The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-12-2009, 07:16 PM   #1
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Need help with 22's

I can get these 22's for $1,600 brand new from a tire shop here local. I'm having a hard time with this dead 5x5 bolt pattern. They are hard to find anywhere since no new car dealer really makes the 5x5 anymore, they are all 6x5.5 anymore. This wheel was in a tire shop, and had a tire mounted, and they let me take it and see what it looked like and how it fit. I got it at my place and here's the pics.


It fits perfect out back.


Does't lay out.


Here's why lol. I think after I cut it will lay out, but will the tire come up in the hood?


Do I need a smaller tire? The setup is 22x10, 6.29bs, and 265/35's.

Just want to hear everyones opinions on this setup, and how the wheels look.

Last edited by The Big Green; 11-12-2009 at 07:18 PM.
The Big Green is offline   Reply With Quote
Old 11-12-2009, 07:54 PM   #2
fiddy9apache
Registered User
 
fiddy9apache's Avatar
 
Join Date: Aug 2009
Location: ftw tex
Posts: 682
Re: Need help with 22's

smaller tire. and there plenty of 5x5 wheels out there. most of your big name billet wheel companys make 5x5.
fiddy9apache is offline   Reply With Quote
Old 11-12-2009, 08:09 PM   #3
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

These are from a local shop and they are $200 a wheel. Billets aren't $200 per wheel.
The Big Green is offline   Reply With Quote
Old 11-12-2009, 08:23 PM   #4
Shane
Account Suspended
 
Shane's Avatar
 
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
Re: Need help with 22's

You asked for opinions, so here goes.

They look like they belong on a late '70's Cutlass Supreme with metal flake paint.
Shane is offline   Reply With Quote
Old 11-12-2009, 08:25 PM   #5
fiddy9apache
Registered User
 
fiddy9apache's Avatar
 
Join Date: Aug 2009
Location: ftw tex
Posts: 682
Re: Need help with 22's

Quote:
Originally Posted by The Big Green View Post
These are from a local shop and they are $200 a wheel. Billets aren't $200 per wheel.
centerline makes 22s for around 200 a wheel and they have good offsets. i have a set of bonspeeds and a set of centerlines and you get what you pay for,but for the price of centerlines there hard to beat.

chrome wheels an older vehicles arnt my style but each there own.
fiddy9apache is offline   Reply With Quote
Old 11-12-2009, 08:31 PM   #6
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

Quote:
Originally Posted by Shane View Post
You asked for opinions, so here goes.

They look like they belong on a late '70's Cutlass Supreme with metal flake paint.

Donk wheels? lol
The Big Green is offline   Reply With Quote
Old 11-12-2009, 08:34 PM   #7
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

I'm a poor boy. I don't wanna spend over $300 a wheel.
The Big Green is offline   Reply With Quote
Old 11-12-2009, 08:36 PM   #8
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

On a dark Forrest green 67, what would look the best? I've juggled chrome, and black and machined. It's so hard to choose.
The Big Green is offline   Reply With Quote
Old 11-12-2009, 08:58 PM   #9
bedsled71
Registered User
 
bedsled71's Avatar
 
Join Date: Feb 2007
Location: yuma arizona
Posts: 448
Re: Need help with 22's

that tire size is 29.30 inches. i wouldnt even think about puting a 30 series tire on it. dont get wheels just because they are cheap for you, get what you really like and also think about the availability of getting a new one if something happens to one ( crack/ bent )
i work for a wheel and tire shop and i see 20's and up with ruined wheels that are discountinued or unable to find
bedsled71 is offline   Reply With Quote
Old 11-12-2009, 09:05 PM   #10
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
Re: Need help with 22's

There is nothing wrong with putting a chrome wheel on a classic truck. Putting "that" wheel on one is another story. It's just not an attractive wheel in "my opinion".

We can all appreciate being on a tight budget. Regardless of your budget, don't make choices that you might regret later.

If "you" like that wheel, then go for it. If your considering it only because its cheap, please keep looking
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 11-12-2009, 09:21 PM   #11
jjjmm56
Registered User
 
jjjmm56's Avatar
 
Join Date: Jan 2009
Location: kissimmee Florida
Posts: 494
Re: Need help with 22's

I don't know what you plan for paint but you can make those work. To knock down the bling a little paint the sections between the spokes to mach the truck. A little detail goes a long way
jjjmm56 is offline   Reply With Quote
Old 11-12-2009, 10:00 PM   #12
bagged74
its just $$$$$
 
bagged74's Avatar
 
Join Date: Jul 2003
Location: OK
Posts: 2,078
Re: Need help with 22's

You can find a wheel that fits the truck alot better than that...id be glad to help you if you'd like. just give me a call
bagged74 is offline   Reply With Quote
Old 11-12-2009, 10:09 PM   #13
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: Need help with 22's

Quote:
Originally Posted by bagged74 View Post
You can find a wheel that fits the truck alot better than that...
x10.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 11-12-2009, 10:14 PM   #14
Ronm909
67GMC Slammed
 
Ronm909's Avatar
 
Join Date: Feb 2009
Location: Rancho Cucamonga, Ca
Posts: 255
Re: Need help with 22's

thats why most go with a 22" in rear 20" front.. eaiser to fully lay

Last edited by Ronm909; 11-12-2009 at 10:16 PM.
Ronm909 is offline   Reply With Quote
Old 11-12-2009, 10:36 PM   #15
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

Quote:
Originally Posted by bagged74 View Post
You can find a wheel that fits the truck alot better than that...id be glad to help you if you'd like. just give me a call
Your good buddy JJ seemed to really like this wheel lol. Different people, different opinions.
The Big Green is offline   Reply With Quote
Old 11-12-2009, 10:42 PM   #16
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

Quote:
Originally Posted by Ronm909 View Post
thats why most go with a 22" in rear 20" front.. eaiser to fully lay
I planned on a 22/24 setup. The rear is notched to lay on a 32, or 33in tire. I forget which one.


I'm just wanting opinions on for a choice. If I got a wheel like Coy's that most people get, I could go grey center, or black, or whatever.
The Big Green is offline   Reply With Quote
Old 11-12-2009, 10:48 PM   #17
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

Yes, the price was selling me on this wheel, and the fact it's different for this year range trucks was also the catch. I do like the Coys, but they are very common on these trucks for sure. Also, let's say I just get tires I want then I can get wheels, with my budget this may help. I can get what I want and not have to get a cheap set all at once. Also, let's say this size and bs, if I get a set I can choose my width, if let's say I want a deeper dish wheel I would narrow the rear and get a smaller bs to make up for this and get a deeper lip?
The Big Green is offline   Reply With Quote
Old 11-12-2009, 11:50 PM   #18
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: Need help with 22's

Quote:
Originally Posted by The Big Green View Post
....Also, let's say this size and bs, if I get a set I can choose my width, if let's say I want a deeper dish wheel I would narrow the rear and get a smaller bs to make up for this and get a deeper lip?
Correct.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 11-13-2009, 12:21 AM   #19
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

Quote:
Originally Posted by SCOTI View Post
Correct.
Then I need to find a wheel in a 10in wide and some thing like 4.29bs, that's a 10in and 6.29 in the pic and the lips like 3in or so. I couldn't find a Coy in a 22 and I know they are out there.
The Big Green is offline   Reply With Quote
Old 11-13-2009, 09:10 AM   #20
scotts62
One day...
 
scotts62's Avatar
 
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
Re: Need help with 22's

Just ran across this, just a thought of what 22in Coys would look like on your truck
LOOKY
__________________
Scott

93 crew cab build
Project 62

Last edited by scotts62; 11-13-2009 at 09:11 AM.
scotts62 is offline   Reply With Quote
Old 11-13-2009, 10:03 AM   #21
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

That's pretty sweet man. I love that wheel but there's so many out there, don't guess it matters if I like it. Still comes in a grey, and black too. I still couldn't find a 22 on Coywheels or backspacing options. Also wonder if a 22x10 with 6.29ish bs would look like that truck on the back?


Think it's time to post my truck on the Photoshop section.
The Big Green is offline   Reply With Quote
Old 11-13-2009, 10:54 AM   #22
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: Need help with 22's

Quote:
Originally Posted by The Big Green View Post
That's pretty sweet man. I love that wheel but there's so many out there, don't guess it matters if I like it. Still comes in a grey, and black too. I still couldn't find a 22 on Coywheels or backspacing options. Also wonder if a 22x10 with 6.29ish bs would look like that truck on the back?


Think it's time to post my truck on the Photoshop section.
Coys are avail 22x9 w/5.50" back spacing.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 11-13-2009, 11:01 AM   #23
The Big Green
Registered User
 
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,304
Re: Need help with 22's

Quote:
Originally Posted by SCOTI View Post
Coys are avail 22x9 w/5.50" back spacing.
Yea, I found it finally. That's basically what I need in a bs, it should look like the truck he posted above in the link. I have the 5x5 from that year truck.
The Big Green is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:28 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com