the front?

Scott,
Yup I am taking this 5 lug off finally and hooking up the little stepper with disc brakes

Quote:

Originally Posted by screamin_c10

I could use the 2 trailing arm brackets that are riveted to the crossmember....shipped to 97051

I will take them off today or tomorrow if I get a chance. How's 25 bucks shipped sound to you ?

screamin_c10 · 11-06-2009, 01:43 AM

Quote:

Originally Posted by sleepertruck72

I will take them off today or tomorrow if I get a chance. How's 25 bucks shipped sound to you ?

Sold! do you have a paypal address I can send the money to?

sleepertruck72 · 11-06-2009, 12:31 PM

ScreaminC10
PM sent with payment info.

drob_NY · 11-06-2009, 01:14 PM

Can you send me some images of that section, so I can try to match them up?

**leddzepp** · 11-06-2009, 02:52 PM

Jorge- I am interested in the cross sills for the bed floor. I can pick them up from you next time you are down here in OC, if they fit in the vehicle you roll down in. Shipping would be too much of a hassle and cost.

sleepertruck72 · 11-07-2009, 12:31 AM

Quote:

Originally Posted by screamin_c10

Sold! do you have a paypal address I can send the money to?

ScreaminC10
payment received, I will ship them out by Monday but I will try my best to get them out tomorrow. Thanks !

Quote:

Originally Posted by drob_NY

Can you send me some images of that section, so I can try to match them up?

I will get some pics tomorrow morning

Quote:

Originally Posted by leddzepp

Jorge- I am interested in the cross sills for the bed floor. I can pick them up from you next time you are down here in OC, if they fit in the vehicle you roll down in. Shipping would be too much of a hassle and cost.

Scott,
I will set them aside for you. I am not sure on Thanksgiving this year, but I am sure of Christmas for being in SoCal. I will take them with me.

Jorge

*2tons of fun* · 11-07-2009, 01:02 AM

what do you want for the rear axle and rear springs?

**leddzepp** · 11-07-2009, 04:17 AM

Quote:

Originally Posted by sleepertruck72

Scott,
I will set them aside for you. I am not sure on Thanksgiving this year, but I am sure of Christmas for being in SoCal. I will take them with me.

Jorge

Thanks Jorge! Sounds great either way. They all look good and the rear one still has some paint on it! TTT.

sleepertruck72 · 11-07-2009, 01:44 PM

Quote:

Originally Posted by 2tons of fun

what do you want for the rear axle and rear springs?

2tons of fun,
How does $50 sound to you ? Just to avoid possible confusion, the rear axle is the 6 lug from my 67. It is complete drum to drum, I am not sure of the gear ratio.
Thanks

sleepertruck72 · 11-08-2009, 10:10 PM

I have the trailing arms, any takers at $20

dfwright · 11-08-2009, 11:58 PM

How much for the exhaust hangers --the one shown in picture 2, and the one behind the driver side rear tire, kinda shown in picture 3?

sleepertruck72 · 11-09-2009, 02:33 AM

Quote:

Originally Posted by dfwright

How much for the exhaust hangers --the one shown in picture 2, and the one behind the driver side rear tire, kinda shown in picture 3?

dfwright, I see the one in picture 2, but am not sure about the pic 3. I can snap a pic of it in the morning since I have since stripped the bed rails, and just about everything but the crossmembers off this thing. I just want to make sure the piece you need is what's there.
How does $25 shipped sound to you ?

dfwright · 11-09-2009, 09:23 AM

The other hanger is behind the rear driver tire, and looks like the picture below: You can just see it through the boards in picture 3, if I am not mistaken.

$25 shipped for the two hangers sounds great. PM me your paypal info, and I'll pay up and send you the mailing address. Thanks!

sleepertruck72 · 11-10-2009, 01:10 AM

Quote:

Originally Posted by dfwright

The other hanger is behind the rear driver tire, and looks like the picture below: You can just see it through the boards in picture 3, if I am not mistaken.

$25 shipped for the two hangers sounds great. PM me your paypal info, and I'll pay up and send you the mailing address. Thanks!

dfwright,
I got the hangers off. I snapped pictures this morning, but looks like you beat me to it. I am sending a PM with paypal info. Thanks !

Jetmech727 · 11-11-2009, 12:06 AM

I need a carrier bearing bracket

sleepertruck72 · 11-11-2009, 02:17 AM

Quote:

Originally Posted by Jetmech727

I need a carrier bearing bracket

Jetmech,
I have it in my garage. How does $25 shipped sound to you ?

Jetmech727 · 11-11-2009, 06:07 AM

That sounds great just shoot me a PM with payment info. Thanks Ryan

sleepertruck72 · 11-12-2009, 01:20 AM

Jetmech727,
the bracket is yours, PM sent

10-31-2009, 08:33 PM	#1
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	72 Longbed frame Anyone need anything cut off this frame ? I am unbolting the front clip for my 67 and junking the rest. Let me know. I plan on doing this in the next 1-2 weeks. Thanks Attached Images __________________ 72 C20 Longbed 05 1500 Z71

11-01-2009, 02:42 PM	#2
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: 72 Longbed frame Hey, sorry to butt into your thread but I was just curious what is a lwb frame worth? Does it make any difference between coil or leaf springs? Thanks Eric __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

11-01-2009, 02:55 PM	#3
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 72 Longbed frame I honestly have no idea. A bare frame maybe $ 50-200 depending on the rust factor ? __________________ 72 C20 Longbed 05 1500 Z71

11-02-2009, 05:30 PM	#4
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: 72 Longbed frame ok thanks __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

11-04-2009, 11:18 PM	#5
drob_NY Registered User Join Date: Jun 2009 Location: Saratoga Springs, NY Posts: 20	Re: 72 Longbed frame do you know if the 2 and 4 wheel frames are similar? I am looking for the a frame section on the driver side between the rear axle and bumper. __________________ DROB_NY

11-05-2009, 04:27 AM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,046	Re: 72 Longbed frame Hey Jorge....you updating to disk brakes on the front? __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-05-2009, 01:12 PM	#7
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: 72 Longbed frame I could use the 2 trailing arm brackets that are riveted to the crossmember....shipped to 97051 __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

11-06-2009, 12:31 PM	#10
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 72 Longbed frame ScreaminC10 PM sent with payment info. __________________ 72 C20 Longbed 05 1500 Z71

11-06-2009, 01:14 PM	#11
drob_NY Registered User Join Date: Jun 2009 Location: Saratoga Springs, NY Posts: 20	Re: 72 Longbed frame Can you send me some images of that section, so I can try to match them up? __________________ DROB_NY

11-06-2009, 02:52 PM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,046	Re: 72 Longbed frame Jorge- I am interested in the cross sills for the bed floor. I can pick them up from you next time you are down here in OC, if they fit in the vehicle you roll down in. Shipping would be too much of a hassle and cost. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-07-2009, 01:02 AM	#14
2tons of fun Account Suspended Join Date: Jan 2009 Location: galt ca, Posts: 749	Re: 72 Longbed frame what do you want for the rear axle and rear springs?

11-08-2009, 10:10 PM	#17
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 72 Longbed frame I have the trailing arms, any takers at $20 __________________ 72 C20 Longbed 05 1500 Z71

11-08-2009, 11:58 PM	#18
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,376	Re: 72 Longbed frame How much for the exhaust hangers --the one shown in picture 2, and the one behind the driver side rear tire, kinda shown in picture 3? __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

11-09-2009, 09:23 AM	#20
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,376	Re: 72 Longbed frame The other hanger is behind the rear driver tire, and looks like the picture below: You can just see it through the boards in picture 3, if I am not mistaken. $25 shipped for the two hangers sounds great. PM me your paypal info, and I'll pay up and send you the mailing address. Thanks! Attached Images __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

11-11-2009, 12:06 AM	#22
Jetmech727 Registered User Join Date: Sep 2004 Location: Indianapolis,IN Posts: 148	Re: 72 Longbed frame I need a carrier bearing bracket __________________ "When cows laugh, does milk come out of their nose?"



Register or Log In To remove these advertisements.

11-11-2009, 06:07 AM	#24
Jetmech727 Registered User Join Date: Sep 2004 Location: Indianapolis,IN Posts: 148	Re: 72 Longbed frame That sounds great just shoot me a PM with payment info. Thanks Ryan __________________ "When cows laugh, does milk come out of their nose?"

11-12-2009, 01:20 AM	#25
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 72 Longbed frame Jetmech727, the bracket is yours, PM sent __________________ 72 C20 Longbed 05 1500 Z71

Register or Log In To remove these advertisements.