NJ Full Length Hedman Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wild83C10 · 11-22-2009, 08:54 PM

I am selling used Hedman Headers. I used them for just over a year and a half. I cut off the cheaper Hedman ball flanges and welded on a set of Flowmaster Ball Flanges. There are three O2 sensor ports. One port has a plug and easy access for dyno sessions. These are the larger 1-3/4" primary diameter pipes for larger displacement SBC. You may need to ccut the inner edge of the frame a bit (1/4") for clearance down by the flanges. Let me know if there are any questions.
Please post in this thread first if you are interested.

Hedmen P/N: 69080
Link
Please check your application first (wont work with manual column shifter according to Hedman)

$200 shipped

Scootin 81 C20 · 11-22-2009, 09:34 PM

Can I get a pic of them? I have a pair of Heddman long tubes for my truck, but I can't read the part number on them.

Wild83C10 · 11-23-2009, 09:56 PM

Scootin, here are some pictures of them installed. I will get some later this week of them un-installed.

Scootin 81 C20 · 11-23-2009, 10:14 PM

Those are kinda like mine, but not quite. Here's mine. Maybe you know which model or part # they are.

Wild83C10 · 12-03-2009, 09:16 PM

No one interested? Good set of headers and collectors.

Scootin 81 C20 · 12-04-2009, 08:57 PM

If I was closer and had the money, I'd grab them.

Wild83C10 · 12-10-2009, 03:40 PM

$175 shipped

11-22-2009, 08:54 PM	#1
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Full Length Hedman Headers I am selling used Hedman Headers. I used them for just over a year and a half. I cut off the cheaper Hedman ball flanges and welded on a set of Flowmaster Ball Flanges. There are three O2 sensor ports. One port has a plug and easy access for dyno sessions. These are the larger 1-3/4" primary diameter pipes for larger displacement SBC. You may need to ccut the inner edge of the frame a bit (1/4") for clearance down by the flanges. Let me know if there are any questions. Please post in this thread first if you are interested. Hedmen P/N: 69080 Link Please check your application first (wont work with manual column shifter according to Hedman) $200 shipped __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 11-24-2009 at 10:19 PM. Reason: added pictures

11-22-2009, 09:34 PM	#2
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Full Length Hedman Headers Can I get a pic of them? I have a pair of Heddman long tubes for my truck, but I can't read the part number on them. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

11-23-2009, 09:56 PM	#3
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Full Length Hedman Headers Scootin, here are some pictures of them installed. I will get some later this week of them un-installed. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 11-24-2009 at 10:09 PM. Reason: removed some photos

11-23-2009, 10:14 PM	#4
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Full Length Hedman Headers Those are kinda like mine, but not quite. Here's mine. Maybe you know which model or part # they are. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-03-2009, 09:16 PM	#5
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Full Length Hedman Headers No one interested? Good set of headers and collectors. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

12-04-2009, 08:57 PM	#6
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Full Length Hedman Headers If I was closer and had the money, I'd grab them. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-10-2009, 03:40 PM	#7
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Full Length Hedman Headers $175 shipped __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.