TX 67-72 3Speed Column with wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clyde65** · 11-13-2009, 03:41 PM

I have a 67-72 ( it says 68) three speed column shift left over from an old project. I would like $75.00 for it, plus actual shipping, OBO.

Thanks,

CLyde65

1968CHEVYC10 · 11-13-2009, 11:06 PM

I'll be going to jacksboro (northwest of FW) for thanksgiving, driving from houston. so i could pick it up. how did it shift when it was on a truck? and does it make a difference if its for power or manual steering?

**Clyde65** · 11-16-2009, 10:29 AM

I really dont know how it shifted, I bought it, cuz told it was an auto, my mistake. But it seams to move well, the wheel is in fair condition, if your interested. let me know and I can have it ready for you, and meet you somewhere. I dont know about the power or manual tho

1968CHEVYC10 · 11-16-2009, 06:48 PM

ok, I've hopefully got somebody coming to look at my truck on Thursday, and he should be able to tell me whether the problem with my column is easily fixable or not, I know alot of these 3 spd columns developed problems over the years, and I think were usually fixable. I think there's an article in the FAQ's about this, I'll try and read up on it tonight and see if I can't figure this one so I can get back with you sooner.

My F4i · 11-18-2009, 12:56 AM

is the wiring still intact in it? I live in Garland and have a 69 but the previous owner destroyed the wiring in mine and broke off the turn signal switch so im looking to replace those parts thanks

**Clyde65** · 11-18-2009, 10:32 AM

It looks all complete and unmolested, I havent taken the wheel off but it looks good.

11-13-2009, 03:41 PM	#1
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,548	67-72 3Speed Column with wheel I have a 67-72 ( it says 68) three speed column shift left over from an old project. I would like $75.00 for it, plus actual shipping, OBO. Thanks, CLyde65 Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 11-13-2009 at 03:42 PM.

11-13-2009, 11:06 PM	#2
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: 67-72 3Speed Column with wheel I'll be going to jacksboro (northwest of FW) for thanksgiving, driving from houston. so i could pick it up. how did it shift when it was on a truck? and does it make a difference if its for power or manual steering? __________________ '68 C10 LWB 6.2NA/NP833 3.73's

11-16-2009, 10:29 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,548	Re: 67-72 3Speed Column with wheel I really dont know how it shifted, I bought it, cuz told it was an auto, my mistake. But it seams to move well, the wheel is in fair condition, if your interested. let me know and I can have it ready for you, and meet you somewhere. I dont know about the power or manual tho __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 11-16-2009 at 10:30 AM.

11-16-2009, 06:48 PM	#4
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: 67-72 3Speed Column with wheel ok, I've hopefully got somebody coming to look at my truck on Thursday, and he should be able to tell me whether the problem with my column is easily fixable or not, I know alot of these 3 spd columns developed problems over the years, and I think were usually fixable. I think there's an article in the FAQ's about this, I'll try and read up on it tonight and see if I can't figure this one so I can get back with you sooner. __________________ '68 C10 LWB 6.2NA/NP833 3.73's

11-18-2009, 12:56 AM	#5
My F4i Registered User Join Date: May 2009 Location: Texas Posts: 28	Re: 67-72 3Speed Column with wheel is the wiring still intact in it? I live in Garland and have a 69 but the previous owner destroyed the wiring in mine and broke off the turn signal switch so im looking to replace those parts thanks

11-18-2009, 10:32 AM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,548	Re: 67-72 3Speed Column with wheel It looks all complete and unmolested, I havent taken the wheel off but it looks good. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.