Finnished putting a Mar-k Rollpan on! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mwooten92 · 11-29-2009, 11:23 PM

so i ordered a rollpan from mar-k and got here in 2 day shipping!! very fast shipping.the following weekend my dad and i drilled some license plate holes in it then welded the seam around the license plate box closed. welded the rollpan on the bed and grinded the welds all down and wiped bondo to fill in the cab corners and floated it out. this weekend we finnished it up with some primer. tell me what u think?

had to cut this section out

KQQL IT · 11-29-2009, 11:28 PM

Looks great! How much license plate is going to hang below the pan?

mwooten92 · 11-29-2009, 11:30 PM

Quote:

Originally Posted by KQQL IT

Looks great! How much license plate is going to hang below the pan?

id have to measure but its less then half an inch. hardly noticeable

**N2TRUX** · 11-29-2009, 11:34 PM

That turned out awesome! It's nice to know that they fit so well.

For those that might not know, Mar-k is one of our forum vendors. They are great people to work with and offer fantastic customer service.

KQQL IT · 11-29-2009, 11:43 PM

Sweet. It looks goofy when the plate hangs below the pan.

ratty 46 · 11-30-2009, 12:41 AM

Nice clean install.

Ratty 46

11-29-2009, 11:23 PM	#1
mwooten92 Registered User Join Date: Jul 2009 Location: Memphis Posts: 336	Finnished putting a Mar-k Rollpan on! so i ordered a rollpan from mar-k and got here in 2 day shipping!! very fast shipping.the following weekend my dad and i drilled some license plate holes in it then welded the seam around the license plate box closed. welded the rollpan on the bed and grinded the welds all down and wiped bondo to fill in the cab corners and floated it out. this weekend we finnished it up with some primer. tell me what u think? had to cut this section out __________________ 85 C-10 ShortBoxChevy! Build Thread of my 85' C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=367919

11-29-2009, 11:28 PM	#2
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,257	Re: Finnished putting a Mar-k Rollpan on! Looks great! How much license plate is going to hang below the pan?

11-29-2009, 11:34 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Finnished putting a Mar-k Rollpan on! That turned out awesome! It's nice to know that they fit so well. For those that might not know, Mar-k is one of our forum vendors. They are great people to work with and offer fantastic customer service. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-29-2009, 11:43 PM	#5
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,257	Re: Finnished putting a Mar-k Rollpan on! Sweet. It looks goofy when the plate hangs below the pan. Last edited by KQQL IT; 11-29-2009 at 11:43 PM. Reason: 'tard

11-30-2009, 12:41 AM	#6
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: Finnished putting a Mar-k Rollpan on! Nice clean install. Ratty 46



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.