01-27-2010, 03:07 PM | #1 |
Registered User
Join Date: Feb 2008
Location: Surprise, Ariz.
Posts: 186
|
stock fuel pump
Do i have to change the fuel pump after rebuilding engine?
thanks for the upload help frankyjoet Last edited by frankyjoet; 01-27-2010 at 03:08 PM. Reason: show engine |
01-27-2010, 03:32 PM | #2 |
Account Suspended
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
|
Re: stock fuel pump
No, it won't hurt anything in itself, just be sure it's good so you don't have any fuel issues while trying to start it for the first time for cam break in.
|
01-27-2010, 03:41 PM | #3 |
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Re: stock fuel pump
No, as long as it wasn't giving you problems before the rebuild.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
01-27-2010, 07:36 PM | #4 |
Registered User
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
|
Re: stock fuel pump
If you don't know the history of it, it's a good idea to replace it because if the diaphragm ruptures then it could end up filling the motor with gas. A stock replacement at the auto parts store is pretty cheap. If you've replaced it before and you know it's good, then don't worry about it.
__________________
1977 GMC Sierra Grande |
01-27-2010, 08:26 PM | #5 |
Registered User
Join Date: Jan 2010
Location: Kitchener, Ontario, Canada
Posts: 94
|
Re: stock fuel pump
It really depends on how far you went with the build. If its a bigger cam like 280duration 480lift then iD suggest a high volume pump. If its close to stock than you should be fine.
|
01-27-2010, 08:59 PM | #6 |
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,948
|
Re: stock fuel pump
A stock fuel pump is like 15 bucks is it really worth using the old one?
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
01-27-2010, 09:18 PM | #7 |
The One And Only !!!
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
|
Re: stock fuel pump
If I'm going that far it gets everything replaced.....
__________________
93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
01-27-2010, 09:52 PM | #8 |
Registered User
Join Date: Feb 2008
Location: Surprise, Ariz.
Posts: 186
|
Re: stock fuel pump
Mr T, the cam is an RV 224dur/465 lift. Put new roller rockers valves tapped new springs, new pushrods, crank turned new pistons/redone rods 40ov cyl 40ov. I thought with more hp the pump needs to be changed to a higher gph.
also am dressing engine. Also have new edlebrock carb and ed manifold. Enclosing some pic of engine and truck. thanks for your input frankyjoet |
01-28-2010, 11:04 AM | #9 |
Project Optimus Prime
Join Date: Jan 2009
Location: Dallas, TX
Posts: 346
|
Re: stock fuel pump
might as well..... if your already rebuilding the motor then whats another $20 buck or so
__________________
84 SWB work in progress 89 burb 1500 (parts pig) LOL 08 ford focus (I know, I know) Wifes car "I said it b4 and i'll say it agian wiring is my worst enemy":devil: |
01-28-2010, 11:58 AM | #10 |
Registered User
Join Date: Jan 2010
Location: Kitchener, Ontario, Canada
Posts: 94
|
Re: stock fuel pump
Stock style pump would likly be ok. But I would recommend getting a high volume pump. You dont want it running out of gas at wot.
|
Bookmarks |
|
|