|
12-22-2009, 07:31 PM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: kankakee,il
Posts: 83
|
motor questions
i have a 72' 402 that i'd like to get about 450 hp out of can someone tell me what parts i'd need?i want to run a 175-200 shot of nitrous will the stock pistons handle it?
|
|
|
|
12-22-2009, 11:26 PM
|
#2 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: motor questions
I would put a forged piston in it if you are gonna spray it that hard.
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
12-24-2009, 04:24 PM
|
#3 |
|
Account Suspended
Join Date: Oct 2009
Location: Sammamish, WA
Posts: 2,404
|
Re: motor questions
This is kind of one of those "how high is up" questions
 Spraying NOS requires forged pistons...the stock cast pistons are going to be scrap pretty quickly with anything over a 50-75 shot. So once you're that far into the engine, it becomes a question of budget, etc...because you're basically doing a complete build. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
